Exhibitors 2016


Result for TAG "Open Source"



SkeMake - Skellefteå Makerspace
Low-cost, open source, make-it-yourself lightsabers made by creative makers from Skellefteå Makerspace through collaboration and co-creation.
  C8 (pav. 7) - SkeMake - Skellefteå Makerspace
 2016

Alexande Shusmky
Innovative muscular electro-stimulator, for recovering/improving a grip movement. Costume made splint for FUNCTIONAL and MOTIVATING rehab! Designed to be managed independently!

Integreight
1Sheeld allows you to use your smartphone as a multipurpose Arduino shield, with sensors, camera, internet, voice control and more.

Christoph Laimer
3d-printed brushless electrical motor with approximately 100W power and 70% efficiency. Copper wire, permanent magnets and shaft are not 3d-printable. in contrast to other 3d-printable motors this motor has enough power to drive for example an RC-car.

Christoph Laimer
A real working 3d-printed Watch with a 3d-printed Tourbillon and a 3d-printed Mainspring.
  C19 (pav. 7) - Christoph Laimer
 2016

Marco Ciccolini
the next generation action cam to capture every aspect

a Lab in the AIR
3D CAD models, lego models and citizen engagement for a better local air quality.

Francesco Ippoliti, Riccardo Zorn, Vincenzo Padula, Chiara Bruni
Design with light. A highly interactive product, where you can trigger several light scenarios and stunning effects.
  D12 (pav. 10) - Francesco Ippoliti, Riccardo Zorn, Vincenzo Padula, Chiara Bruni
 2016

3D Artists
The Alligator Board is a complete and innovative electronic solution for 3D printers, suitable for makers and professionals IoT.

ALLNET.ITALIA S.p.A.
ALLNET.ITALIA is a Value-Added IT Distributor specialised in innovative IT solutions. It was founded in 2000 in Bologna, Italy. It has a strategic alliance with …

Team Arrhenius
The solution to our cold problems, Arrhenius the heater band, try to believe.

Autodesk GmbH - CadSoft EAGLE
CadSoft Computer, makers of the peoples first choice EAGLE Schematic and PCB Design Software. Tailored to meet the needs of professional engineers, makers and s …
  A38 (pav. 7) - Autodesk GmbH - CadSoft EAGLE
 2016

Fablab Imola | Marco Martelli e Daniele Faro
Balance Bike is a cool and replicable bike without pedals that will be appreciate by children, parents and grandparents!
  A16 (pav. 5) - Fablab Imola | Marco Martelli e Daniele Faro
 2016

5A e 5B della specializzazione Elettronica dell'Istituto Tecnico Tecnologico "Allievi-Sangallo" di Terni
Two Ardusumo robots, move in a circular ring, fighting among them.
  A4 (pav. 9) - ITT "Allievi - Sangallo" - Terni (TR)
 2016

BEEVERYCREATIVE
BEEVERYCREATIVE is a Portuguese start-up that develops high quality 3D printing solutions based on FFF (Fused Filament Fabrication) technology. When we develop …

Luca Battocchio
With BICUBE you have on your desk a 3D printer that is able to work with FDM's and SLA's technologies.

Classe 5G corso di Elettrotecnica ed Elettronica - Automazione dell'Istituto di Istruzione Superiore "Rita Levi-Montalcini" di Acqui Terme (AL)
-Open source Braille printer -System control is realized with Arduino Uno. -Mechanical components are realized with 3D printer.
  B6 (pav. 9) - I.I.S. "Rita Levi-Montalcini" - Acqui Terme (AL)
 2016

Open BioMedical Initiative
BOB: the open source, low cost and 3D printed incubator

Bogdan George Nedelciu - 5E indirizzo elettronico - IPSIA F.CORRIDONI - Corridonia MC
Electronic drums managed by Arduino and Processing to teach children to play the drums.
  A12 (pav. 9) - IPSIA "F. Corridoni" - Corridonia (MC)
 2016

Davide Marin
A maker-friendly, low cost modular Braille system that will be used to make a visually impaired people's tablet by Lumi Industries.

Bare Conductive Ltd.
Bare Conductive makes sensing tools for engineers, designers, and makers. Come to our stand for a chance to play with our demos and see what you can make when you combine Electric Paint with the Touch Board. We'll also be showcasing our newest release, the Pi Cap, which combines the power of our sensors with your Raspberry Pi!
  D13 (pav. 7) - Bare Conductive Ltd.
 2016

Sune Pedersen
Faraday Motion is an open platform for personal electric vehicles based on advanced but simple-to-use hardware, software and 3d models.

Classe IV A dell'ITCG "M.Rapisardi" di Caltanissetta
The creation of interactive environment made up of module sensors connected to a control unit in order to introduce the use of coding in automation and robotic in schools.
  C39 (pav. 9) - ITCG "M.Rapisardi" - Caltanissetta
 2016

CampuStore
CampuStore, leader italiano nel mercato dell’education, dal 1994 porta innovazione e tecnologia alle scuole italiane. Con oltre 7.700 scuole e più di 800 dip …

Albert Gajšak, Emil Gajšak, Zoran Gajšak
Arduino, Robots, Raspberry Pi, DIY, game consoles, music players, sound synthesizers. See the interesting work of some interesting technology enthusiast.

Giorgio Colombo, Roberto Mapelli, Ariia Labs - ariialabs.com
CloudGarden bridges the gap between novice gardeners and expert ones: see your plants thrive and share the results for everyone’s benefit.
  B36 (pav. 6) - Giorgio Colombo, Roberto Mapelli, Ariia Labs - ariialabs.com
 2016

Conrad Electronic
For over 90 years Conrad is synonymous with technology. It includes over 750,000 computer products, multimedia, modeling, household items, tools for DIY. At Mak …

FaberLab
A cooker hood that you can program and hack like Arduino.

Michele Lizzit, Daniele Toppano, Marco Ferrari
Copernico PhyLab 2.0 is a system capable of autonomously collecting experimental data and creating plots accessible via web browser.
  C35 (pav. 9) - Liceo Scientifico "N. Copernico" - Udine (UD)
 2016

CREATE-NET
We are an ICT Research Center based in Trento, Italy; the team that will participate to Maker Faire works on Research and Prototyping activities for the Interne …

Istituto Massimiliano Massimo, Crowd4Africa
Crowd4Africa: producing prosthetics using plastic caps. 69 students build and send 3D-printers to Africa through crowdfunding

Skyward Experimental Rocketry
The Cyrano Program is a project of a remote controlled drone developed entirely by students of the Politecnico di Milano.
  B1 (pav. 5) - Skyward Experimental Rocketry
 2016

Giuseppe Santangelo, Fabio Topani, Claudio Becchetti a nome del gruppo Making 3D Printer for 3D World
3D printing using plastic caps and non-industrial consumer devices: a new production process.

+AbiliTeam
A customizable, adaptable and cheap robotic arm, designed with (and for) people having limited mobility, in order to help them in every day action, like eating and drinking.

Giuseppe Caccavale, Daniela Esposito.
DanyBoard M0 is an electronic prototyping platform equipped with an MCU Atmel SAMD21 32-bit ARM Cortex® M0 +. It is equipped with WiFi, a microSD reader, supports single-cell LiPo batteries and is 100% compatible with the Arduino IDE.
  A3 (pav. 7) - Giuseppe Caccavale, Daniela Esposito
 2016

Fabio De Maria
Demas-block is the first hinge to the world that makes possible the locking of the movable frames, an innovative lock-door for shutters, windows, doors, etc ... which allows a locking of the door with the simple act of actuating from the body of command directly on the hinge.

Cristian Andres Gaitan; Daniela Echeverri; Juan Jose Urazan; Fernando Franco Zuñiga
In this project will be announced the process of design, construction and assembly of a tractor simulator that allows provide training and induction for new operators of these machines, integrating immersive and interactive technologies.
  C5 (pav. 5) - C. A. Gaitan; D. Echeverri; J. J. Urazan; F. F. Zuñiga
 2016

FabLab InnovationGym
Fablab Innovationgym presents its first collection of furniture for the new schools lab. Designed to meet the new needs of teaching methods, the furnishings are designed to facilitate the integration of digital devices and hands-on activities.

Digi-Key Electronics
Digikey is an American Company , privately owned with 3500 employees around the world and a total turnover of 1.8B$ per year. From a single point of shipment …
  A5 (pav. 7) - Digi-Key Electronics
 2016

Maffucci Michele, Russo Ludovico Orlando, Mattia Maffucci, Vernotico Silvia
DotBot: an open source robot based on ROS to teachto develop robot applications.
  C25 (pav. 5) - M. Maffucci, L. O. Russo, M. Maffucci, S. Vernotico, G. Ermacora
 2016

Cactus Robotics
Affordable drone racing in RF checkpoint defined racing track. Drone combats using low power lasers and proximity weapons.
  D15 (pav. 5) - Cactus Robotics
 2016

RoboSec Team
Dude is a robot prototype developed for the study of algorithms for autonomous surveillance of indoor environments

EDN Navàs Robotic Students
EDN Simulator Car is part of a final project from two students from EDN Navàs, all make by themselves.
  C19 (pav. 5) - EDN Navàs Robotic Students
 2016

2nd Epal Heraklion, Crete, Greece
Smart Internet Of Things platform for providing better services to patients, visitors, doctors and other hospital personnel.
  D9 (pav. 9) - 2nd Epal Heraklion - Heraklion (Grecia)
 2016

Elettronica Open Source
Elettronica Open Source is a blog providing innovative information, projects and tutorials in many fields of Electronics and Technology including electronics de …

eMotion Tech
eMotion Tech, is a start-up company from Toulouse, France specialised in the creation and sales of 3D printers open source kits. Developed in France in an open …
  C11 (pav. 8) - eMotion Tech
 2016

Buzz Technology Limited, London
Automation that works for everyone - not just a small minority - to help create a better world.

Josh Elijah
A four-legged robot kit designed to get makers into robotics. It can walk, dance and light up but because it's Arduino based it can be used with any sensor to make it do almost anything. A hack friendly robot that is robost, open source and 3D Printed.

Tomas Diez
A FAB City is a new urban model for locally productive and globally connected self-sufficient cities.

Fablab Torino Community
Fablab Torino brings digital fabrication and the Open Source culture in a physical space where machines, ideas, and people can merge and contaminate each other, while learning from one another.

Open BioMedical Initiative
FABLE: the open source, low cost and 3D printed myoelectric hand for everyone.

Collettivo Cocomeri
Felfil Evo is a plastic filament extruder, that will allow anyone to autoproduce the filament for their own 3d printer, using plastic wastes, wrong 3d printed elements and industrial pellet.

Manuele Cordisco
A fully customizable audio-lighting effects for any kind of device that requires the emission of specific lights and sounds (Eg. Movie prop / replica collectibles / exhibition weapons etc.)
  C17 (pav. 7) - Manuele Cordisco
 2016

Edoardo Parini
Get is the perfect bridge between smart-watches and smart-band. It's the most intuitive controller, handset and receiver directly on your wrist.

Mirco Piccin, Matteo Ferrario, Turi Virgillito
Gioco della cartotecnica: choose your object from a touch cardboard panel, after a few minutes the machine will give you your object ready to be folded and assembled!

Robotics Brain and Cognitive Sciences, Istituto Italiano di Tecnologia
Glassense is a wearable assistive device: it is a pair of smart glasses designed to increase the spatial awareness of persons affected by partial hearing loss. It enhances the speech comprehension capabilities of the user.
  B18 (pav. 6) - Robotics Brain and Cognitive Sciences, IIT
 2016

Luka Mustafa & Institute IRNAS
GoodEnoughCNC machines are simple, affordable and useful open hardware cnc machines built with standard parts, which can be assembled with basic hand and power tools in any garage.

Gianpaolo Franceschini, Andrea Sartori, Livio Talozzi
Greenspace Invaders is a videogame for schools. It is made by software and hardware, where, shooting bulldozers and concrete blocks, you fight against deforestation and land use with a space ship like the 'Space Invaders' one.

Gabriele Carloni, Luca Astolfi
If FabLab it's a gym to do and build, it must have the tools to do gymnastics with the G-Code. So was born Gym-Code, the maxi robotic arm for educational purposes in industrial automation.

Giulio Pompei
Do you speak science? is a project about science and science experiments. It's based on a Youtube channel with videos and tutorials and for his engaging activities has already been awarded at the Maker Faire of Rome 2014 and Trieste Mini Maker Faire 2016.

Cesare Pizzi
OpenSource Modular tracking and identification system for pets
  A13 (pav. 6) - Cesare Pizzi
 2016

3F e 3G del Liceo Statale "M.Curie" di Giulianova (TE)
Students use innovative technologies to make the cultural heritage in their city accessible to blind people.
  C3 (pav. 9) - Liceo "M. Curie" - Giulianova (TE)
 2016

Makerspace della Biblioteca Multimediale "R. Sassi" di Fabriano
The first Scratch hologram game made by young makers for young makers!
  C27 (pav. 9) - Makerspace della Biblioteca Multimediale "R. Sassi" di Fabriano
 2016

1st Junior High School of Papagou, 3rd Grade (C Gymnasiou)
An electronically controlled ROV based on Open-source software for real-time monitoring of the aquatic environment.

SENZA BENZA IIS Ferrari + Casa Corsini
Celerifero is a 3 wheel velobike Z.E.V (Zero Emission Vehicle) with electro-muscolar, human power propulsion for light urban mobility.

Confartigianato Imprese, Polifactory, IRD Modena, Columbus Cinelli, Caren Hartley, Richard Sachs, David Mercer, BAUM, Cherubim
5 outstanding frameworks realized by 5 outstanding artisans from the 5 continents and a crowdcrafted bike for Milan
  B15 (pav. 8) - Innovazione e bellezza globali a due ruote
 2016

Emiliano Gatti, Fabio Ferrarini, Paolo Cirinei
The Italian robot for teaching in primary and secondary schools to learn the basics of robotics and coding
  C20 (pav. 5) - Emiliano Gatti, Fabio Ferrarini, Paolo Cirinei
 2016

LITER OF LIGHT
The Kerosene Lantern 2.0 of LITER OF LIGHT might be the solution to the energy poverty in the developing countries

Luka Mustafa & Institute IRNAS
Koruza is first open source wireless optical communication system for urban environments, connecting locations at up to 150 m distance with 1 or 10 Gbps link capacity .
  D10 (pav. 8) - Luka Mustafa & Institute IRNAS
 2016

WASProject Team
WASP submits the Maker Economy Starter Kit, an exportable Project that sustains a New Model of Economic Development based on the Makers’ Culture.

Piero Santoro, Carlo D'alesio e Massimo Di Filippo
MEG, Micro Experimental Growing, is a smart green house, internet connected and powered by tunable spectrum LEDs, that guarantee an high Photosynthetic efficiency at every stage of plant life.
  A1 (pav. 6) - Piero Santoro, Carlo D'Alesio, Massimo Di Filippo
 2016

Francesco Ficili
Modular System for implementation of IoT applications.

Pasquale Barrega, FabLabME
Digital electronic metronome arduino based with graphic display. Beat signaling is optical (trough two LED) and acoustic.

Sergio Barbieri
MicroRobo: Imagine, draws, cut, paste, color. Create your unique microprobe. Share his picture with the world.
  D11 (pav. 9) - Sergio Barbieri
 2016

Fabia Ciccone, Samuele Miatello, Marco Piscopo
MOOOR is a connected devices system that allows a smart home control, enabling new interactions with the user.
  b34a (pav. 7) - Fabia Ciccone, Samuele Miatello, Marco Piscopo
 2016

Mouser Electronics Inc.
Mouser Electronics is a worldwide leading authorized distributor of semiconductors and electronic components for over 600 industry leading manufacturers. We spe …

Microcontrollers Users Group Roma Tre + Francesco Delussu, Valerio Dodet, Federico Giulianelli + Andrea Nicosanti
MUG Roma Tre shows at Maker Faire a social urban garden and some projects of Roma Tre students.
  B15 (pav. 6) - Microcontrollers Users Group Roma Tre
 2016

Classe IV ind. Elettronica ed Elettrotecnica articolaz. Automazione; I.I.S "C. Rosatelli" di Rieti
A low cost and real time monitoring of the water pressure in Rieti waterworks. Data available via smartphone or web.

Future Food Institute
MFR Officucina will be made of 5 food areas taken from IFTF Seeds of Disruption Map (food production, distribution, manufacturing, shopping, eating through the showcase of prototypes from international makers and startups

OnosTeam
Onos is a project that allows anyone to install a home automation system without technical knowledge requirement.

La Cool Co.
La Cool Co. develops open source gardening platform aimed to improve the well-being of any kind of plant, and to be a toolkit for education on sciences and electronics.

Andrea Marenghi, Valerio Campari
OpenBuilds is a modular linear guide system according to requirements to create a robust and precise mechanics.

WeMake
A global community working together to make open and collaborative health and social care solutions.

Alessio Canalini, Christian Gabbani, Alberto Petronio
"OpenROV in Italy" is a project to promote activities related to edutainment, to diffusion of new technology and to exploration. Our goal is to found a startup able to support themselves.
  A1 (pav. 5) - Alessio Canalini, Christian Gabbani, Alberto Petronio, Alexandru Cosmin Crisan
 2016

Alberto Valente, Angelo Camesasca
Urban garden in cloud.

silvio scena
Modular Musical Instrument. Each module (1 octave, 12 dynamic keys ) can be used individually in stand-alone mode or assembled with others composing a full piano keyboard.
  D9 (pav. 7) - silvio scena
 2016

GianPaolo Franceschini
Potty Plant Monitoring System. The easyest way to take care of your plants problems: 1. Can we automatically water plants when i go on vacation or do i have to bother my neighbors? Yes 2. Can we know if the soil actually needs to be watered? Yes 3. Can we manually water the soil from remote location? Yes

PRUSA Research 3D printers by Josef Prusa
Prusa Research was established by Josef Prusa, one of the core developers of the Open Source project RepRap. His Prusa i3 is according to 3DHubs the most used 3 …
  C13 (pav. 8) - PRUSA Research 3D printers by Josef Prusa
 2016

Istituto Italiano di Tecnologia
R1- “Your Personal Humanoid”- is the new humanoid of IIT – Istituto Italiano di Tecnologia. Autonomous, variable height, weight 50 kg, 50% plastic and 50% carbon fibre and metal, it is designed to operate in domestic and professional environments.
  D1 (pav. 10) - ISTITUTO ITALIANO DI TECNOLOGIA
 2016

Lukas Satin, Libor Micek
Real Magic is a technology to control everything with your finger or body sensor! From robots, 3d printers to PC apps, mobile & VR apps. Supported platforms: PC standalone, mobile, VR (Google VR, Samsung Gear VR, Oculus Rift, OpenVR), smart TV, Android, iOS. We bring a healthcare & DJ product based on this platform to you and we are looking forward to your new creations!
  B45 (pav. 6) - Lukas Satin, Libor Micek
 2016

Regione del Veneto
In January 2015 Veneto Region launched the Veneto Fablab Call for proposals. 2.000.000 euro have been invested in order to push digital transformation of Veneto …

Scuola di Robotica - Facoltà di Architettura di Genova - Associazione Artù di Piacenza
Roboable is an interactive device for children with special needs. This device is link to Scratch and to hands on activities.
  A10 (pav. 7) - Scuola di Robotica - Facoltà di Arch. di Genova - Ass. Artù
 2016

Classe 4A automazione, ITI Fermi Modena, Mescoli Marco, Luciano Bassoli, Franco Melchionna, Federico Carnevali, Andrea Gavioli, Benito Mario Totaro.
Two wheels robot on triangular base, assembled with hot glue to allow for creative experimentation. The total cost is 50 euro.
  C42 (pav. 9) - ITI "E. Fermi" - Modena (MO)
 2016

Simone Primarosa
Roboprime is a humanoid robot made with Arduino, born with the aim of introducing young people into the world of robotics.

Skyward Experimental Rocketry
Rocksanne 2A is a 4,3 meter high supersonic sounding rocket developed by a team of students in Politecnico di Milano.
  B1 (pav. 5) - Skyward Experimental Rocketry
 2016

RS Components S.r.l.
RS Components is the leading distributor of Electronic, Electrical & Industrial components.

Daniele Ingrassia
satshacopter 250X is an open source quadcopter built around the satshakit flight controller. It is designed to be simple and cheap as much as possible, and to be easily made inside any Fab Lab.
  D17 (pav. 5) - Daniele Ingrassia
 2016

Daniele Ingrassia
satshakit is a family of general purpose DIY microcontroller and 100% Arduino compatible boards that can be used as brain of you projects and that is possible to make with standard FabLab equipment. satshakit has been used and customized inside 2016 FabAcademy final projects.
  D17 (pav. 5) - Daniele Ingrassia
 2016

Sculptr
The Sculptr Delta is a low cost, simple, efficient, vesatile and very evolutive 3D printer created for everyone.

FAMO COSE Roma Makerspace - Luca Magarò, Mirko Schwiedrzik, Sergio Barbieri, Massimiliano Dibitonto, Valerio Ciampicacigli
A contemporary reinvention of the classic Shakers design philosophy, created in a roman makerspace.

Carmelo Fallauto, Simone Corbellini
µPanel is an innovative system for adding to any electronic device Internet connectivity and for creating APPs that permit the remote control from the smart phone.

Alessio Fanelli, Andrea Santilli
An open source home automation ecosystem for makers.
  B24 (pav. 7) - Alessio Fanelli, Andrea Santilli
 2016

Mirco Piccin, Giulio Pilotto
SmartRFID is an open source project aimed for FabLab or similar space, where there’s the need to monitor entrance and the conduct of machines / tools by using RFID tag / card, and to monitor power consumptions of the utilization.

Bánki Donát Technical High School - Bánkirobot group
The Suit makes the work of the firemen safer, and easier.
  D6 (pav. 9) - "Bànki Donát" Technical High School - Nyìregyhàza (Ungheria)
 2016

Michael J. Samuels
Musicalized polyhedrons that users spin, bounce, and wave to control sound, DJ, generate visuals, and even navigate Virtual Reality.

Irene Lanza, Marco Manca, Henrik Kjeldsen, Luca Pedrelli
The world shouldn’t cater to you. People have different experiences of the world, and alternative sets of solutions. Embrace and nurture variety: SoundSight Training!
  D10 (pav. 6) - I. Lanza, M. Manca, L. Pedrelli, G. Ferioli, L. Ferioli
 2016

Viudì
Ethnic inspiration for instruments with electronic and mechanical amplification.

Officine Tesla
TACTO is a social music instrument that turns your daily life into a collective sound creation.

Techmakers.io
We will present a platform to gather data from the physical world and can interact with it through our electronic platform Rotilio and our Lampadilio lamp can m …

Andrea de Quagliatti
A new Computing Platform that overcomes Moore's Law restrictions to achieve the ultimate level in productivity - and foster the Singularity!

Sanne Cools
An open source series of workshops to foster STEAM education in primary schools using storytelling and electronics.

Stephane Magnenat, Martin Voelkle, Ramiz Morina, Maria María Beltran, Christophe Barraud, Amaury Dame, Pablo Márquez Neila, Michael Huber, Francesco Mondada, Moti Ben-Ari, Morgane Chevalier
Learn to program through an incredible quest mixing robotics and augmented reality.
  C10 (pav. 5) - Mobsya Association
 2016

Alessio Fabrizio
Toowheels is an open source wheelchair, design to be completely DIY. The project is born like a sport-wheelchair, but is now converted for different activity.

Andrea Santilli, Alessio Fanelli
The open source development board for the Internet of Things.
  B24 (pav. 7) - Alessio Fanelli, Andrea Santilli
 2016

Daniele Loddo -- Daniele Ricci
The Poor robot it is project for transforming a machine in an autonomous robot with sensors. The robot can move autonomously or controlled of PC or smartphone.

5th General Lyceum of Kavala-Greece
Fully-functional humanoid robot, with eye and head independent movements, 5 DOF in each arm, 16 DOF in each hand and operational with voice commands.
  B18 (pav. 9) - 5th General Lyceum Of Kavala - Kavala (Grecia)
 2016

UDOO
At Maker Faire, we will present our range of open source boards born for Makers: the UDOO boards, with particular evidence on the new born of this family: the U …

Johnathan Yen
Better prints in style with your Ultimaker
  C26 (pav. 8) - Johnathan Yen
 2016

Verona FabLab
Urbike is a smart sharing and locking system for bicycles that allows the cyclists to park everywhere in the city.

VentolTWO Development Team
VentolTWO is an Open Source Vertical Axis Wind Turbine for Developing Countries, to give everyone wind power with low environmental impact.

Watterott electronic GmbH
Watterott electronic is an electronics company specialized in Open-Hardware, DIY (Do-It-Yourself) and development components. The company was founded by Stepha …
  D26 (pav. 9) - Watterott electronic GmbH
 2016

Open BioMedical Initiative
Project WIL: the open source, low cost and 3D printed mechanical hand for everyone.

De Simone e Ruggeri classe 5 Indirizzo Informatica I.I.S.S Ettore Majorana Seriate
Willy is a robot that recognizes and moves blocks according to their color and is able to execute vocal commands.
  C41 (pav. 9) - IISS "E. Majorana" - Seriate (BG)
 2016

Filippo Barbieri
WiLock is an electronic motorized lock system for door managed by Smartphone/Mobile Phone, SmartWatch, Computer and SmartTV via app, local area network and Internet.

Christoph Laimer
3d-printed wind-powered turbine, using it's own propeller-blades as a display for all kind of messages. It's a demonstration of the potential, when interdisciplinary maker-skills are combined.

+AbiliTeam
Z/2 is a cheap, small and transportable printer; it can print tactile graphics and images necessary for the education of the blind people.
 
Data updated on 2020-12-13 - 11.41.04 pm