Exhibitors 2018


Result for TAG "New Manufacturing"



FOSAN - FONDAZIONE STUDIO DEGLI ALIMENTI E DELLA NUTRIZIONE UMANA
"SUPERNUT" proposes economic and green technologies for the use of the antioxidants of hazelnut skin for food and cosmetic products
  E31 (pav. 4) - FOSAN - FONDAZIONE STUDIO DEGLI ALIMENTI E DELLA NUTRIZIONE UMANA
 2018

Steampunk 99
Clothing and accessories steampunk and not, handmade and with the help of 3D printing, hot-wire cutting with numerical control, laser cutter, CNC milling cutter and other traditional and digital equipment.

Monica Bulgarelli, Walter Falzoni, Gianluca Angelini
EasyEM clothing makes life easier for children with motors discomforts in the upper limbs (chronic/neurological disabilities, fractures, sprains, amputations, prosthesis).
  B32 (pav. 4) - Monica Bulgarelli, Walter Falzoni, Gianluca Angelini
 2018

Fab Lab class with Mr Zoffoli, Marymount International School Rome
An advanced and autonomous drone with an anti-collision system and a surveillance system. It uses two optical cameras, a radiometric thermal camera and a 3D camera to carry out a variety of missions, especially defense ones.

FITH S.r.l.s.
The "Aviation Elevator" is the new project for assistance in railways for maintenace and repair for little planes and helicopters

Sintegy S.r.l.
Booktilla®: the innovative bottle. Flat, Antibacterial and a Book with a Message.

Giovanni Saggio, Giovanni Tucci, Carlo Alberto Pinto
The alliance of three partners for evaluating the energy expenditure, the mechanical efforts on the body articulations and their crucial range of motions to determine the optimal body arrangement for assessing the lower body fatigue for the best driving performance
  A1 (pav. 5) - Università degli Studi di Roma "Tor Vergata"
 2018

DDR Ing. Fabrizio Granieri
The multipurpose wheelchair allows the transfer from the wheelchair to any support such as the bed, the car, the toilet...

Marcoccia Fabrizio, Zambelli Ilenia, Calicchia Luca
This "Universal Solar Battery Charger is able to travel all electric vehicles... 1000 km with 1 cent. It does not emit CO2 and owns an antitheft algorithm

The TanzoLab Project
CM3-Panel is a thin panel PC based on Raspberry Pi 3 compute module thought to be integrated on the front panel of your next project

Angelo Di Chello, Mattia Monetti
A compact and affordable CNC. An open project for makers who want to make their circuits free from chemical processing.
  E21 (pav. 8) - Angelo Di Chello, Mattia Monetti
 2018

Andrea Reverberi, Bruno Fabiano, Alessandro Bruzzone
Process for the cool synthesis of nanoparticles by mixing two aerosol phases
  G4 (pav. 5) - UNIVERSITA' DEGLI STUDI DI GENOVA
 2018

Tecnici superiori dell'ITS TAM di Biella
New perspectives in clothing with fabrics based on agri-food fibers and wool; the excellence of the territory combined with research for the textiles of the future.

Silvio Potente Luca Potente
Cycled transforms the only thing that pollutes in a bike: the tyre. Each one gains a new life through handcrafting. They are transformed into a useful, indestructible and unique object.

Loredana Di Lucchio, Sabrina Lucibello, Lorenzo Imbesi, Andrea Vitaletti
Design to Make is an interactive area focused on the creation of new materials, and urban usability IoT design services.

Il progetto Design, design ovunque! è a cura di ADI, ADI Lazio in collaborazione con CONI. Ci sono progetti selezionati da ADI Lazio: • AMARCORD, lampada, Martinelli Luce. Design: Adolini+Simonini, http://www.martinelliluce.it/prodotti/product/563/1496
Design, design everywhere! In this section you will find products and services for the home, sport and everyday life that until recently we would never have imagined to be able to use today. Many of these have been recognized by ADI, including those which have won the prestigious Compasso d'Oro Sports Award sponsored by CONI, all of which are the result of that particular culture that is exclusive to good design and which combines aesthetics and functionality. Discover together with ADI the future that is already here with us.

Diego Marinelli
We give a second life to the materials that surround us
  C4 (pav. 6) - Diego Marinelli
 2018

ITS MECCATRONICO VENETO, SEDE DI VICENZA, ITS 2016-2018 GRUPPO 5
The Automatic Medical Dispenser consists of a kart where there is a mechatronic system installed. The goal of this project is to help nurses on the dispensing phase.
  B11 (pav. 9) - ITS Academy Meccatronico Veneto - sede di Vicenza
 2018

Veronica Sberveglieri, Giorgio Sberveglieri, Elisabetta Comini, Estefania Núñez Carmona, Marco Abbatangelo
Smart Olfactive Nanotechnological Sensors Tools (S3) for Life Science Applications

IIS “G. Vallauri” – Fossano (CN) - Peirone Matteo e Russo Alessandro
Draw Bot is a plotter built with recycled materials, it acquires and prints on post-it in less than a minute.
  B19 (pav. 9) - IIS G. Vallauri - Fossano (CU)
 2018

Alessandro Capati, Angelo Rosati
Easy Stand is a standing desk cheap, portable, customizable, to work properly on personal computer sitting and standing.
  D10 (pav. 4) - PimpMyDesk
 2018

CRISALIDE DESIGN SPACE
Egg-o is a multi-functional object designed to improve the lives of refugee children. Its distinctive shape makes it convenient to carry and easily assemble anywhere. Egg-o is based on the idea of a simple object to serve multiple functions, that follows the growth of the child.First a swinging cradle, then a baby back carriers and finally a rocking chair to play. While the elastic fabricof Egg-o provides comfort and support to the baby, the interlocking mechanism allows for a quick and easy assembly. Egg-o is also a social project that gives the refugees a chance to contribute their community and foster their integration. Providing employment to the refugees through the production of Egg-o help to improve their self-sufficiency and their will of independence.

FITH S.r.l.s.
The "ElectricSave" is a new rescue boat designed for lifeguards, completely electric, faster, more efficient and safer.

Susanna Martucci
From the repurposing of graphite powder, byproduct of the tech industry, innovative products from Italy for a more sustainable future.

C.Colella: Electronic Engineering;
S.Di Benedetto: Software Engineering; A.Grillo: Design
Engrave Cube (E³) is the portable and stand-alone device designed by "Fablab Napoli" to make laser engraving simple and safe.

PIERLUIGI DI GIOVANNI, MARCO MARTINELLI
The open 3D co-design and digital fabrication platform you were looking for.

Arpaia Pasquale, Francesco Bonavolontà, Francesco Serino, Ferdinando Chianese, Luca Porzio, Rosario Schiano Lo Moriello, Edoardo Campoluongo, Annalisa Liccardo
AIRPOD, Unina Corse, AR

Franco Giacometti e Fulvio Fusella
FLOW easy thermoforming presents FLOW A3desk the compact and professional vacuum forming for everyone.

FONDAZIONE ITS JOBS ACADEMY
The new life of plastic: from waste to resource with 3D printing and anthropomorphic robotics.
  D21 (pav. 9) - Fondazione Its Jobs Academy
 2018

Corso ITS Tecnico Superiore per l'Automazione ed i Sistemi Meccatronici AF 2017-2018 - Torino
Innovation of the GAV (Buoyancy control device jackets for diving) improving the safety (new recyclable materials, new production technology, new electronic security systems). The current trim stabilizer has been replaced with a system for filling and emptying water of a stiff container like the submarine's watertight chambers
  C3 (pav. 9) - Unioncamere-ITS Automazione e Sistemi Meccatronici
 2018

Giovanni Saggio, Mariachiara Ricci, Vito Errico, Antonio Pallotti, Franco Giannini, Carla Cenci, Mauro D'Ambrosi, Marco D'Ambrosi, Donato D'Ambrosi, Sveva Viesti, Alessandro Pauciulo
A Smart Glove for Remotely Controlling an Anthropomorphic Hand

Lorenzo Panisi, Silvia Giovanella, Claudio Ferrari
Hyperion, a new way to live the energy of the sun.
  F25 (pav. 6) - Lorenzo Panisi, Silvia Giovanella, Claudio Ferrari
 2018

Loic De Buck
Automation controllers that bridge the worlds of makers and real industry.

Donato Abruzzese, Claudio Greco, Gaetano Marrocco, Andrea Micheletti, Alessandro Tiero
An innovative system for real-time wireless monitoring of the stress state in structural elements of new and existing buildings
  A1 (pav. 5) - Università degli Studi di Roma "Tor Vergata"
 2018

Italia Cosplay
handmade creations of cosplay, armors, robot, statues, scenographies and accessories.

PATRIZIO DI MARCO / iScooter
Wheelchair is designed with brushless and directional engines for wheel drive. Through the two levers placed under the armrests it is possible to increase, decrease the speed and decide direction/direction of travel. Manageable, practical, fun and ecological. Battery: from 4.0 Ah 36 V to 18.0 Ah 36 V Lithium Range: from 1 hr to 6 hrs Full charge: from 2 hrs to 7 hrs Speed: 10 Kmh max

Milovan Medojevic, Milana Medojevic, Danilo Nikolic, Milos Milasinovic, Andrej Katin
Lego, factory, automation, industry 4.0, IoT, manufacturing, press, compressors, conveyors, robotic arm, energy efficiency and management, data aquisition, simulation, optimization, modeling, education, students, practical example, practical learning.

Pignataro Matteo
This project aims to convert the energy of the lightnings into usable and useful electric energy.

Andrea Cincotti, Marco Cincotti
Right key at the right time to the right person

PRESPAGLIA
WE MAKE CONSTRUCTION MATERIALS IN STRAW CLAY AND HYDRAULIC LIME.

Corrado, Monica e Leonardo Sperduti Rampini
MIOBIO, apartment greenhouse, domestic appliance for organic indoor gardening

Ryan Zellars (project) & Marco Brembati (build)
CNC created using a 3D printed, Arduino + RAMPS and other easily sourced hardware

Nakefit Team
The adhesive foot soles Nakefit L' Originale, minimalist way to get protected and feel free when you are barefoot.

Antonio Vricella, Roberto Pastore
Design-Manufacturing-Testing methods for radar observability reduction by means of nanostructured composite multilayered structures

Pietro Capaldi
Sistema di storage elettrico completo di un generatore a bordo ad alto rendimento e basso impatto ambientale da installare su veicoli elettrici di largo utilizzo.

Giorgio Maracchioni, Massimo Spaggiari, Edoardo D’Antonio , Anatriello Luca, Veronica Stanzione, Lorenzo Brunetti, Dario Colasanti, Gian Paolo Diaz Martinez, Martina Iannuzzi, Luisa Leyva, Francesca Pacini
Glasses with augmented reality for the production of cosmetics that allows traceability and quality of work, cost reduction.
  D18 (pav. 9) - Fondazione ITS per le Nuove Tecnologie della Vita
 2018

i2make
OPEN-EYES, THE OPEN-SOURCE SMART VIDEO DOOR PHONE THAT YOU CAN "APP-GRADE" LIKE YOUR SMARTPHONE

OpenMaker is aEuropean Project financed by the European Programme Horizon 2020
OpenMaker offers a unique opportunity for manufacturers and makers to test and scale new partnerships as part of its aim to seed and accelerate the 4th Industrial Revolution. The project aims to create a transformational ecosystem that fosters collective innovations within the European manufacturing sector and drives it towards more sustainable business models, production processes and governance systems.

Giacomo Guaresi & Leonardo Santambrogio
Device that stores, generates and manages more than 200 passwords in an extremely easy and secure way.
  E6 (pav. 8) - Giacomo Guaresi & Leonardo Santambrogio
 2018

Speak Science
Planets in a room is a DIY low-cost kit to build a small spherical projector to show the planets and the stars.

Sassetti Matilde V B Elettronica e Robotica, della scuola IIS Tito Sarrocchi Siena
I created an insole that can provide heat through a printed circuit and an APP to turn the device on.

Team Profacere: Alessandro Bruzzone, Doriana D'Addona, Margherita Monti, Ivan Rosciano, Sonia Borghesi
A maker version of 'Lego-Like' reconfigurable machine tool remotely controlled via internet, enabling modularity, scalability, integration of different manufacturing technologies

Pierluigi Zerbini
The common rear lights for cars use areas defined for the various visualizations, in this project with the use of multicolor lighting elements the various areas of a rear light can take any color, optimizing its use.
  B14 (pav. 6) - Pierluigi Zerbini
 2018

Federica Pascucci and CPS Alumni
Exploiting physical layer to protect cyber-physical devices
  H48 (pav. 5) - Università degli Studi Roma Tre - CPS Alumni
 2018

Tauan Bernardo
A machine system that upcycle PET bottles, creating a material that can be used to create many products.

Giuseppe Talarico e Claudio La Rosa
The project allows to explore the world of ternary logic and to use Trit instead of Bit.
  H13 (pav. 8) - Claudio Lorenzo La Rosa
 2018

RECO2 Srl
RECO2 is an innovative green startup offering products and clean-tech solutions for bio-building and circular economy.

Leone Francesca
Accessories and jewellery in recycling of inner tube...what it seemis not always what it is...

Felix E. Klee
A computer detects what you have constructed out of spheres and rods.

ANDREA BELLI, ALEXIA, DAVIDE, FILIPPO
A MANUAL WHEELCHAIR FOR CLIMB STEPS AND LITTLE STAIRS WITH ONLY THE STRENGTH OF THE USER ARMS

Ing. Flavio Lanese
Innovative patented, anti-seismic construction system, based on the mechanical assembly of reusable modules that can be made of different materials

Luca Tencati , Luca Gaspani
Our project involves the construction of a completely modular, flexible and versatile production line with the aim of filling, closing and labeling a personalized can directly from the customer by the web.

3AI e 3BC I.T.T.S. "Volta" Perugia
A small user-programmable multi-purpose disk made of recycled paper with a NFC chip inside usable for greeting or emergency cards.

Visual Computing Lab – ISTI CNR
Advanced technologies for innovative cast-based digital fabrication, Tensegrity design e processing models for 3D printing

Marco Simonetti - Diego Zabot - R3place - Biennio 2016-2018 TIB dell'ITS A.Volta di Trieste
Customizable Ergonomic Supports in 3D printing to improve the driving of electric wheelchairs and APP to support the clinical practice
  C9 (pav. 9) - Unioncamere - ITS A.Volta di Trieste
 2018

OmniDynamics
Strooder is plastic filament extruder, designed to convert raw or recyclable plastic into filament for your 3D printer.

Francesco Fusco, Daniele Sabatini, Stefano Sabatini, Bitjam
Visible light used in order to open the garage but also to talk to the car behind us
  C13 (pav. 5) - Francesco Fusco, Daniele Sabatini, Stefano Sabatini, Bitjam
 2018

BEATRICE AMODEO - AMOD
Research on poor materials and their interaction with light brings to Wanda; a lamp made of polypropylene straps intertwined completely by hand on a laser-cut Plexiglas support. 150 holes - 600 intertwined Beauty, inventiveness and patient manual work are combined in a unique piece of furniture.
  C1 (pav. 6) - AMOD - MARINA SANTANIELLO - SBOTTONANDO - ALESSANDRA - BETTA ISMAN BIJOUX
 2018
 
Data updated on 2021-11-09 - 11.51.35 am