Exhibitors 2019


Result for TAG "Internet of Things"



Nicola Coppedè, Andrea Zappettini, Michela Janni, Filippo Vurro, Riccardo Manfredi
Bioristor is and innovative biocompatible sensor to monitor plant sap
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Tiziana De Filippis, Leandro Rocchi, Patrizio Vignaroli, Elena Rapisardi, Bruno Guerzoni
Climate Services Open Source for developing countries. Climate services are important to foster adaptation to climate risks and in reducing vulnerability in developing world contexts. 4Crop web application gives the possibility to evaluate impacts due to drought stress during the whole crop growing cycle in Sahelian areas. SLAPIS (Système Local d’Alerte Précoce pour les Inondations de la Sirba) enhances the capacity of Niger Institutions to forecast, alert for and manage floods.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in a functional fiber that monitors athlete dehydration by their sweat analysis
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in flexible porous polymer, used ina plantar sole for monitoring walking positions
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

I.I.S.S. Calamatta di Civitavecchia
"i-Keel" is an innovative and advanced system for pleasure and competition sailboats, once installed, can increase their efficency, performances and maneuverability. This is an advanced system of tilting keel, retractable and intelligent bulb with azimuth propulsion. The group of makers is made up of the students of classes IVATTL and VC of the I.I.S.S. "Calamatta" Institut of Civitavecchia, under the supervision of the Tutor Professors Prof. Andrea Sciacca
  A17 (pav. 5) - IISS L. Calamatta - Civitavecchia (RM)
 2019

Andrea GASPARRI, Renzo CARPIO, Jacopo MAIOLINI, Ciro POTENA, Giovanni ULIVI
PANTHEON is developing the agricultural equivalent of an industrial Supervisory Control And Data Acquisition (SCADA) system for the precision farming of hazelnut orchards.
  B14 (pav. 9) - Laboratorio di Robotica - Uniroma3 Ingegneria
 2019

STUDENTI ITS MOBILITA' SOSTENIBILE TRASPORTI CATANIA
The picking management through augmented reality makes order preparation more fluid, reducing management costs
  C23 (pav. 6) - ITS 4.0
 2019

Massimo Barbaro, Paolo Meloni, Matteo Soccol, Antonio Perra, Silvia Loddo
ACUADORI is a distributed wireless sensor platform to accurately remotely measure the water stress level of vineyards.
  D14 (pav. 3) - EOLAB - Università di Cagliari
 2019

Studenti della Classe 5AO AS 2018-2019 IIS Volterra-Elia Ancona
Home automation system for monitoring the quality of air at home and in classrooms. Temperature, Humidity, CO2, PM10, PM2.5, VOC
  D9 (pav. 5) - IIS Volterra Elia - Ancona (AN)
 2019

Astra Tech&Design
Linear floor lamp with bulb shape. The LED stick can also be activated through the App for mobile devices.

Alan Advantage
Alan Advantage srl, with offices in Rome and Boston, is active for more than ten years in Innovation, deals with strategic consulting activities. The company …

Giuseppe Massaria, Antonio Idà
ALAN-2 is a tracked Robot for military use. It has GPS, supports automatic learning, autonomous navigation and the NAV function with which it is possible to give a mission. The ROS system combined with a Neural Network provide access to the A.I. It is equipped with a Smart Charging Station (custom).

Albicchiere Team: Massimo Mearini, Diego Pepini, Emanuele Pangrazi, Luigi Palumbo.
albicchiere is the smart wine dispenser that allows bringing the consumer experience to a higher level, serving them the best glass of wine: at the ideal temperature and always as if it were just opened.
  D4 (pav. 3) - albicchiere
 2019

Lino Strangis
It is a multimedia installation based on liminal linguistic research that combines the experimental use of virtual reality with electronic research music, 3D sculpture and performance in a concept with multiple metaphorical facets.
  D17 (pav. 3) - Pasqualino (detto Lino) Strangis
 2019

Associazione Medici di Famiglia per l'Ambiente di Frosinone e Provincia - FabLab Frosinone APS
Ancler®: simple and inexpensive real-time atmospheric monitoring. An ethical project to safeguard health and the environment, against pollution.

FONDAZIONE ITS FILIERA AGROALIMENTARE DELLA SARDEGNA
Anzone4.0 is a system designed to manage the traceability data of the IGPSardinian lamb from the stable to the slaughterhouse.

Colegiu Tehnic Gheorghe Cartianu, grades 9-12
Main objective: the development of technological education in order to have well-prepared students which can be capable to master and efficiently explore the new technologies.

Arrow Electronics Italia s.r.l.
Arrow is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. …

Associazione Nobilita
Association Nobilita has as its objective to put into practice ideas that can bring work. We are convinced that work is an instrument to dignify and Associatio …
  D3 (pav. 7) - Associazione Nobilita
 2019

Unione Astrofili Italiani
This Project presents the design and construction guidelines for a small personal remote observatory
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

Eye-Tech srl
Sistema di Realtà Aumentata per la manutenzione predittiva in ambito Industria 4.0

Andrea Motroni; Fabio Bernardini
AURORIS aims at inventorying and locating things or people using RFID technology with high accuracy and in real time.

Odoardo Savo - Stefano Palone
Smart autotracking 360° camera
  E37 (pav. 8) - NewLab Design
 2019

Simone Cardillo, Vincenzo Gerardi, Emiliano Sacchetti, Alessandro Del Signore, Riccardo Placitelli, Lorenzo Conti, Davide Fiore.
NANO© by BioPile is an automatic indoor growing device. It can grow many king of vegetables and plants by a patented technology and a research lever software. It also recycle water and filters Co2 constantly.

Blue_Boost Project - ADRION Programme
Blue_Boost project - ADRION Programme – brings together 7 partners from Italy (University of Camerino – Marche; Central Europe Initiative - Friuli Venezia G …

Il progetto è stato realizzato da un team distudenti e docenti della Fondazione ITS Steve Jobs in collaborazione con Paradigma soc. coop con sede a Catania
Since 1953, vending machines continue to function in the same way. Boox offers an advantageous experience for both users and sellers
  B7 (pav. 6) - ITS 4.0
 2019

Brunetti Fabio, Calandrin Marco, Nardin Andrea, Virzi Gabriele, Pasqualotto Giulio
With this project we aim to create a new way of managing and designing buildings, exploiting the new 4.0 technologies such as augmented reality and IOT (internet of things).

CampuStore
CampuStore brings new ideas and visions at Maker Faire Rome, again: close to the Kids Area organized by Codemotion Kids!, CampuStore takes part to the exhibitio …

I Cibernetici
The Smart IoT accident-prevention helmet allows you to monitor the worker on site so as to know any dangerous situations and warn with alarms.
  D32 (pav. 5) - ITI A. Pacinotti - Fondi (LT)
 2019

Giorgia Pontetti
CHEF, an innovative, compact, sterile, fully computerized hydroponic Vertical Farm, for healthy and clean cultivations at 0Km.
  C1 (pav. 3) - G & A Engineering - Giorgia Pontetti
 2019

ELENA LUZI
Chokkino is the first cacao espresso, the functional beverage made with pure cacao, the perfect alternative to coffee!

Cleep Team
Cleep is the 13 MP camera you can wear like a bracelet, it allow you to take photo and videos directly from your wrist easily and hands free.
  H22 (pav. 6) - Cleep Wearable
 2019

Mat Toan
Cluster is a holographic polygon that reflects the reality it has in front of itself by modifying its shape with each perceived sound.

Fabio Musmeci
Arduino based sensors network for monitoring in vessel compost systems

Conrad Electronic Shop
GIVE LIFE TO YOUR IDEAS Every invention begins with an idea, with a precise image that buzzes in your head, insists and wants to be realized. This is what give …

Associazione Promozione Sociale SalvaiCiclistiRoma
A low cost device to monitor biker, pedestrian and runner traffic along a cycle path. A tool helping citizens to call pubblic officers and politicians attention to their needs.
  E9 (pav. 3) - Gatti della www.ReginaCiclarum.it
 2019

Jasmin Velagic, Nermin Covic
The control system for both remote and autonomous controls of a hexapod robot is developed.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Cubbit | M.Moschettini, S.Onofri, A.Cillario, L.Posani
Let’s recycle the internet we waste to create a green & encrypted cloud that is forever-free for its users!
  E8 (pav. 8) - Cubbit | M.Moschettini, S.Onofri, A.Cillario, L.Posani
 2019

Daniele Loddo & FabLab Ostia
Cucciamatic takes care of the management of our dog and is able to: -Provide the right ammount of water and food, during the hours set by the owner; -Control our dog with a webcam via the Internet; -Provide a resting place with the right temperature for the dog.
  D19 (pav. 7) - Daniele Loddo & FabLab Ostia
 2019

Studenti della classe 4C (coordinati dai Prof. Roberta D'Agostino e Daniele Impellizzeri) - Istituto Tecnico Agrario “Giuseppe Garibaldi” Roma
Cyber Healthy Farm is an IOT, modular, extensible, portable, cost-effective and eco-sustainable system that automates the cultivation and irrigation systems of a farm.
  D24 (pav. 5) - ITA Giuseppe Garibaldi - Roma (RM)
 2019

ITS CUCCOVILLO
The objective of the project is to create a prototype capable of acquiring the moisture data from the soil and independently managing the quantity of water to be supplied to the soil to prevent the affected plant from going into water stress

Digi-Key Electronics
Digi-Key è una società americana, di proprietà privata, con 3500 dipendenti in tutto il mondo e un fatturato totale di 2,3 miliardi $ all'anno. Da un unico p …

Elio Romano, Alex Filisetti, Annamaria Stellari
This project is part of a broader research project concerning precision agriculture, that is, that set of techniques that allows reducing the use of inputs in agriculture (water, fertilizers, plant protection products, labor, processing, etc.) while increasing yields thanks to intelligent systems that, monitoring the environmental conditions, provide information and early warnings to farmers who will be able to intervene more effectively and in a targeted manner, gradually abandoning the rigid patterns of the past.

Leonardo Crini, Michele Meattini, Francesco Ridoni, Francesco Ferranti
Domotech is a system that allows you to make your electrical system domotic in a very trivial and simple way.
  D20 (pav. 5) - ITIS Galileo Galilei - Arezzo (AR)
 2019

Alkemy Lab
DreAm/r is an Interactive Installation about New Advanced Bio Materials for an Immersive Experience in Augmented Reality and IoT.

Maksym Ukhanov
Droppity it’s a WiFi IoT box with bunch of plant sensors and water pump for automatic plant caring.

Gymnasium Vukovar, Junior class (17 and 18 years of age), second team
Our seismograph will be able to track and send all the data in real time from the accelerometer to the microcontroller Genuine Arduino MKR 1000 wifi. The collected data readings are sent to the Internet through always active Blynk server ( http://blynk2.croatianmakers.hr ), of the Institute for Youth Development and Innovativity (IRIM).
  D14 (pav. 5) - Gymnasium Vukovar - Vukovar (Croatia)
 2019

Del Vecchio Gianluca- Daniele Leone classe IV AE - ITIS " G.Galilei"_IIS Pontecorvo
All the space in a small space. Suitcase suitcase with vacuum compartment, GPS and digital scale

Alessio Vaccaro
The objective of the project was the realization of a monitoring and control device capable of self-feeding exploiting the energy resources of the surrounding environment.

Elaisian
Elaisian, the first precision farming for olive oil

EMC Elettronica Srl
Elettronica Open Source is a blog born in 2006 with the aim of spreading quality articles and allowing the exchange of ideas and experiences between electronics …

Francesco Colasante
Innovative, dynamic and customizable fragrance diffuser.
  A2 (pav. 7) - Sapienza Università di Roma - Saperi&Co
 2019

Fabio Algieri, Gabriele Cantino, Nicolò Castagnoli, Erik Giordanetto, Giovanni Lipari, Lorenzo Ogliara, Loris Salomone
System to impose rotations of attitude and orbit of small satellites (CubeSat) for their effective testing in a terrestrial Lab.

ESA/ESRIN and the Φ-Lab
Come experience the Earth and the Moon in Virtual Reality and get to know more about ESA and Φ-Lab activities!

Alessandro Cammerata, Roberto Mortaro, Luigi Benedetti, Simone Figorilli, Paolo Menesatti
A solar-powered “pasta dryer” managed the IoT technology.

Fondazione EAT ITS Grosseto
The project was born from the experiences of internships of young people gained last year, where they experimented with numerous work experiences in the company, understanding their needs and opportunities that could be achieved thanks to the use of technology. The result was the partnership with the organic company "La Selva" with the aim of creating a label compatible with augmented reality technologies that would allow us to overcome the "regulatory" and physical limits of current labels, adding useful information such as supply chain and other informative and promotional contents.
  B9 (pav. 6) - ITS 4.0
 2019

Sapienza Università di Roma - Saperi&Co
Sapienza Università di Roma attends the Maker Faire 2019 - with the coordination of Saperi&Co. research and service infrastructure of the Sapienza University of Rome, whose aim is to promote outstanding applied research and to support innovation , with 18 related Departments, 4 lab on demand, a Fab Lab, a Workshop, a Coworking and a Training area, will open in October 2019. The theme chosen is "Experiment it - Do it - Play it", to talk about applied research topics with a high rate of innovation that Sapienza expresses in various fields and disciplines, from research up to the realization of real and true own products.

Team: Idealizer: Weslley Lioba Caldas Coordinator: José Gleisson da Costa Germano Advisor: Sandro Costa Mesquita Researcher: Tiago Diógenes de Araújo
The project consists in a glasses for visually impaired with the objective of aid the user's displacement,giving a better independence.
  A4 (pav. 6) - Pixels Escola de Design e Tecnologia
 2019

Credits Jie Zhang, Architect and General Manager at Pelli Clarke Pelli Architects​  Raffi Tchakerian, Assistant Professor at Dubai Institute of Design and Innovation (DIDI) Sayjel Vijay Patel, Assistant Professor at Dubai Institute of Design and Innova
Eyemotion interprets emotions from the facial expressions of people as new environmental factors that are manifested through a shifting display of colour and form as corollaries to a spectrum of psychological states, as either reinforcement or intervention.
  C17 (pav. 7) - Dubai Institute of Design and Innovation
 2019

Fabrizio Di Vittorio
VGA Controller, PS/2 Mouse and Keyboard Controller, Graphics Library, Game Engine and ANSI/VT Terminal for the ESP32
  E27 (pav. 8) - Fabrizio Di Vittorio
 2019

Associazione Verona FabLab
The FabVan (Fabrication Van) is a mobile experimental laboratory for social innovation provided for the local community.

Fondazione Mondo Digitale
Fashion Digital Night is the initiative, promoted by the Fondazione Mondo Digitale, with the aim of accelerating the digital transformation of the fashion sector and developing new skills and professional profiles among young people.

Filo srl - Tata
Filo is an Italian company, founded in 2014 that provides smart-tech products and solutions, in the tracking field. We believe in useful solutions for people, c …
  B25 (pav. 8) - Filo srl - Tata
 2019

Be-Team another amazing project by yu-scan Ltd
Taking your EEG brain signals and its up to you to make a storm. Or maybe destroy your opposition. Come play.

Flywallet SRL
With a unique device: payments, identity documents and subscriptions have never been so simple.

Fondazione Bruno Kessler
FBK is a public research Institute in Italy, ranked at the top places for scientific excellence within different subject areas, like ICT, microelectronics, hist …
  B16 (pav. 8) - Fondazione Bruno Kessler
 2019

Corso articolazione Elettrotecnica ITI "A. Russo" Nicotera (VV)
Our Frank seemed lost forever... but willing students brought him back to life!
  D3 (pav. 5) - ITI A. Russo - Nicotera (VV)
 2019

Gianluca Ciuffreda, Alessandro De luca
Let's have fun while learning electronics and building smart devices ! Programmable electronic boards in assembling kit, equipped with schematics, components and instructions so that users can have fun while learning electronics.

Salvatore Pepe, Mariangela Pepe, Marco Capani
Graffiti for Smart City was born from an idea of installing smart mosaics in the main cities of the world.
  A7 (pav. 3) - Graffiti For Smart City
 2019

Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems

Francesco Rodighiero (Tutor), Ludovico Russo (Sviluppo Software ed Elettronica), Alessio Crivelli (progettazione 3D e Hardware), Teo Bistoni (Supporto programmazione), Daniela Meroni (Organizzazione, supporto sviluppo e collaudo), Rossella Indaco (Support
A tactile map of Italy presents buttons for each region. When the buttons are pressed, audio tracks are reproduced that describe various aspects of the region.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019

STEAM Atelier
HAELLO is an open innovation project around wearable technologies in artistic disciplines that involve the use of the body and data, both physical and biological, produced by it.

Niccolò Calandri, Riccardo Balzaretti
Hive-Tech is the first IoT-AI Beehive remote monitoring system.

Hoist Finance
Hoist Finance is a trusted debt restructuring partner to international banks and financial institutions. We are specialised in serving banks in handling non-per …

ACMECUBO SRL
In Industry 4.0 sector, HOLO is an innovative and interactive holographic system presenting 3d virtual models.

TheEngineRoom/EMAROlab, Università di Genova
HRI++ aims at showcasing possible, futuristic human-robot interaction modes.

Giorgio Maracchioni, Arellano Munoz Jimmy Alexander,Torri Federica, Piermaria Alessio, Brogini Ginevra
iFew (interactive Future Effectiveness Water): smart bottle that exchanges cloud data with iFewApp, provide mineral blends customized to individual needs

Il Brevetto - Giornale delle Invenzioni
The “Genius” is the main theme of the magazine “The Patent”, the curiosity and passion for innovation are the values of an editorial staff that was born …

HeretiX Technology
Will presents a range of products designed for lighting industry and complex architectural scenery: Wire Controllers and Wifi Floodlights
  F8 (pav. 6) - HeretiX Technology
 2019

Pallottino F, Figorilli S, Menesatti P, Scarfone A.
Pilot plants based on rims technology (Recirculating Infusion Mash Systems) and temperature pid management for research & development in the brewing and distillates chains.

SIRSLab Group
INBOTS project brings together experts from different disciplines and European countries involved in the understanding and acceptance of Interactive Robotics.

Luca Elisei
Objective of the project: development of an Industrial IoT solution able to estimate the deformations and therefore the stress of the wind turbines in order to maximize the residual life cycle and optimize the production capacity.

Loic De Buck
Industruino is bridging the world of makers and industrial automation.

Fondazione ITS D.E.Mo.S.
The project was created with the aim of modifying the production process of peeling almonds through the use of innovative technologies.

Raffaele Ferrante, CEO. Daniele Bianchi, CTO. Marco Mannisi CPO.
Low-cost personalised custom-made foot orthotics using IoT and 3D printing

Giovanni Mannara
Arduino Solar Tracker, a fast and efficient project to safeguard the environment. Solar tracker is not only easy to use but is also inexpensive.

Eugenio Sabatella e Massimo Marini
IoT network for critical infrastructures and earthquake monitoring system
  E6 (pav. 8) - PROESYS
 2019

Marco Ronchetti, Tiziano Lattisi, Hyeon Kyeong Hwang
Multimedia Recording box is IoT based solution that transforms lectures into digital canvas where students can annotate, collaborate and review.
  A16 (pav. 7) - Università di Trento
 2019

JLCPCB
Shenzhen JLC Electronics Co., Ltd., established in 2006. JLCPCB is a top domestic manufacturer for PCB prototyping. With a production capability of over 200,0 …

Giovanni Mannara
This project is a home automation in miniature ... It is not a normal home automation but it is an innovative house that points to the future because it is also environmentally sustainable.

Domenico Formenton
minimum is a complete, inexpensive, easy to use and very simple installation automation system for home automation

Dipartimento di Informatica, Università di Verona
Innovation research and teaching in the new ICE Lab at University of Verona.

Paolo Rocco e Andrea Maria Zanchettin
Collaborative robotic assembly with use of vision and artificial intelligence algorithms to perceive the operator and predict his/her intention.

main author: Mario D’Ettorre, Armando Altieri, Roberto Seghini co-author: Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
Led Hockey Game based on multigame Led Interactive Platform v. 2.0
  F22 (pav. 8) - TecnoStudio Ars Innova - studio tecnico
 2019

Libertà di vivere - ITS Meccatronico - Treviso
A device that aims at increasing the mobility of people with lung capacity handicap and treated with home oxygen therapy

Il progetto è stato realizzato nel corso di Cyber-Physical Systems, gli autori sono: Federica Pascucci, Sara Acquaviva, Elena Bernardini, Matteo Castellani, Gianmarco Frangini, Filippo Magri, Giulia Perri, Jie Tan.
MAESTRO is a smart bin able to recognize and properly recycle thrash using artificial intelligence

Francesco Re
"Maintenance 4.0 for Dr Robot" is an advanced maintenance system at the service of an innovative surgical robot developed by the start-up Valuebiotech.

4 - 5 Elettronica - IPSIA "Antonio Guastaferro" - San Benedetto del Tronto (AP)
Mec_Lab 4.0 is a Mechatronics IoT system (Internet of Things), able to reproduce on a scale model some steps of an industrial production process. The integrated App. IoT allows to send the production data to a Cloud, as well as some enviromental sizes (Temperature, humidity and air quality (VOC)) in the workplace.
  A14 (pav. 5) - IPSIA - Antonio Guastaferro - San Benedetto del Tronto (AP)
 2019

Melopero S.r.l.s.
Melopero Electronics, Raspberry Pi Approved Reseller, produces and distributes electronics for IoT.
  B14 (pav. 8) - Melopero S.r.l.s.
 2019

Francesco Ficili, Anna Falco, Antonio Volpe
The Mercury System is a modular HW/SW development system which simplifies design and implementation of Connectivity and IoT applications.
  E2 (pav. 8) - Francesco Ficili, Anna Falco, Antonio Volpe
 2019

Annamaria STELLARI, Paolo Walter ANTONIOLI, Tiziana M.P. CATTANEO - CREA.IT Milano e Treviglio
Mini dryer and solar dehydrator for food processing, equipped with sensors in the near infrared (NIR), camera and Arduino technology for the control of physical process parameters.

main author: Roberto Seghini co-author: Armando Altieri, Mario D’Ettorre, Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
MiniLab 2.0: portable Electronic Mini Lab for Makers - electronic development for makers make easy
  F22 (pav. 8) - TecnoStudio Ars Innova - studio tecnico
 2019

Donato Abruzzese, Claudio Greco, Andrea Micheletti, Alessandro Tiero
An innovative system for real-time wireless monitoring of the stress state in structural elements of new and existing buildings
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Findazione ITS Servizi alle Imprese
Virtual assistant for the selection of wines and the creation of immersive tasting experiences

Smarted
MultiActivityBoard allows a learning through a multisensory approach, applying Tangible User Interfaces

Jasmin Velagic, Amir Nakic, Amila Sose, Dinko Osmankovic
The aim of this project was to develop the mobile robot management and navigation system using a mobile application.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Biomedical Lab srl
MyVenus is a new telemedicine system for patients receiving Home Mechanical Ventilation
  A10 (pav. 6) - Biomedical Lab srl
 2019

main author: Mariarosaria Emanuele, Alessandro Morello co-author: Mario D’Ettorre, Armando Altieri, Roberto Seghini, - the IoT team @ TecnoStudio Ars Innova
NBE_SmartPlug: a smart power limiter, your lights will never go out again
  F22 (pav. 8) - TecnoStudio Ars Innova - studio tecnico
 2019

3 A/C; 3 A/T; 3 D/M
The team has created small displays/monitors able to communicate the requested information clearly, quickly and adaptable to customer requirements
  D47 (pav. 5) - IO Salvatorelli-Moneta - Marsciano (PG)
 2019

ISS Pitagora - Classi miste - Nome del gruppo: Next Nao
Technological innovation, prototyping and implementation of a tool capable of dynamically encoding and decoding text / braille.

Polifactory
NEXT STEPS a collection of open source walking co-designed by designers, patients, and makers.

Niklas Sallali
NightmareV2 is a 3kg full metal spider robot made of 26 smart servos and lot of sensors including a 3d camera and a powerful computer for autonomous navigation.

RobotCare Team
IOT system for care olders, made up of interacting devices: kobuki, tablet, arduino, raspberry and kinect
  D18 (pav. 5) - ISIS Guido Tassinari - Pozzuoli (NA)
 2019

ITS 4.0 - Fondazione ITS Kennedy Pordenone
Artificial vision technologies applied to marketing 4.0. Tracking of shopping carts in hypermarket

NVIDIA
NVIDIA are world leaders in Artificial Intelligence and Computer Graphics. Our Jetson 'AI at the Edge processors' are a Linux ARM SoC platform much like Raspbe …

FabLab Algeri Marino
It is a glove that allows real-time monitoring of the rider's physical condition (heart rate and oxygen percentage in the blood)

Beatrice Di Sero
Open Innovation project on mobility and smart cities. A real open-air laboratory that aims to stimulate companies to co-design and co-develop services for citizens, making them visible and testable within the ELIS Campus.
  A31 (pav. 9) - Elis Digital University
 2019

OPEN-EYES srl
Don't let your video door phone homologate you! OPEN-EYES, if you need ... you can do

Officine Robotiche
OR-DOMO The didactics for Home Automation. Modular and scalable project to teach Domotics at every level.

Renato Reggiani
Greta Thunberg and climate change are two subjects that are too serious and important for the future of our planet to not even address them by Maker. Building an innovative educational garden with photosynthesis stimulators and sensors with BioPic school kitchen garden is for everybody.

Daniele GUI, Sabina MAGALINI, Pasquale MARI
The boundaries of cybersecurity in healthcare: how to provide hospitals with the best possible behavioural and governance tools?
  A15 (pav. 7) - Università Cattolica del Sacro Cuore
 2019

Carlo Sciuto, Pierluigi Buttiglieri, Giuseppe Patanè, Marco Sciuto
Park Smart, using the existing security cameras and its Artificial intelligence IoT, it’s able to monitor the availability of parking lots and helps the parking company to increase their revenue up to 30%.

Giovanni Mannara
This project is a pedal board and a maker style joystick, in fact it was printed with a plasma laser and folded with a hydraulic press, I used 3 potentiometers: accelerator, brake, steering wheel. All this controlled with arduino using the UnoJoy library which allowed me to simulate a Joystick, what this means, when I connect the arduino to the PC it is not read as arduino but Joystick.  It is possible to use it with any game, for the respect I made a video on Youtube only of the steering wheel here is the link (https://www.youtube.com/watch?v=nCQKoZ5gcmk&t=1s) is a DIY project but with this does not mean that the details have not been taken care of, I am attaching the photos below. Hope you like it !!

Pi Supply
Pi Supply have a collective experience of over 50 years in designing, developing and manufacturing electronic products. The company started in 2008 and has its …

Nico Capogna (CEO)
Pin Bike is the kit that turns your bike into a smart bike and rewards you for what you use it! Patented monitoring system (bicycle and car pooling) for mobility management.

PowerMeter
The energy you don't know to have

Paolo Bonelli
ProMicroLoRa is a home-brew board that allows a LoRa modulation radio connection on the free 868 MHz frequency. It is very economical, consumes little energy, goes very far, requires little software that can be managed with the Arduino IDE and interfaces with many different sensors.

Promocatanzaro - Azienda Speciale della Camera di Commercio di Catanzaro
Promocatanzaro - Special Agency of the Catanzaro Chamber of Commerce, with the aim of spreading the digital culture among local SMEs, promotes information and t …

Daniele Vigo
An infinite puzzle made with laser cutting to teach words to children through programming and colors.

Tatsuya Kaneko, Tetsuya Asai, and Hiroshi Momose (Hokkaido University)
A newly-developed reconfigurable AI accelerator for Arduino and the AI systems are exhibited. Everybody can touch and enjoy them.

Regione Lazio
Lazio Region at Maker Faire 2019 Lazio Region will be at Maker Faire again this year to show all the initiatives supporting makers, creatives and innovators …

Team ITT Giorgi
A remote controlled robot, useful for investigating disaster sites, analyze them in order to plan the rescue phase, retrieve images and estabilish an audio link with survivors
  A23 (pav. 9) - ITT Giorgi - Brindisi
 2019

CTU - Czech Technical University in Prague (Czech Republic), BUT - Brno University of Technology (Czech Republic), DFKI - German Research Center for Artificial Intelligence (Germany), ZeMA - Zentrum für Mechatronik und Automatisierungstechnik (Germany).
RICAIP is a Research and Innovation Centre on Advanced Industrial Production introducing completely new approach in industrial manufacturing virtually connecting testbeds through digital twins.
  C40 (pav. 9) - Czech Technical University in Prague, CIIRC CTU
 2019

3DiTALY e Formlabs
3DiTALY-Formlabs minifactory combines 3D printers and robots. A system that increases production speed and reduces errors.

classi 4A e 4C ISS GALILEI Mirandola
We built a mobile-robot for allow to sick students to follow lessons from their home. They can watch and feel lessons by remote position, but also talking with teachers and friends.

FDG Robotic Rehabilitation Group
A model of the implementation of Robotics in clinical practice coordinated by the FDG Center in Rome.
  B27 (pav. 9) - FONDAZIONE DON CARLO GNOCCHI ONLUS - IRCCS
 2019

ROME UNIVERSITY OF FINE ARTS SRL
RUFA, Rome University of Fine Arts, is a multidisciplinary, international educational centre – legally recognized by the Ministry of Education, University and …
  B23 (pav. 7) - ROME UNIVERSITY OF FINE ARTS SRL
 2019

Marco Simonetti
Living, made possible: the new technologies of life: a support of home autonomy

The Pervasive Electromagnetic Lab & Radio6ense: Gaetano Marrocco, Cecilia Occhiuzzi, Sara Amendola, Simone Nappi, Nicola D'Uva, Carolina Miozzi, Francesca Camera, Francesco Amato, Giulio Maria Bianco, Sara Parrella.
Second Skin: Epidermal Wireless Sensors
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Weedea
Secure Shelter is a system for structural health monitoring of buildings and infrastructures based on artificial intelligence and machine learning algorithms.

Anmic Siena
A prototype system aiming at overcoming barriers that persons with disabilities face everyday in urban contexts and shops.

Lorenzo De Luca, Michele D'Amico.
Self driving simulator: Curved screen, pedals, F1 steel and gaming seat, all managed by Arduino!
  E8 (pav. 6) - Lorenzo De Luca, Michele D'Amico.
 2019

Nicolò Leone, Giorgio Fontana, Zahra Bisadi, Fabio Acerbi, Lorenzo Pavesi
A compact fully-integrated photonic quantum random number generator, which is low cost, small, secure and CMOS compatible
  A16 (pav. 7) - Università di Trento
 2019

Mauro De Sanctis, Simone Di Domenico, Ernestina Cianca, Tommaso Rossi, Davide Fioravanti
We augment wireless communication networks with RF sensing capabilities to recognize actions of people from the analysis of RF signals
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

IoT Lab - DIISM - UNISI
Applications and prototypes from both the Internet of Things laboratory course of the University of Siena and the research group.

Cool Projects srl
Smart office management, resource and energy optimization.
  A11 (pav. 3) - Cool Projects srl
 2019

Gian Paolo QUARTA
TUBE-T3 is an IoT ATEX-sensor for pressure and temperature monitoring of a fluid or gas, with battery and LTE-CatM1/NB communication.

Studenti e laureanadi che operano nel Laboratorio di Oleodinamica e Pneumatica del Dipartimento di Ingegneria – Sezione Meccanica
Vehicle for experimental activities on the cooling systems of internal combustion engines. On board data acquisition (Implemented on open hardware Arduino UNO) of - the engine control unit - the operating parameters of the cooling system
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

STMicroelectronics S.r.l
Artificial Intelligence running on 32-bit Microcontrollers, thanks to a unique conversion and optimizing tool developed by ST.

STMicroelectronics S.r.l.
About STMicroelectronics ST is a global semiconductor leader delivering intelligent and energy-efficient products and solutions that power the electronics at …

4 AMA IPSIA G. CECONI UDINE
Sunflower high efficiency solar panels: It is a sunseeker system for photovoltaic panels. Our system has several advantages compared to normal sunseekers. First of all our system uses a single motor instead of two to guarantee the most favorable angle of incidence throughout the whole day for maximum efficiency of the solar panels; it can also allows to be mounted both a flat roof or on a pitch of the south-facing roof or again on a roof-type frame that allows you to create an underlying space for garage for example electric cars.

Team rosa: cinque ragazze ecofriendly
Robotics and IOT tailored to sustainable farming and acquaculture.
  A3 (pav. 9) - Liceo Scientifico "Luigi Siciliani" Catanzaro
 2019

Tecno s.r.l.
TECNO GROUP: 20 YEARS OF INNOVATION Tecno was founded in 1999 and operates in the energy and excise duties sectors. Since 2005 we have performed as an ESCo …

TEKO S.P.A.
TEKO Company was founded on 1957. Helping you gain a competitive advantage through innovative electronics enclosures. Teko delivers world-class enclosures to el …

Antonio D'Onofrio e Luca Cimaroli
Modulor is a kinetic architecture of 4 equal modules with mechanisms, levers and arms that open and close in sync
  E23 (pav. 8) - Fablab Architettura Sapienza
 2019

Virgilio Maretto, pOsti
The project “Roman Neighborhood Markets Traceability” aims to valorize the italian agri food production thanks to blockchain and other technologies.

Matteo Moneta - Cesare Giussani
A smart way to make your home smart, easily and without any kind of additional work required.
  E36 (pav. 8) - Module Electric
 2019

Unidata S.p.A.
Founded in 1985 and initially operating in the hardware field with the production of PCs and servers, in the 90s it began its pioneering commitment in the field …
  F20 (pav. 8) - Unidata S.p.A.
 2019

Bitjam, Francesco Fusco, Daniele Sabatini. Stefano Sabatini, Giulio Cespites
Viisible Light Communication: a tecnology thas has many application field in the real life: opening gate, send messages into the light, a car that talks to another car via headlight, safe internet in safe environments, another approach in robot communications. Our project will show you these applications pratically. We have developed prototypes that use the VLC in data communication in order to send auth tokens or multimedia messages. It's time that you know these capabilities to go beyond the immagination. Our startup Bitjam will help you in this.
  A18 (pav. 8) - Bitjam, F. Fusco, D. Sabatini. S. Sabatini, G. Cespites
 2019

A-Book
The haptics sensors allow the user to feel and percieve tactile feeback from VR world.

Antonio Pallotti, Emanuela Tagliente, Leandro Lucangeli
Sensory suits for human kinematics, sensory socks for posturology, electroencephalographic and electromyographic bands for occupational safety

Giovanni Tucci
Our project aims to discover the world of driving simulation
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Gruppo studenti 1° anno del corso ITS “Tecnico superiore verso l'Industry 4.0” della sede di Ancona della Fondazione ITS Recanati,
Small compactor that answers the question: "how do I solve the problem of the volume of plastic at home and in commercial establishments?"

Francesco Rodighiero (Designer), Sebastiano Ercoli (Designer), Daniela Meroni (Architetto), Enrico Bassi (Tutor), Rosa Garofalo (Esperta di tecnologie assistive per i subvedenti), Giovanni & Alice (Utenti)
Zoomografo is the careable dedicated to the visually impaired that allows you to enlarge words and images without losing the thread of the sentence.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019
 
Data updated on 2020-12-04 - 6.36.14 pm