Exhibitors 2019


Result for TAG "Open Source"



Tiziana De Filippis, Leandro Rocchi, Patrizio Vignaroli, Elena Rapisardi, Bruno Guerzoni
Climate Services Open Source for developing countries. Climate services are important to foster adaptation to climate risks and in reducing vulnerability in developing world contexts. 4Crop web application gives the possibility to evaluate impacts due to drought stress during the whole crop growing cycle in Sahelian areas. SLAPIS (Système Local d’Alerte Précoce pour les Inondations de la Sirba) enhances the capacity of Niger Institutions to forecast, alert for and manage floods.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Ramona Magno, Tiziana De Filippis, Edmondo Di Giuseppe, Elena Rapisardi, Leandro Rocchi
Drought dynamics reveal a time gap between the onset of a drought event and the management of the drought emergency, but often this gap is too wide to effectively reduce the impacts. The Drought Observatory (https://drought.climateservices.it/en/) developed by CNR-IBIMET could fill this gap. It is an operational system providing Open, detailed and timely information and technical support to decision-makers, water authorities, researchers and stakeholders to enhance mitigation and adaptation plans. In particular, the coupled rainfall-based and satellite-derived monitoring system both provides multiple time scale occurrence and duration of drought, and allows the assessment of vegetation conditions at different spatio-temporal scales.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Piero Toscano, Leandro Rocchi, Riccardo Dainelli, Alessandro Matese, S. Filippo Di Gennaro
AgroSat combines digital technologies (IoT and Big Data) and scientific research products to create a collaboration platform that allows end-users to access, share, consult data – info – knowledge and plan actions. AgroSat is a full free open source platform and works from any web-browser and devices.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Robotics for Rehabilitation team
PLANarm2 is an end-effector-based parallel robot for neurorehabilitation. It allows the patient to practice planar movements of his hand, exploiting both elbow and shoulder movements. The movement of the manipulandum held by the patient is controlled by two motors. The device is equipped with two load cells to measure the force exchanged with the patient. Force-based and adaptive control algorithms enable the device to help the patient in performing rehabilitation tasks according to his capabilities and his level of impairment. A graphic environment proposes interactive and engaging tasks. The device has been designed to be clamped on one side of a table, also in a domestic environment. The modularity of the ROS-based control system will enable a straightforward integration of additional devices
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Medaarch s.r.l. s.t.p
CAD is a center of excellence for training and consultancy on innovation issues, the only place in Italy dedicated to re-launching craft activities

Andrea Chesi IIS Tito Sarrocchi Siena
The goal of the "leap - done" project is to pilot a complex system, such as a drone, using hand movement instead of a normal radio command. The sensor used to achieve this goal is a "leap motion" camera.

Giuseppe Massaria, Antonio Idà
ALAN-2 is a tracked Robot for military use. It has GPS, supports automatic learning, autonomous navigation and the NAV function with which it is possible to give a mission. The ROS system combined with a Neural Network provide access to the A.I. It is equipped with a Smart Charging Station (custom).

British Interplanetary Society
Set of practical activities designed to introduce about Apollo lunar missions in an funny and engaging way.

Una Quantum Inc
Bring digital fabrication technologies into the management of artistic and cultural heritage

Unione Astrofili Italiani
Crafting, passion and astronomy knowledge applied to astronomy popularization and inclusion, because everyone has the right to “see the stars”

Unione Astrofili Italiani
This Project presents the design and construction guidelines for a small personal remote observatory
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

ISARLAb
The project will demonstrate robotic vision applied to driverless robots and cars, and to robots for precision farming.
  C7 (pav. 9) - Engineering Department - University of Perugia
 2019

Michele Turco
Alberto Marzaioli" Balance Bike - A wooden bike for children aged 2 to 6, which allows them to develop balance and fine motor skills. The project has no commercial purposes and has been developed for scientific / educational purposes ( Duryng the Fab Academy 2019 cycle ). The project can be downloaded for Free and replicated in any other part of the World ( FabCloud archive ).
  E21 (pav. 8) - Kromlabòro - Caserta FabLab
 2019

Valerio Nappi
An Arduino based true random number generator fueled by bananas.
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

The BeeBlockers - IV B e V B - ITET “Rapisardi Da Vinci” - Caltanissetta
Interchangeable teaching modules for the realization of electronic devices programmable in visual language to learn the "Coding" at school, while having fun.
  D25 (pav. 5) - ITET Rapisardi Da Vinci - Caltanissetta (CL)
 2019

Corso di Elettronica-Automazione I.I.S. “Rita Levi-Montalcini” Acqui Terme (AL)
Open source and low cost devices for blind people: Voice synthesizer connectable to everyday use equipment.
  D4 (pav. 5) - IIS Rita Levi-Montalcini - Acqui Terme (AL)
 2019

Blue_Boost Project - ADRION Programme
Blue_Boost project - ADRION Programme – brings together 7 partners from Italy (University of Camerino – Marche; Central Europe Initiative - Friuli Venezia G …

Team DigiLAB Volta - Triennio Superiore Istituto Tecnologico
Robotic Arm V.I.A.
  A1 (pav. 5) - IIS Alessandro Volta - Frosinone (FR)
 2019

Brunetti Fabio, Calandrin Marco, Nardin Andrea, Virzi Gabriele, Pasqualotto Giulio
With this project we aim to create a new way of managing and designing buildings, exploiting the new 4.0 technologies such as augmented reality and IOT (internet of things).

AGILEWARE
Make your own vintage analog counter with a social aspect!

Conrad Electronic Shop
GIVE LIFE TO YOUR IDEAS Every invention begins with an idea, with a precise image that buzzes in your head, insists and wants to be realized. This is what give …

Associazione Promozione Sociale SalvaiCiclistiRoma
A low cost device to monitor biker, pedestrian and runner traffic along a cycle path. A tool helping citizens to call pubblic officers and politicians attention to their needs.
  E9 (pav. 3) - Gatti della www.ReginaCiclarum.it
 2019

Timothy Frégeau, Elena Panciroli, Oriane Anita Rainero, Giorgio Ratti, Natali Ristovska
A musical instrument that allows children with motor disabilities to learn, produce music and play alongside other people.
  A3 (pav. 6) - T. Frégeau, E. Panciroli, O. A. Rainero, G. Ratti, N. Ristovska
 2019

Digi-Key Electronics
Digi-Key è una società americana, di proprietà privata, con 3500 dipendenti in tutto il mondo e un fatturato totale di 2,3 miliardi $ all'anno. Da un unico p …

Marco Baruzzo, Carlo Fonda, Sara Sossi, Gaya Fior, Erika Ronchin, Enrique Canessa
This DIY "Cloud Chamber" makes visible to the naked eyes a number of tracks of elementary particles like electrons, protons and muons.
  B13 (pav. 3) - ICTP SciFabLab - Trieste
 2019

Doc Creativity Soc. Coop.
Doc Creativity is the cooperative in Doc network which addresses all freelances of creative sectors, always seizing the processes of evolution and ibridation th …
  B29 (pav. 8) - Doc Creativity Soc. Coop.
 2019

Duckietown Foundation
The state-of-the-art robotics and AI education and research platform designed to enable the makers of the next generations of autonomy.

Joan nadal
E3bot is an Educational, Ecological and Evolutive robot to learn robotics and ecology in a fun way.

4°-5° Esc, Liceo Monti Chieri (TO)
"Eagle & Beagle" is formed of two robots which interact: a drone (Eagle) and a rover (Beagle).
  A3 (pav. 5) - Liceo Scientifico Augusto Monti - Chieri (TO)
 2019

Gymnasium Vukovar, Junior class (17 and 18 years of age), second team
Our seismograph will be able to track and send all the data in real time from the accelerometer to the microcontroller Genuine Arduino MKR 1000 wifi. The collected data readings are sent to the Internet through always active Blynk server ( http://blynk2.croatianmakers.hr ), of the Institute for Youth Development and Innovativity (IRIM).
  D14 (pav. 5) - Gymnasium Vukovar - Vukovar (Croatia)
 2019

Luca Brighenti
Electronic Swim Trainer is an addressable strip led used by swimmers to train better.
  H26 (pav. 6) - Luca Brighenti
 2019

EMC Elettronica Srl
Elettronica Open Source is a blog born in 2006 with the aim of spreading quality articles and allowing the exchange of ideas and experiences between electronics …

Team EmotionWear: Sara Savian, Alessadra Trestini, Mauro Alfieri
Emotionwear is a fashion tech collection made with digital fabrication in a fablab featuring wearable devices expressing the wearer emotions.
  H4 (pav. 6) - Team EmotionWear: Sara Savian, Alessadra Trestini, Mauro Alfieri
 2019

Martin Romeo
innovation, 3dprint, interactivity, interaction design, visual art, profume, arduino, raspberry, essential oil, fragrance, technology, hybrid, premiere, smartphone, image, color, percentage, multimedia, led, art

Giovanni di Dio Bruno
Erwhi Hedgehog is the smallest advanced open source robot that works on SLAM and Machine Learning.
  A24 (pav. 9) - Officine Robotiche
 2019

Alessandro Cammerata, Roberto Mortaro, Luigi Benedetti, Simone Figorilli, Paolo Menesatti
A solar-powered “pasta dryer” managed the IoT technology.

Fabrizio Di Vittorio
VGA Controller, PS/2 Mouse and Keyboard Controller, Graphics Library, Game Engine and ANSI/VT Terminal for the ESP32
  E27 (pav. 8) - Fabrizio Di Vittorio
 2019

Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
Gemini is a smart DC motors controller for application that requires constant speed.
  E9 (pav. 8) - Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
 2019

Amy Beaulisch
The Giant Breadboard is meant to acquire knowledge and understanding about basic electronic principles and facts and to train skills in breadboard prototyping in a playful way.

Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems

Francesco Rodighiero (Tutor), Ludovico Russo (Sviluppo Software ed Elettronica), Alessio Crivelli (progettazione 3D e Hardware), Teo Bistoni (Supporto programmazione), Daniela Meroni (Organizzazione, supporto sviluppo e collaudo), Rossella Indaco (Support
A tactile map of Italy presents buttons for each region. When the buttons are pressed, audio tracks are reproduced that describe various aspects of the region.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019

Hoist Finance
Hoist Finance is a trusted debt restructuring partner to international banks and financial institutions. We are specialised in serving banks in handling non-per …

Dipartimento di Architettura, Università Roma Tre; Coordinamento Prof. Stefano Converso, con V. De Ferraro, Studenti del corso di Tecniche Parametriche di Progettazione
Open Source Parks in Rome: bottom up maintenance, “Open” digital projects, produced in Fab Labs, and installed for free interaction.

Matteo Bianchi, Manolo Garabini, Lucia Pallottino, Vincenzo Ferrari, Carmelo De Maria, Alessandro Tognetti
Solutions for assistive and medical applications, autonomous, mobile and industrial robotics, and advanced human-machine interaction
  C13 (pav. 9) - Centro di Ricerca "Enrico Piaggio" - Università di Pisa
 2019

JLCPCB
Shenzhen JLC Electronics Co., Ltd., established in 2006. JLCPCB is a top domestic manufacturer for PCB prototyping. With a production capability of over 200,0 …

Giovanni Mannara
This project is a home automation in miniature ... It is not a normal home automation but it is an innovative house that points to the future because it is also environmentally sustainable.

Millepiani - Anna Grossi Giardiniera Paesaggista - L'Altro Abitare Architettura Sostenibile - Wildnest Bioarchitettura e Feng Shui
Millepiani Coworking created -Healthy Home- an -open zone- to explore new tools, movements and mindsets to make cities and technologies for people. Our proposal brings together the bio-architecture and living wellness skills which are dedicated to sustainable design, using innovative materials, technologies for energy saving and the creation of living environments that promote physical and psychological wellness.

Dipartimento di Informatica, Università di Verona
Innovation research and teaching in the new ICE Lab at University of Verona.

Alberto Bigazzi e gli studenti del Plinio.
Educational project aimed at demonstrating the capabilities of an electromagnetic launcher for sending Moon-produced materials to Space

Mariglen Ymeraj, Filippo Guerra, Davide Cassanelli, Giovanni Gibertoni, Giuseppe Antonello Gentile
Laser Engraver is a small CNC machine for engraving images on several materials like wood, plastic, leather and many others.
  F15 (pav. 8) - M. Ymeraj, F. Guerra, D. Cassanelli, G. Gibertoni, G. A. Gentile
 2019

main author: Mario D’Ettorre, Armando Altieri, Roberto Seghini co-author: Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
Led Hockey Game based on multigame Led Interactive Platform v. 2.0
  F22 (pav. 8) - TecnoStudio Ars Innova - studio tecnico
 2019

Lumi Industries - Davide Marin
The first incredibly low cost DIY Open Source visible light resin 3D printer for smartphone. A maker must have!
  F36 (pav. 8) - Lumi Industries - Davide Marin
 2019

Fanny Ficuciello, Rocco Moccia, huan Liu, Pasquale Ferrentino
PRISMA Hand II is a mechanically robust anthropomorphic robot hand. Portable dVRK is a simulator of da Vinci robot.
  B15 (pav. 9) - Prisma Lab & ICAROS Center, University of Naples Federico II
 2019

Gruppo Mindgames della classe 4^Arob ITIS Delpozzo, Cuneo
We thought of a new way to play videogames: we think every player should be able to play just using his mind!

Globalmap
We produced physical representations of the digital terrain model of a very specific area of Mars

Jasmin Velagic, Amir Nakic, Amila Sose, Dinko Osmankovic
The aim of this project was to develop the mobile robot management and navigation system using a mobile application.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Enzo Cimino / FabLabRoma/InnovationGym
MusicFabLab, an initiative born in the FabLab of the Fondazione Mondo Digitale to bring the world of music closer to that of making. At Maker Faire an interactive installation, composed of plants and Arduino sensors, will reproduce sounds and give life to a collective performance.
  D5 (pav. 7) - Fondazione Mondo Digitale
 2019

4°Bt, 4E e 4°I ISIS "FERRARIS - BUCCINI" di Marcianise
The muscular signal is taken and conditioned. A microcontroller is used to control a servomotor that causes the fingers of the prosthesis to close.
  A15 (pav. 5) - ISIS Ferraris Buccini - Marcianise (CE)
 2019

Virgilio Claudio Campobasso
Naima (Natural Interface Mastermind) is a "gestual" implementation of the old 1970s codebreaker, Mastermind.
  B15 (pav. 6) - Virgilio Claudio Campobasso
 2019

main author: Mariarosaria Emanuele, Alessandro Morello co-author: Mario D’Ettorre, Armando Altieri, Roberto Seghini, - the IoT team @ TecnoStudio Ars Innova
NBE_SmartPlug: a smart power limiter, your lights will never go out again
  F22 (pav. 8) - TecnoStudio Ars Innova - studio tecnico
 2019

Polifactory
NEXT STEPS a collection of open source walking co-designed by designers, patients, and makers.

NVIDIA
NVIDIA are world leaders in Artificial Intelligence and Computer Graphics. Our Jetson 'AI at the Edge processors' are a Linux ARM SoC platform much like Raspbe …

FabLab Algeri Marino
It is a glove that allows real-time monitoring of the rider's physical condition (heart rate and oxygen percentage in the blood)

Singular Devices Maker Studio
Open LED Race an minimalist cars race with a strip of LEDs
  E3 (pav. 6) - Singular Devices Maker Studio
 2019

Reason out Factory
OPEN LITIO is a battery case that allows you to have a battery without welding, easily regenerable and completely recyclable.

Emanuele Cesena
Solo, the first open source FIDO2 security keys, for two-factor authentication and passwordless login
  F18 (pav. 8) - SoloKeys
 2019

Martin Peterlin, Erik Kokalj
Thermal camera for Android devices, based on the MLX90640 sensor to provide an opensource, hackable, customizable, mobile thermal imager.
  C4 (pav. 7) - Martin Peterlin
 2019

OPEN-EYES srl
Don't let your video door phone homologate you! OPEN-EYES, if you need ... you can do

Valerio Campari e Andrea Marenghi
The hardware for the 4.0 revolution. This system allows makers to bring their projects, constructions, to a professional level.
  F45 (pav. 8) - Valerio Campari e Andrea Marenghi
 2019

A.p.s. Mindshub
A robot that cultivates a small vegetable garden in autonomy. With an application you can decide what to cultivate...he takes care of the rest! A notification will notify you when the crops are ready.

Silvio Scena
Modular Musical Instrument. Each module (1 octave, 12 dynamic keys ) can be used individually in stand-alone mode or assembled with others composing a full piano keyboard. The same object can be used for studio writing or recording, then musicians can use 1 or 2 octaves, or for live performances, then they can use 7/8 octaves. The modularity of the tool reduces its size, and thus favors the transportability.

Parconier
Parconier is a Uruguayan startup, founded by Pablo, Fernando (both designers) and Gonzalo (engineer in electronics), which was formally born in 2018. It deve …

Giovanni Mannara
This project is a pedal board and a maker style joystick, in fact it was printed with a plasma laser and folded with a hydraulic press, I used 3 potentiometers: accelerator, brake, steering wheel. All this controlled with arduino using the UnoJoy library which allowed me to simulate a Joystick, what this means, when I connect the arduino to the PC it is not read as arduino but Joystick.  It is possible to use it with any game, for the respect I made a video on Youtube only of the steering wheel here is the link (https://www.youtube.com/watch?v=nCQKoZ5gcmk&t=1s) is a DIY project but with this does not mean that the details have not been taken care of, I am attaching the photos below. Hope you like it !!

Per R.Ø. Salkowitsch
A loving robot in every home.

Pi Supply
Pi Supply have a collective experience of over 50 years in designing, developing and manufacturing electronic products. The company started in 2008 and has its …

Livia Giacomini, Giulia Mantovani, Emanuele Scalise et al. (Speak Science in collaborazione con INAF-IAPS, Università Roma Tre)
Planets in a room is a DIY low-cost kit to build a small, spherical planet and stars simulator

Schiarizza Davide, Repoli Salvatore
Pick & Place machine for small and medium SMD productions
  B3 (pav. 8) - HT Tecnology
 2019

I Malosios
Print your own murble run!

Luigi Palmiero, Roberta Guerini, Giuseppe Modaffari
PlanPact allows the calculation of individual merit during group work to increase motivation, quality of work and results
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Poligrafico e Zecca dello Stato Italiano
Cutting edge anti-counterfeiting and traceability systems to guarantee physical and digital identity, sophisticated technological applications and integrated so …
  E11 (pav. 8) - Poligrafico e Zecca dello Stato Italiano
 2019

Francesco Burlando, Xavier Ferrari Tumay, Annapaola Vacanti
POS3D is an interactive laboratory based on the opensource robot Poppy. Visitors will be able to design Poppy's appearance by interacting with a parametric model and composing the various 3D printed elements.
  D15 (pav. 7) - Università degli studi di Genova
 2019

Promocatanzaro - Azienda Speciale della Camera di Commercio di Catanzaro
Promocatanzaro - Special Agency of the Catanzaro Chamber of Commerce, with the aim of spreading the digital culture among local SMEs, promotes information and t …

2nd Junior High School of Chania / SchoolSpace Team
A recreation of an 80s era home computer, designed and built from scratch using a Z80 CPU and assembly programming!
  A22 (pav. 5) - 2nd Junior High School of Chania - Chania (Greece)
 2019

Regione Lazio
Lazio Region at Maker Faire 2019 Lazio Region will be at Maker Faire again this year to show all the initiatives supporting makers, creatives and innovators …

Reason out Factory
Retro e Tool is a retrofit prototipe usefull to convert agricultural motorized tools intoo electric ones: easy to build and fully functional.

Reware
Prevent E-waste now! Reware, the specialized social business that prevents E-waste through the refurbishment of huge amounts of IT assets.

Fondazione Mondo Digitale
Road to RomeCup2020 enhances the work of young people who develop original prototypes for international competitions and challenges launched by universities

Sergio Subrizi & Acme System
Rotala is a full featured woodworking router table, with electronic position control, Digital Read Out touch screen panel. The touch screen panel is a project by Acme Systems called "CM3 Panel", based on the CM3 Raspberry Pi board. The control panel "Rotala Panel" is an Open Source project that can be adapted to any personal project needing a DRO and position control.
  F14 (pav. 8) - Sergio Subrizi & Acme System
 2019

Miriam Ronchi, Francesca Raimondi, Mattia Ventrella e Ülker Aral
Row-Ro is a custom made brace with an adjustable closure system designed for Rosina, a girl who has an incomplete tetraplegia, who wants to continue the practice of rowing.
  A27 (pav. 6) - Miriam Ronchi, Francesca Raimondi, Mattia Ventrella e Ülker Aral
 2019

Matteo Berrettoni
A flashlight-pumped solid state ruby laser
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

Liberini Giorgio
This project aims to help photographers sell photos during events and sporting events or competition.
  H21 (pav. 6) - Liberini Giorgio
 2019

AGILEWARE
It doesn't matter if you feel being a Jedi or a Sith: you need a SaberLED to enter the battle!
  E6 (pav. 6) - AgileWare
 2019

WASP
Food, house, health, energy, work, art and culture. Shamballa answers at basic human needs through digital fabrication.

Alessio Morale & Officine Robotiche
A powerful autonomous rover robot based on open source technologies developed as a learning platform.
  A24 (pav. 9) - Officine Robotiche
 2019

Cool Projects srl
Smart office management, resource and energy optimization.
  A11 (pav. 3) - Cool Projects srl
 2019

Matteo Cristini, Alberto Nidasio
We built a drone fleet with recycled material, to be able to monitor how climate changes affects water environments.
  B3 (pav. 9) - Matteo Cristini, Alberto Nidasio
 2019

Francesca Bollito, Andrea Castelli, Federica Padovano, Eleonora Ferrero, Victoria Lopez, Ettore Fassino (Tutor), Gaia Marchetti (Tutor)
Squeezer 46 is a device for wringing out sponges and rags for people who don't have the full mobility of their hands.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019

STMicroelectronics S.r.l.
About STMicroelectronics ST is a global semiconductor leader delivering intelligent and energy-efficient products and solutions that power the electronics at …

TEKO S.P.A.
TEKO Company was founded on 1957. Helping you gain a competitive advantage through innovative electronics enclosures. Teko delivers world-class enclosures to el …

Michele Conati
The Telescopic Yagi consists of an innovative, telescopic, modular, transportable and economical antenna.
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

vEyes (virtual Eyes) - ONLUS
The objective of “Tourist Eyes” is to provide blind tourists a system for to move between the points of interest, visiting unknown places.
  A14 (pav. 6) - vEyes (virtual Eyes) - ONLUS
 2019

Francesco Rodighiero (Tutor), Daniela Meroni (Co-design & Testing), Anisia Lauditi (Making), Alberto Ghirardello (Design), Rossella Indaco (Making)
The first folding table for wheelchairs. All 3D printed.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019

Ultimate Robotics
Open source wearable ECG measurement device. It measures ECG and stress, collects raw data and sends it to a mobile device or computer.
  B2 (pav. 6) - Ultimate Robotics
 2019

YOTA Italia - Marco Sartini (IU2DPM), Francesco De Giudici (IU3GNB), Luca Bennati (IU2FRL), Luca Mascanzoni (IU3BXI)
Emergency satellite radio communication system, based on the QO-100 amateur radio transponder. Practical and operational in a few moments, made with open source software.

British Interplanetary Society
Educational model of the avionics systems of the Vega launcher to learn how to assemble complex systems and how a launcher works.
  E25 (pav. 7) - British Interplanetary Society
 2019

Giacomo Tombolan
Spring reverbs are cool especially when you can put your fingers on them
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

Bitjam, Francesco Fusco, Daniele Sabatini. Stefano Sabatini, Giulio Cespites
Viisible Light Communication: a tecnology thas has many application field in the real life: opening gate, send messages into the light, a car that talks to another car via headlight, safe internet in safe environments, another approach in robot communications. Our project will show you these applications pratically. We have developed prototypes that use the VLC in data communication in order to send auth tokens or multimedia messages. It's time that you know these capabilities to go beyond the immagination. Our startup Bitjam will help you in this.
  A18 (pav. 8) - Bitjam, F. Fusco, D. Sabatini. S. Sabatini, G. Cespites
 2019

HackLab Terni
We have built an Ardupilot quadricopter with Raspberry Pi3 and Camera capable of autonomous indoor flying using vision position estimation.
  B3 (pav. 5) - HackLab Terni
 2019

Fabio Defabis (Autore del progetto) Giovanni Pirozzi (Logistica e distribuzione)
The Z80-MBC2 is a modern reworking of the classic microcomputer with Zilog Z80 processor, made with only 5 integrated circuits.
  B2 (pav. 8) - Z80-MBC2 un computer Z80 fatto in casa
 2019
 
Data updated on 2020-12-13 - 11.41.04 pm