Exhibitors 2019

Advanced technologies for innovative cast-based digital fabrication, and advanced computationally designed architectural structures

A fully-automated miniaturised photometric analyser for water monitoring featuring SLA 3D printed opto-fluidic components. Applications include environmental monitoring, hydroponic/aquaponic automation, industrial process control and much more.

Four masterpieces of Caravaggio, Raffaello and Correggio in tactile format for an experimental approach that bridges the gap between art and accessibility

A huge amount of agricultural plastic waste invades the planet. The plastics of petroleum origin assume particular importance from the environmental point of view, which often do not proceed towards a rational process of treatment, collection, disposal and / or recovery. An ecological alternative is represented by our bio-spray, an aqueous solution based on polysaccharides, which generates a protective geo-membrane covering the ground, which after performing its function, turns into biomass, water, methane or anhydride carbon.

Linear floor lamp with bulb shape. The LED stick can also be activated through the App for mobile devices.

Ancler®: simple and inexpensive real-time atmospheric monitoring. An ethical project to safeguard health and the environment, against pollution.

Portable burglar alarm with rechargeable batteries that produces an alarm sound when any door and window is opened in your room or apartment.

ART-HOUSE CANDLE: creation of handmade wax object, realized with antique method and new technological machineries

Sustainable art where waste is not seen as waste.

Solution for mobility is the ability to move independently in familiar and unknown environments with maximum safety and minimum effort.

BikerTop®: World’s First Pop-Up Shield Cover for Bikes. A groundbreaking system that protects cyclists from rain and wind. The cover pops open from the handlebar in just a few seconds, providing a shelter from the rain during journeys.

NANO© by BioPile is an automatic indoor growing device. It can grow many king of vegetables and plants by a patented technology and a research lever software. It also recycle water and filters Co2 constantly.

Biorefineries 4.0 to demonstrate practically how to turn agroindustrial wastes into value added products such as cosmetics and nutraceuticals. Bioeconomy starts by a circular approach in food sector.

Robotic arm, with six (6) degrees of freedom, made with a new type of 'back-lash free' articulation.

With this project we aim to create a new way of managing and designing buildings, exploiting the new 4.0 technologies such as augmented reality and IOT (internet of things).

the ns. project consists in using waste material and recycling it, we use fabric, shirts, sheets, curtains, pillowcases ect ...... reinventing other products for everyday use

The production activity consists in processing the hemp straws harvested from the agricultural supply chains to be transformed into the two constituent parts: the shives (wood internal part) and the technical fiber (short) that will be used for different industrial applications. Our goal is to relaunch the agricultural and industrial chain of hemp on the Italian territory and in particular in the south, thus creating a great opportunity for young farmers and entrepreneurs who, instead of having to leave the wonderful regions of Southern Italy in search of work, can achieve something concrete and innovative in their own land.

A prototype patented economical electrical trolley capable of climb steps and stairs also for transport persons

Our project is called “Carrellomatic”, it is an automated shopping cart that provides a substantial help to people who find difficult during the spending’s transport.

The multipurpose wheelchair is ready! Allows transfer from the wheelchair to the bed, to the car, to the toilet, etc.

Crawler wheelchair Groove Monster

Creation of a wearable chemical device, designed for sweat collection and chemical analysis for monitoring and diagnosing patients’ or sportsmen’ s health.

Compressions Houses are three different sculptures (3D printing, 2015) coming from the animation Time Bomb the Love (1997/98) which is a digital manipulation of rockets to the rhythm of techno music. Frame by frame, the missiles turn into very acid and synthetic-minimalist architectures I titled Compressions-Houses inspired by Newton Cenotaph. Through vertical-horizontal movements, the rockets disappear in straight lines and points, reappearing under the guise of defused bombs because transformed into architectures.

Cycled transforms the only thing that pollutes in a bicycle: The Tire!

Estrazione del lattosio da siero di latte per la produzione di bioplastiche 100% biodegradabili verso un' industria smart e sostenibile

Collaborative robotics for industrial production monitoring, diagnosis and quality control, integrating advanced noise and vibration analysis techniques.

The projects aim to promote robotic technologies for agile manufacturing and for inspection and maintenance among the European SME's

Belt drive system for pedal assisted cycles

All the space in a small space. Suitcase suitcase with vacuum compartment, GPS and digital scale

Do it simple.... with the sweatshirt you close with one hand.

Electronic Swim Trainer is an addressable strip led used by swimmers to train better.

Emotionwear is a fashion tech collection made with digital fabrication in a fablab featuring wearable devices expressing the wearer emotions.

System to impose rotations of attitude and orbit of small satellites (CubeSat) for their effective testing in a terrestrial Lab.

innovation, 3dprint, interactivity, interaction design, visual art, profume, arduino, raspberry, essential oil, fragrance, technology, hybrid, premiere, smartphone, image, color, percentage, multimedia, led, art

What future without plastic? What are the most promising research in this sense and which are possible? These are just some of the questions that will guide the Experiment it section proposed by Sapienza University of Rome with Saperi & Co at the Maker Faire in Rome.

Sapienza Università di Roma attends the Maker Faire 2019 - with the coordination of Saperi&Co. research and service infrastructure of the Sapienza University of Rome, whose aim is to promote outstanding applied research and to support innovation , with 18 related Departments, 4 lab on demand, a Fab Lab, a Workshop, a Coworking and a Training area, will open in October 2019. The theme chosen is "Experiment it - Do it - Play it", to talk about applied research topics with a high rate of innovation that Sapienza expresses in various fields and disciplines, from research up to the realization of real and true own products.

The FabTrolley is a suitcase addressed to a regular traveler, lover of nature and outdoor travel. It is also suitable for the professional who travels frequently, and who does not want to give up a soft bed to rest a few hours at the airport, waiting for the next flight.

The common rear lights for cars use areas defined for the various visualizations, in this project with the use of multicolor lighting elements the various areas of a rear light can take any color, optimizing its use.

EXHIBIT SMALL AND MONUMENTAL WORKS OF ART THROUGH INNOVATIVE AS3D VISUAL SUPPORTS * IN ORDER TO APPROACH AND DISCOVER THE HISTORICAL ARTISTIC HERITAGE FROM OUR DAYS TO THE PUBLIC, IN PARTICULAR THE ITALIAN HERITAGE, ORGANIZING ITINERARY TOPICS OF INTERNATIONAL BREATH AND IMPACT VISUAL AND EMOTIONAL

Small electric competition vehicle, suitable for children and teenagers

Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems

HoloView allows to view 3D Models and interact with them through an innovative Holographic Display

HURBA is the first true electric scooter in Italy with a removable battery. HURBA has also patented an innovative battery that recharges in 12 minutes and lasts 120 years.

iFew (interactive Future Effectiveness Water): smart bottle that exchanges cloud data with iFewApp, provide mineral blends customized to individual needs

Co-design for healthcare method: a way to support healthcare professional to innovate using technologies (even if they don't know how)

Open Source Parks in Rome: bottom up maintenance, “Open” digital projects, produced in Fab Labs, and installed for free interaction.

Industruino is bridging the world of makers and industrial automation.

Industrial electronic regeneration: The Circular Economy makes possible to reduce the time and costs of plant downtime.

The project was created with the aim of modifying the production process of peeling almonds through the use of innovative technologies.

Low-cost personalised custom-made foot orthotics using IoT and 3D printing