- 3D PRINTING
- HOME AUTOMATION
- INTERNET OF THINGS
- KIDS & EDUCATION
- RECYCLING & UPCYCLING
- YOUNG MAKERS (< 18)
- ARTIFICIAL INTELLIGENCE
- OPEN SOURCE
- NEW MANUFACTURING
- WELLNESS & HEALTHCARE
- ENERGY & SUSTAINABILITY
- FOOD & AGRICULTURE
- 3D SCANNING
- CULTURAL HERITAGE
- MUSIC & SOUND
- ARTISANS & NEW CRAFT
- FASHION & WEARABLES
- STEAM PUNK
Medaarch s.r.l. s.t.p
CAD is a center of excellence for training and consultancy on innovation issues, the only place in Italy dedicated to re-launching craft activities
David Massaroni e Liberati Simone
For years, Climax has been working in the field of education, education and the development of workshops suitable for students of all levels. We have always given great importance to the teaching methodology and we usually opt for the most innovative solutions that seek to stimulate curiosity in the student and that are at the same time capable of showing the charm of Science.
A fully-automated miniaturised photometric analyser for water monitoring featuring SLA 3D printed opto-fluidic components. Applications include environmental monitoring, hydroponic/aquaponic automation, industrial process control and much more.
Alex Braga, i professori Francesco Riganti Fulginei e Antonino Laudani dell' Università di Roma Tre
A-MINT, created by Alex Braga and professors Francesco Riganti Fulginei and Antonino Laudani of Roma Tre University is a versatile artificial intelligence software that works in real time with the musician for the musician to allow him to develop infinite creativity . A-MINT, in its Experience version, will be present as a "testable" installation at the next Maker Faire Rome 2019.
Massimo Barbaro, Paolo Meloni, Matteo Soccol, Antonio Perra, Silvia Loddo
ACUADORI is a distributed wireless sensor platform to accurately remotely measure the water stress level of vineyards.
A huge amount of agricultural plastic waste invades the planet. The plastics of petroleum origin assume particular importance from the environmental point of view, which often do not proceed towards a rational process of treatment, collection, disposal and / or recovery. An ecological alternative is represented by our bio-spray, an aqueous solution based on polysaccharides, which generates a protective geo-membrane covering the ground, which after performing its function, turns into biomass, water, methane or anhydride carbon.
Isabella Pisano, Elena Ciani
Value chains designing applied to agro-industrial by-products is a innovative approach in order to increase social and environmental sustainability.
Alberto Bigazzi e gli studenti del Plinio.
Understanding air traffic control by Making a console showing available position data transmitted by airplanes captured through Software Defined Radio
Giuseppe Massaria, Antonio Idà
ALAN-2 is a tracked Robot for military use. It has GPS, supports automatic learning, autonomous navigation and the NAV function with which it is possible to give a mission. The ROS system combined with a Neural Network provide access to the A.I. It is equipped with a Smart Charging Station (custom).
Albicchiere Team: Massimo Mearini, Diego Pepini, Emanuele Pangrazi, Luigi Palumbo.
albicchiere is the smart wine dispenser that allows bringing the consumer experience to a higher level, serving them the best glass of wine: at the ideal temperature and always as if it were just opened.
Matteo Francavilla, Mauro Marone, Paolo Marasco, Massimo Monteleone
Upgrading of liquid waste (anaerobic digestate) to high quality culture medium for microalgae production and conversion in advanced bio-products and fuels.
Associazione Medici di Famiglia per l'Ambiente di Frosinone e Provincia - FabLab Frosinone APS
Ancler®: simple and inexpensive real-time atmospheric monitoring. An ethical project to safeguard health and the environment, against pollution.
Odoardo Savo - Stefano Palone
Portable burglar alarm with rechargeable batteries that produces an alarm sound when any door and window is opened in your room or apartment.
British Interplanetary Society
Set of practical activities designed to introduce about Apollo lunar missions in an funny and engaging way.
A desk with illustrative material of our company, possibility to have fun with interactive gamification paths about circular economy, vision of our conference show, BLUE REVOLUTION, on the tv.
Raffaele Settanni, Danila Chiapperini
ApuliaKundi deals with research on microalgae, produces organic, natural, pure and Made in Italy SpirulinaK, promotes scientific dissemination
Unione Astrofili Italiani
Crafting, passion and astronomy knowledge applied to astronomy popularization and inclusion, because everyone has the right to “see the stars”
Odoardo Savo - Stefano Palone
Smart autotracking 360° camera
Dott. Francesco Maria Bucarelli, Dott. Giacomo Peroni, Dott.ssa Cristiana Cireddu
"black garlic" means a processed product obtained by prolonged heat treatment of fresh garlic.
Sara Castria, Lorenzo Rattalino, Alessia Remondino, Roberto Romanazzo, Giada Zanti, Giulia Lamarca, Federico Chiumento (Tutor), Gaia Marchetti (Tutor)
An invention with which people in a weelchair can carry easily a newborn.
Alberto Marzaioli" Balance Bike - A wooden bike for children aged 2 to 6, which allows them to develop balance and fine motor skills. The project has no commercial purposes and has been developed for scientific / educational purposes ( Duryng the Fab Academy 2019 cycle ). The project can be downloaded for Free and replicated in any other part of the World ( FabCloud archive ).
Walter Setti, Monica Gori
Novel technological solutions for the learning of mathematical concepts in primary schools and for the training of cognitive skills
Solution for mobility is the ability to move independently in familiar and unknown environments with maximum safety and minimum effort.
Daniele Valentini, Vincenzo Mulone, Leonardo Mascarino
A 400W Wind Turbine that you can take with you anywhere. Light, easily assembled and efficient.
Smart Mobility Solutions S.r.l.
BikerTop®: World’s First Pop-Up Shield Cover for Bikes. A groundbreaking system that protects cyclists from rain and wind. The cover pops open from the handlebar in just a few seconds, providing a shelter from the rain during journeys.
BIOVOICES, Biobridges, STAR-ProBio, LIFT, EuBioNet
The BIOECONOMY Village aims to raise awareness, improve knowledge on products of renewable origin and promote the applications and benefits of the Bioeconomy, circular economy and sustainability, encouraging dialogue, discussion and sharing between the general public and representatives of universities, research centers, projects, companies, associations and start-ups.
Simone Cardillo, Vincenzo Gerardi, Emiliano Sacchetti, Alessandro Del Signore, Riccardo Placitelli, Lorenzo Conti, Davide Fiore.
NANO© by BioPile is an automatic indoor growing device. It can grow many king of vegetables and plants by a patented technology and a research lever software. It also recycle water and filters Co2 constantly.
Prof. Antonio ZUORRO
Biorefineries 4.0 to demonstrate practically how to turn agroindustrial wastes into value added products such as cosmetics and nutraceuticals. Bioeconomy starts by a circular approach in food sector.
Boboto promotes Montessori pedagogy through the production of materials with new technologies, and coding and the concept of digital citizenship through workshops that encourage the active and conscious use of new technologies.
MARCO BARUZZO, CARLO FONDA, SARA SOSSI, GAYA FIOR, ERIKA RONCHIN, ENRIQUE CANESSA
Our Bora simulator has three powerful electric fans (normally used for big inflatable structures) producing a strong airflow, controlled by Arduino and some sensors, to recreate the effect of Trieste's Bora wind and its blasts. You can choose between "Light Bora" or "Dark Bora" (i.e. mixed with rain). The simulator is contained within a structure reproducing a classical view of Trieste, and the Bora wind is blowing from a window.
Michelangelo Bornò, Franco Ferrini
Robotic arm, with six (6) degrees of freedom, made with a new type of 'back-lash free' articulation.
Camillia is a "Hack" of the "Lampan" lamp by IKEA. The change allows it to become a RGB lamp with the particularity, in addition to the more classic functions, of being able to change the color of the light emitted to make it homogeneous with the color of the surface on which it is placed.
cristiana luisa marconcini, rita audino, giorgia pietraforte e valentina pietraforte
the ns. project consists in using waste material and recycling it, we use fabric, shirts, sheets, curtains, pillowcases ect ...... reinventing other products for everyday use
The production activity consists in processing the hemp straws harvested from the agricultural supply chains to be transformed into the two constituent parts: the shives (wood internal part) and the technical fiber (short) that will be used for different industrial applications. Our goal is to relaunch the agricultural and industrial chain of hemp on the Italian territory and in particular in the south, thus creating a great opportunity for young farmers and entrepreneurs who, instead of having to leave the wonderful regions of Southern Italy in search of work, can achieve something concrete and innovative in their own land.
ANDREA BELLI, ALEXIA, DAVIDE, FILIPPO
A prototype patented economical electrical trolley capable of climb steps and stairs also for transport persons
Corrado Costa, Simone Vasta, Francesca Antonucci, Francesco Tocci
LoRa based on open source technology for precision irrigation and remote field traffic
CHEF, an innovative, compact, sterile, fully computerized hydroponic Vertical Farm, for healthy and clean cultivations at 0Km.
Gruppo Chicken Counter
Explore with the children the world of numbers and the beauty of mathematics, stimulating emotions and interest, through a challenge between two opponents who will compete in increasingly difficult and complex levels.
Chokkino is the first cacao espresso, the functional beverage made with pure cacao, the perfect alternative to coffee!
Daniele Dell'Orco / Flavia Lombardi
Cacao Crudo is a new way to produce and savour chocolate. To preserve the precious qualities of the cacao and the other ingredients we are constantly seeking new production methods and new ways to enjoy it. Cacao Crudo is the supply chain we want!!
Codemotion Kids! is one of the most important references in Italy about the technological education for young people. The headquarters of the School of Technology and Creativity is in Rome, where the yearly workshops, Saturday Tech and AdaLabs, are taking place, during which the young participants use coding, robotics, electronics and design to create and give life to their ideas. Come and discover our activities 2019-2020!
Prof. GUENDALINA GRAFFINGNA
Engaging patients in their heathlcare and wellbeing: the PHE-S (Patient Health Engagement Scale) and its possible applications in the digital health era
AETERE'S - Andrea Amato, Roberto Amato, Roberto Zucchelli
AEtere's technology works on the condensation of the electromagnetic energy due to the steady increase of high frequency technology that taints the electric network creating a new kind of pollution named Dirty Electricity
Associazione Promozione Sociale SalvaiCiclistiRoma
A low cost device to monitor biker, pedestrian and runner traffic along a cycle path. A tool helping citizens to call pubblic officers and politicians attention to their needs.
Cubbit | M.Moschettini, S.Onofri, A.Cillario, L.Posani
Let’s recycle the internet we waste to create a green & encrypted cloud that is forever-free for its users!
Daniele Loddo & FabLab Ostia
Cucciamatic takes care of the management of our dog and is able to: -Provide the right ammount of water and food, during the hours set by the owner; -Control our dog with a webcam via the Internet; -Provide a resting place with the right temperature for the dog.
Riverview High School, Science 10, Physics 12
Students design, solder and 3D print lights and distribute students who are living in light poverty. @TeachSDG Education and Energy.
Estrazione del lattosio da siero di latte per la produzione di bioplastiche 100% biodegradabili verso un' industria smart e sostenibile
Katelab. Anna Zaniboni, Marina Bonsi, Pamela Sambri, Francesco Gurioli
Katelab deals with investigating needs, designing, prototype and create collaborative furnishings that can act as rehabilitating elements
Timothy Frégeau, Elena Panciroli, Oriane Anita Rainero, Giorgio Ratti, Natali Ristovska
A musical instrument that allows children with motor disabilities to learn, produce music and play alongside other people.
Elio Romano, Alex Filisetti, Annamaria Stellari
This project is part of a broader research project concerning precision agriculture, that is, that set of techniques that allows reducing the use of inputs in agriculture (water, fertilizers, plant protection products, labor, processing, etc.) while increasing yields thanks to intelligent systems that, monitoring the environmental conditions, provide information and early warnings to farmers who will be able to intervene more effectively and in a targeted manner, gradually abandoning the rigid patterns of the past.
Marco Baruzzo, Carlo Fonda, Sara Sossi, Gaya Fior, Erika Ronchin, Enrique Canessa
This DIY "Cloud Chamber" makes visible to the naked eyes a number of tracks of elementary particles like electrons, protons and muons.
Belt drive system for pedal assisted cycles
EasyEM: M. Bulgarelli, W. Falzoni, G. Angelini
Do it simple.... with the sweatshirt you close with one hand.
Nicola Rossi, Fabio Roveti
e•fló a bracelet with invisible technology, alerting children away !! Thanks to a slight vibration.
CRISALIDE DESIGN SPACE
Egg-O is a wearable cradle, born by a social project, to give a chance to all mums and children ,running away from war bombing or natural disaster, to move easily and fast, being protected by day and providing comfort to rest by night
Team EmotionWear: Sara Savian, Alessadra Trestini, Mauro Alfieri
Emotionwear is a fashion tech collection made with digital fabrication in a fablab featuring wearable devices expressing the wearer emotions.
Alessandro Cammerata, Roberto Mortaro, Luigi Benedetti, Simone Figorilli, Paolo Menesatti
A solar-powered “pasta dryer” managed the IoT technology.
Loris Ferro, Luigi Cabaletti, Vladimir Bellomi
EV.tre is a smart wallbox for EV charges with dynamic current regulation according to the real time power consumption of domestic loads. The power absorbed remains always within the max output power of the power meter so the protection circuit breaker will never be unforeseen activated, granting a safe and optimized charge of your EV.
With Evolving Virtual Room, you enter paintings and works of art from every era, immovable sculptures and exhibits materialize and become interactive in the middle of the room.
Team: Idealizer: Weslley Lioba Caldas Coordinator: José Gleisson da Costa Germano Advisor: Sandro Costa Mesquita Researcher: Tiago Diógenes de Araújo
The project consists in a glasses for visually impaired with the objective of aid the user's displacement,giving a better independence.
Credits Jie Zhang, Architect and General Manager at Pelli Clarke Pelli Architects Raffi Tchakerian, Assistant Professor at Dubai Institute of Design and Innovation (DIDI) Sayjel Vijay Patel, Assistant Professor at Dubai Institute of Design and Innova
Eyemotion interprets emotions from the facial expressions of people as new environmental factors that are manifested through a shifting display of colour and form as corollaries to a spectrum of psychological states, as either reinforcement or intervention.
The FabTrolley is a suitcase addressed to a regular traveler, lover of nature and outdoor travel. It is also suitable for the professional who travels frequently, and who does not want to give up a soft bed to rest a few hours at the airport, waiting for the next flight.
Fabrizio Di Vittorio
VGA Controller, PS/2 Mouse and Keyboard Controller, Graphics Library, Game Engine and ANSI/VT Terminal for the ESP32
Associazione Verona FabLab
The FabVan (Fabrication Van) is a mobile experimental laboratory for social innovation provided for the local community.
The common rear lights for cars use areas defined for the various visualizations, in this project with the use of multicolor lighting elements the various areas of a rear light can take any color, optimizing its use.
Fondazione Mondo Digitale
Fashion Digital Night is the initiative, promoted by the Fondazione Mondo Digitale, with the aim of accelerating the digital transformation of the fashion sector and developing new skills and professional profiles among young people.
uno@uno makes simplicity and "zero annoyance" its own high road. Easy easy recycling. Citizens are assigned a personal code, also reported on special adhesive labels, differently colored according to the type of waste. By putting the right label on a common bag you will have a correct differentiation and you will receive discounts on your bill. uno@uno can also be applied using old street bins, without any new investment and without new costs, freeing citizens from annoying weekly calendars. In municipalities, one @ one the waste management spending decreases, both for the administration and for those of families.
Marco Faimali, Nicoletta Nesto, Fantina Madricardo, Fedra Francocci
Plastic and its multiple uses have changed our lives in just a few years. Yet the use we make of it has caused a heavy pollution of the places we live in up to compromising our environment and having repercussions on our health. Communicating the new technologies, materials and uses we can do to create a dialogue aimed at finding solutions.
Federica Caruso, Serpil Erdönmez, Lara Ferruccio, Martina Spinelli, Marco Bencivenga
A pair of glove that allows children with dyscalculia to learn, understand and memorize math, in particular, the table numbers.
Rechargeable and with multiple light sources. That's the real multifunction pocket torch to travel around safely in the city jungle.
The maker community from aachen presents some of their projects, e.g. enlighten art, done with LEDs and lasercutter, 3D printer etc. as well es some usefull projects for people with impairment.
Antonio Di Giovanni
Funghi Espresso is an innovative startup, which produces fresh mushrooms in a sustainable and natural way, using the coffee grounds from the bars and restaurants of the territory as a substrate for the cultivation. In addition to the production of fresh mushrooms, Funghi Espresso is specialized in the production of substrate ready for mushroom cultivation (kit).
Gianluca Ciuffreda, Alessandro De luca
Let's have fun while learning electronics and building smart devices ! Programmable electronic boards in assembling kit, equipped with schematics, components and instructions so that users can have fun while learning electronics.
Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
Gemini is a smart DC motors controller for application that requires constant speed.
The Giant Breadboard is meant to acquire knowledge and understanding about basic electronic principles and facts and to train skills in breadboard prototyping in a playful way.
Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems
Valerio Joe Utzeri; Anisa Ribani; Samuele Bovo
GRIFFA controls food DNA using innovative technologies and algorithms by detecting ingredients, allergens and pathogens in food.
Francesco Rodighiero (Tutor), Ludovico Russo (Sviluppo Software ed Elettronica), Alessio Crivelli (progettazione 3D e Hardware), Teo Bistoni (Supporto programmazione), Daniela Meroni (Organizzazione, supporto sviluppo e collaudo), Rossella Indaco (Support
A tactile map of Italy presents buttons for each region. When the buttons are pressed, audio tracks are reproduced that describe various aspects of the region.
HAELLO is an open innovation project around wearable technologies in artistic disciplines that involve the use of the body and data, both physical and biological, produced by it.
Manuel Dadda, Stefano Picco, Andrea Zoli
Drone used in case of eathquake, take photos to buildings, show probability to find people trapped thanks to artificial intelligence.
Fondazione Mondo Digitale
The European Holomakers project approaches high school students to the study of STEM subjects, thanks to new teaching methods, such as the creation of holograms and the processing of virtual images.
Laboratorio Biotecnologie - Divisione Biotecnologie e Agroindustria ENEA
Protected HORTiculture resistant to EXTREME conditions, for the production of high nutritional value plants: a field experiment in the AMADEE-18 mission
Roberto Ricci - Biosearch Ambiente S.r.l., Prof. Alessandro Piccolo - Università Federico II di Napoli
From organic waste we can produce humic acids (HA) suitable for environmental remediation or for agricultural use.
HURBA is the first true electric scooter in Italy with a removable battery. HURBA has also patented an innovative battery that recharges in 12 minutes and lasts 120 years.
Giorgio Bernardini, Alberto Conte, Luca De Ponti, Tommaso Pa
Hydrocarbot can purify water from oily substances(oil, fuel, diesel...) making them reusable.
I scream for Gelato - Italian stories about Food Design showcases a selection of products from ADI Design Index and 14 gelatos made in Lazio.
TELEX COLLECTOR GROUP
The Teleprinter world and its old network as it was yesterday and how we bring it back to life in today's Internet era. It is possible to chat with a teleprinter made in the 50's and connected to a network of collectors around the world from Australia to Europe or Canada or you can punch your name on a punched tape. You can send an email to an old telex machine and see how it prints it.
Emiliano gatti, Gianluca Meola
The first educational robotics kit on Leonardo da Vinci, a kit to learn Leonardo's history and inventions in a technological key, training logic and developing problem-solving skills in kids.
Distori Heritage – UNIVPM
Dissemination and safeguard of Cultural Heritage through perfect Facsimiles and Mixed Reality: the new challenge of Digital Documentation.
Associazione Creanatura - Wps multimedia
THE DESCENDER OF EARTH The Descender of Earth is a multimedial traveling experience of Natural History. The fantastic travel agency Volvola, the captain and all his crew will lead you in an educational travel toward the center of the Earth. Traveling by the Underground 0, a descender vehicle, able to cross all the layers of the planet and push itself until the center of the Earth and further.
The Rome Technology Park System offers companies, medium, small and large, and start-up in the start-up and growth phases, spaces equipped to carry out activities with a high technological and innovative content, for the design and implementation of new ideas, new products and services, in an environment strongly oriented towards collaboration and networking.
D20 (pav. 7) - Tecnopolo
Will presents a range of products designed for lighting industry and complex architectural scenery: Wire Controllers and Wifi Floodlights
Pallottino F, Figorilli S, Menesatti P, Scarfone A.
Pilot plants based on rims technology (Recirculating Infusion Mash Systems) and temperature pid management for research & development in the brewing and distillates chains.
Industrial electronic regeneration: The Circular Economy makes possible to reduce the time and costs of plant downtime.
Raffaele Ferrante, CEO. Daniele Bianchi, CTO. Marco Mannisi CPO.
Low-cost personalised custom-made foot orthotics using IoT and 3D printing
Agenzia Regionale per lo Sviluppo e l’Innovazione dell’Agricoltura del Lazio (ARSIAL), Ente di diritto pubblico, strumentale della Regione, istituito nel 1995 (LL.RR. 2/95 e 15/2003, aggiornate al luglio 2014, L.R. 7/14).
Protection of indigenous animal and plant resources at risk of genetic erosion through the L.R. n. 15/2000 managed by Arsial
The innovative Mag Spark technology produces electricity by exploiting low pressures using Green gaseous vectors Mag Spark is effective in cutting costs with new concepts for building and upgrading existing systems in the Green sector of already known systems In addition, the high reliability of Mag Spark technology makes maintenance costs intangible
Arduino Solar Tracker, a fast and efficient project to safeguard the environment. Solar tracker is not only easy to use but is also inexpensive.
Maria Buoncristiano, Luciano Florio e Donato Manta
The project aims at making Braille known and promoting it by making it become every child's heritage.
Eugenio Sabatella e Massimo Marini
IoT network for critical infrastructures and earthquake monitoring system
Fondazione Mondo Digitale
Kit:Cut is ambitious research project promoted by Fondazione Mondo Digitale and dedicated to schools. The idea is to propose customizable templates based on the activity that each trainer wishes to experiment from time to time and that can enrich the original idea, according to the sharing knowledge economy approach: from the tools for customizing to tools Intelligent furnishings.
Fashionable eco-friendly backpack for everyday life
This project is a home automation in miniature ... It is not a normal home automation but it is an innovative house that points to the future because it is also environmentally sustainable.
Millepiani - Anna Grossi Giardiniera Paesaggista - L'Altro Abitare Architettura Sostenibile - Wildnest Bioarchitettura e Feng Shui
Millepiani Coworking created -Healthy Home- an -open zone- to explore new tools, movements and mindsets to make cities and technologies for people. Our proposal brings together the bio-architecture and living wellness skills which are dedicated to sustainable design, using innovative materials, technologies for energy saving and the creation of living environments that promote physical and psychological wellness.
06Scienza - Edoardo Bianchini, Federico Baglioni, Flavia Cappelloni, Arianna Campitelli, Beatrice Calabrò, Riccardo Schiavi, Ilaria Zappitelli, Martina Fustolo, Simona Pascucci.
Scientific experiments and interactive demostrantions of physics, chemistry, biology, ecology for adults and children through 3D viewers, microscopes and much more.
Alberto Bigazzi e gli studenti del Plinio.
Educational project aimed at demonstrating the capabilities of an electromagnetic launcher for sending Moon-produced materials to Space
Mariglen Ymeraj, Filippo Guerra, Davide Cassanelli, Giovanni Gibertoni, Giuseppe Antonello Gentile
Laser Engraver is a small CNC machine for engraving images on several materials like wood, plastic, leather and many others.
explore remote spaces just a videocall build your personal robonoise and take control from remote.
SpeechTek e i3 della Fondazione Bruno Kessler (FBK)
Artificial Intelligence solutions for linguistic evaluation and to support deaf and dyslexic children in learning.
main author: Mario D’Ettorre, Armando Altieri, Roberto Seghini co-author: Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
Led Hockey Game based on multigame Led Interactive Platform v. 2.0
Marino Attini con SCEN e supporto di Unione Italiana Ciechi e Irifor
Obiettivo del progetto LETIsmart è fornire massima autonomia e sicurezza alle persone non vedenti o ipovedenti in ambiente urbano. Il sistema si compone di due elementi da sostituire sul normale bastone bianco, senza però andare a modificare ergonomia, peso e caratteristiche di questo strumento di precisione. LETIsmart LUCE va a sostituire il segmento vicino alla punta con uno di uguali dimensioni ma capace di emettere una fonte luminosa bianca e pulsante; LETIsmart VOCE va a sostituire il manico del bastone bianco per ciechi con uno pressoché identico che all'interno contiene un sofisticato sistema che permette di informare il non vedente su quello che lo circonda.
Marco Baruzzo, Carlo Fonda, Gaya Fior, Sara Sossi, Erika Ronchin, Enrique Canessa
Stepper-motors controlled by Raspberry Pi and videocamera are used to point a laser beam and destroy pests (Halyomorpha halys) and mosquitoes.
Lumi Industries - Davide Marin
The first incredibly low cost DIY Open Source visible light resin 3D printer for smartphone. A maker must have!
An experimental exhibition in Augmented Reality on less-known facts and curiosities about the lunar missions from the 60s to our days promoted by EduTech Codemotion Kids Research and Development.
Nina Aleksic, Annapaola Di Pierro, Ginevra Gallo Perozzi, Chiara Quattro, Alice Raimondi Crainz
Lup is an interactive game for children able to develop memory, reactivity and competition.
This is a project for a large 3D CNC router kit. It is easy to ship, mount, use and secure to operate. It offers all the feature of an industrial machine but is affordable.
Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome.
Alessia Crova, Andrea Cattaneo, Benedetta Torti, Lorena Baiocchi, Silvia Rossetti
Marvel - Toys for all is an intercative game that encourages blind kids and not, to learn the braille alphabet and inclusion
Sindaco Vito - Perito Elettronico
MASTER CLICK: command interface to allow, improve the accessibility and usability of the computer or smartphone for disabled people.
Riccardo Andrea Carletto, Alessio Varesano, Claudia Vineis
Research and innovation of textile materials, sustainability of industrial transformations and functionalization of textile fibers for conventional and technical applications.
D.ssa Capobianco Veronica, Pastore Maurizio, Cislaghi Roberto
Micronebulisation of H2O2, innovative photocatalysis LED and WO3, cold plasma: to achieve sanitised first contact surfaces and to prolong the shelf-life of the food.
Francesco Ficili, Anna Falco, Antonio Volpe
The Mercury System is a modular HW/SW development system which simplifies design and implementation of Connectivity and IoT applications.
Annamaria STELLARI, Paolo Walter ANTONIOLI, Tiziana M.P. CATTANEO - CREA.IT Milano e Treviglio
Mini dryer and solar dehydrator for food processing, equipped with sensors in the near infrared (NIR), camera and Arduino technology for the control of physical process parameters.
Federica Andreola, Daniela Giovannini (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!
Federica Andreola, Daniela Giovannini, Mauro Fabiani (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!
main author: Roberto Seghini co-author: Armando Altieri, Mario D’Ettorre, Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
MiniLab 2.0: portable Electronic Mini Lab for Makers - electronic development for makers make easy
E. Canessa, L. Tenze
Carousel of historical or real-time stereoscopic images, converted into holograms using our Morpholo program running on Raspi 4, which allows to generate and visualize a 3D scenario with a minimum of inputs and headset-free.
MOSAIC is a project created to promote inclusion at school for people affected by Autism, and to overcome socialization hindrances of these students.
Pierluigi Zerbini & Andrea Orazi
Motoalert measures the distance between our bike and the car that follows and warns drivers if it becomes too short on an LED display. It is managed with a bluetooth smartphone app.
Enzo Cimino / FabLabRoma/InnovationGym
MusicFabLab, an initiative born in the FabLab of the Fondazione Mondo Digitale to bring the world of music closer to that of making. At Maker Faire an interactive installation, composed of plants and Arduino sensors, will reproduce sounds and give life to a collective performance.
Loretta Bacchetta, Silvia Procacci
ENEA BIOAGPROBIO and CNR-STIIMA: production of nanofibre-based electrospinning membranes made from extracts of Opuntia Ficus Indica cladodes.
main author: Mariarosaria Emanuele, Alessandro Morello co-author: Mario D’Ettorre, Armando Altieri, Roberto Seghini, - the IoT team @ TecnoStudio Ars Innova
NBE_SmartPlug: a smart power limiter, your lights will never go out again
NightmareV2 is a 3kg full metal spider robot made of 26 smart servos and lot of sensors including a 3d camera and a powerful computer for autonomous navigation.
DIM design lab
My intention is to bring out the potential hidden by elements that we often throw away transforming them into design products
The project selects resilient good practices for climate change for agriculture that translates into technical and training tools.
L. Colombo, M. Fontana, A. Merli, A. Valente, F. Vittorielli
Our game was born with the intent to make children collaborate and learn, to reduce differences and obstacles physical. Come to discover Nuvola!
"Transforming a dream into a real project, where our products are a novelty on the market and represent reliability, cost-effectiveness and solution to the problems of waste management"
We make sunglasses with prickly pear's fiber and olive wood. The result is an exlusively accessory No Waste and 100% ecosustainable
ODESSA (Obstacle DEtection Sensor for Surveillance on Aircraft) an agile, affordable, and reliable obstacle detection system.
KIDS ISLAND 1 (pav. - MindSharing.tech APS
Reason out Factory
OPEN LITIO is a battery case that allows you to have a battery without welding, easily regenerable and completely recyclable.
Valerio Campari e Andrea Marenghi
The hardware for the 4.0 revolution. This system allows makers to bring their projects, constructions, to a professional level.
OR-DOMO The didactics for Home Automation. Modular and scalable project to teach Domotics at every level.
"ORBITA" wins the 6th "Design and Creativity" competition promoted by Roson & Coccolo furnishings and BibanArt by Ivan Pressi, which had as its theme the creation of a hanger and an umbrella stand.
Greta Thunberg and climate change are two subjects that are too serious and important for the future of our planet to not even address them by Maker. Building an innovative educational garden with photosynthesis stimulators and sensors with BioPic school kitchen garden is for everybody.
A robot that cultivates a small vegetable garden in autonomy. With an application you can decide what to cultivate...he takes care of the rest! A notification will notify you when the crops are ready.
Modular Musical Instrument. Each module (1 octave, 12 dynamic keys ) can be used individually in stand-alone mode or assembled with others composing a full piano keyboard. The same object can be used for studio writing or recording, then musicians can use 1 or 2 octaves, or for live performances, then they can use 7/8 octaves. The modularity of the tool reduces its size, and thus favors the transportability.
Daniele GUI, Sabina MAGALINI, Pasquale MARI
The boundaries of cybersecurity in healthcare: how to provide hospitals with the best possible behavioural and governance tools?
EasyEM: M. Bulgarelli, W. Falzoni, G. Angelini
"amABLE the pant for you". Pants for people with reduced lower limb function. Do it simple.
VAHA - Virtual Architetture Handicraft Art
Hundreds of designers from Italy and the world, dozens of companies, makerspaces and fablabs for Pattern Your Life, the design of multiple patterns as pieces of a mosaic under construction for the digital revolution in manufacturing.
This project is a pedal board and a maker style joystick, in fact it was printed with a plasma laser and folded with a hydraulic press, I used 3 potentiometers: accelerator, brake, steering wheel. All this controlled with arduino using the UnoJoy library which allowed me to simulate a Joystick, what this means, when I connect the arduino to the PC it is not read as arduino but Joystick. It is possible to use it with any game, for the respect I made a video on Youtube only of the steering wheel here is the link (https://www.youtube.com/watch?v=nCQKoZ5gcmk&t=1s) is a DIY project but with this does not mean that the details have not been taken care of, I am attaching the photos below. Hope you like it !!
Carlo Fonda, Enrique Canessa, Marco Baruzzo, Erika Ronchin, Gaya Fior, Sara Sossi
We show the last version of our open-source extruder for volumetric 3D-printing from plastic pellets (also from shredded waste).
Daniele Leandri, Beppe Pennesi, Ambra Pascarella, Guido Leandri
We can create a wide variety of objects from used plastics using simple "home-made" recycling techniques.
Nico Capogna (CEO)
Pin Bike is the kit that turns your bike into a smart bike and rewards you for what you use it! Patented monitoring system (bicycle and car pooling) for mobility management.
Circular economy - Reduction of polluting gas emissions - creation of an international network of people who share the commitment and sustainable actions to work towards an ecological and environmental literacy - creation of a short chain of waste management - exploitation and re-use of the resource.
Scuola di Ingegneria Aerospaziale
Integrated bioanalytical system based on lab-on-chip technology for the detection of lifemarkers in planetary exploration missions
Andrea Rastelli, Graziano Pepe Muzzurru, Mina Spasenovski, Mattia Yuri Messina
5 meters 3d printed model of a mosasaurus with augmented reality interactions
Antonio Onidi e Davide Del Nista
"The CNC foam cutter is a simple and easy to use machine, ideal for hobbyists and DIYers"
PolyShaper is the only desktop solution for styrofoam cutting in the world entirely made in Italy
Ponics designs and manufactures aquaponics systems, which combine the growth of plant species with fish farming: a clean ecosystem that produces good food for all and safeguards the planet.
Design and marketing portable beach safe! (safe portable container)The safe is equipped with a 110 Db alarm sound system, 3D Motion sensors X, Y, Z, and Accelerometer
Gruppo operativo SIMODROFILA
The SIMODROFILA project proposes an innovative monitoring systems for sustainable control of Drosophila suzukii and other fruit pests.
ProMicroLoRa is a home-brew board that allows a LoRa modulation radio connection on the free 868 MHz frequency. It is very economical, consumes little energy, goes very far, requires little software that can be managed with the Arduino IDE and interfaces with many different sensors.
Team "Nao & forever" formato da: Lorenzo Manini, Luca Silva, Nasko Stamenov, Valentina Cannariato, Filippo Lin, Emanuela Braghieri, Filippo Carini, Federica Bessi, Federica Messa, Nicholas Azzini, Francesco Nicolini.
Electronic cubes allow you to solve problems related to mathematics or language, turning an educational activity into a fun activity.
Tatsuya Kaneko, Tetsuya Asai, and Hiroshi Momose (Hokkaido University)
A newly-developed reconfigurable AI accelerator for Arduino and the AI systems are exhibited. Everybody can touch and enjoy them.
Team ITT Giorgi
A remote controlled robot, useful for investigating disaster sites, analyze them in order to plan the rescue phase, retrieve images and estabilish an audio link with survivors
Restart / Laura Bernard, Marco Lucino, Paolo Sancamillo
Art collective focused on craftsmanship and recycling. In addition to creation, it carries out experiential activities through courses and workshops.
Reason out Factory
Retro e Tool is a retrofit prototipe usefull to convert agricultural motorized tools intoo electric ones: easy to build and fully functional.
Prevent E-waste now! Reware, the specialized social business that prevents E-waste through the refurbishment of huge amounts of IT assets.
Ri-ciclabile di Anna e Vale
Re-cycling means recovering materials destined for undifferentiated waste collection (no PET, paper, glass) to give them a second chance.
Rifò is an emerging circular fashion brand. We collect old clothes, we select them by color and quality to make a new yarn which we use to craft new apparels and accessories.
Riscarti, international festival of upcycling (music, expo and workshop) reuses obsolete materials and garbage, to rekindle ecological intelligence, re-design the idea of useless, offering moments of sociality, art and growth. Recycling costs nothing, it’s a culture's matter!
Tiziana Monterisi Architetto
RiceHouse produces natural building materials based on rice residuals and promotes circular economy "from the field to the house".
Fondazione Mondo Digitale
Road to RomeCup2020 enhances the work of young people who develop original prototypes for international competitions and challenges launched by universities
DAM Bros Robotics
Robot designed to bring kids closer to programming and robotics. It offers endless possibilities for experimenting with the STEM disciplines (Science, Technology, Engineering, Mathematics).
Michele Cancelli, Mattia D'Angelo, Giulio Gaetti
With our project, we want to show how sometimes, we kid can and we are more enterprising than many adults. We have always tried to, even though small invention, to improve the world next to us or to report perished values. A mix between dated and future, between innovation and rediscovery.
Sergio Subrizi & Acme System
Rotala is a full featured woodworking router table, with electronic position control, Digital Read Out touch screen panel. The touch screen panel is a project by Acme Systems called "CM3 Panel", based on the CM3 Raspberry Pi board. The control panel "Rotala Panel" is an Open Source project that can be adapted to any personal project needing a DRO and position control.
Miriam Ronchi, Francesca Raimondi, Mattia Ventrella e Ülker Aral
Row-Ro is a custom made brace with an adjustable closure system designed for Rosina, a girl who has an incomplete tetraplegia, who wants to continue the practice of rowing.
Diet & food pyramid, the colors of food, packaging (formats, materials, sustainable packaging, smart-packaging), agri-food supply chain, authenticity & fraud
SASA - Sapienza Aerospace Student Association
The cultural Association Sapienza Aerospace Student Association helps the student to develop ideas and elaborate topics in aerospace field.
The School of Entrepreneurship & Innovation (SEI) aims to promote entrepreneurial inclination of university students, through training sessions in the classroom, operational experience in the world of innovative companies/startups and testimonials of entrepreneurs, investors and professionals.
ANDREA BELLI, ALEXIA, DAVIDE, FILIPPO
A prototype electrical patented 4wd wheelchair capable of climb steps and stairs
Food, house, health, energy, work, art and culture. Shamballa answers at basic human needs through digital fabrication.
Gaya Fior, Enrique Canessa, Carlo Fonda, Marco Baruzzo, Sara Sossi, Erika Ronchin, Fabio Bensi
A flexible screen composed by almost four hundreds pixels with an individually addressable RGD LED, for a great visual effect and able to display a range of colourful effects. This low-cost DIY screen in a future version will have a Kinect sensor to detect the position of a person or object standing in front of it, to allow interesting applications for education and gaming.
Sidereus Space Dynamics Srl.
Sidereus is a company with the aim of developing new space transportation systems through the space economy.
Prof Paolo Maria Rossini
EARLY PREDICTION OF ALZHEIMER DISEASE THROUGH BRAIN SIGNALS ANALYSIS
Gian Paolo QUARTA
TUBE-T3 is an IoT ATEX-sensor for pressure and temperature monitoring of a fluid or gas, with battery and LTE-CatM1/NB communication.
Matteo Cristini, Alberto Nidasio
We built a drone fleet with recycled material, to be able to monitor how climate changes affects water environments.
Francesca Bollito, Andrea Castelli, Federica Padovano, Eleonora Ferrero, Victoria Lopez, Ettore Fassino (Tutor), Gaia Marchetti (Tutor)
Squeezer 46 is a device for wringing out sponges and rags for people who don't have the full mobility of their hands.
Paolo Orsini, Natalia Kalinska, Diego Di Fabio, Lisa Tedeschini, Eliana Esposito, Emanuela Migliozzi.
Realization of objects and gadgets Steampunk and not handmade or with the help of electronic design and numerical control machines.
Pierluigi Zerbini & Andrea Orazi
A compact monitoring tool to connect to the car's OBD2 port. The color LCD touch screen display, shows all the information available on the car control unit. It is also able to calculate the power of the car in KW or CV in real time.
Sara Sossi, Carlo Fonda, Marco Baruzzo, Gaya Fior, Erika Ronchin, Enrique Canessa
Device with a big Fresnel lens, positioned to point the Sun, concentrating the natural light in order to heat and melt plastic granulates produced by grinding plastic waste. The objective is to create new useful object from waste, by fusion of plastic, casting/molding, and (in future) 3D printing. We will show example of objects made with the device.
Lorenzo Arnold, Matteo Brencic, Caterina Lauri, Bernardo Prempe, Edoardo Trombini
Interactive toy for blind children with the aim of developing their spatial perception and the association of sounds with images.
Martina Basteri: educatrice / Giuseppe D'Aleo: educatore e responsabile di grafica e comunicazione della multiservizi Nausicaa del Comune di Carrara / Gabriele D'Aleo: grafico e artista digitale
A videogame that tells the causes and consequences of pollution and the benefits of recycling and separate waste collection.