- 3D PRINTING
- HOME AUTOMATION
- INTERNET OF THINGS
- KIDS & EDUCATION
- RECYCLING & UPCYCLING
- YOUNG MAKERS (< 18)
- ARTIFICIAL INTELLIGENCE
- OPEN SOURCE
- NEW MANUFACTURING
- WELLNESS & HEALTHCARE
- ENERGY & SUSTAINABILITY
- FOOD & AGRICULTURE
- 3D SCANNING
- CULTURAL HERITAGE
- MUSIC & SOUND
- ARTISANS & NEW CRAFT
- FASHION & WEARABLES
- STEAM PUNK
V. Sperati, B. Özcan, L. Romano, S. Scaffaro, T. Moretta, N.Faedda, V. Guidetti, G.Baldassarre
+me is an experimental interactive toy, designed like a potential tool for therapy in Neurodevelopmental Disorders.
Pietro Capaldi, Guido Villani, Giuseppe Barese, Salvino Tanucci
A high efficiency low cost steam powerplant adopting alcohol mixtures, powered with renewable thermal sources and suitable for smart grids.
Pietro Amodeo (ICB-CNR), Francesco Castelluccio (ICB-CNR), Salvatore Donadio (ICB-CNR), Alessandra Rocco (INO-CNR), Simona Mosca (INO-CNR), Maria Parisi (INO-CNR), Valentina Di Sarno (INO-CNR), Gianluca Notariale (INO-CNR) - a cura di: MoSeF – ICB-CNR,
RoFlEx is a robotic exhibit to demonstrate fluorescence and spectroscopy, representing an attractive and effective tool for science communication.
Nicola Coppedè, Andrea Zappettini, Michela Janni, Filippo Vurro, Riccardo Manfredi
Bioristor is and innovative biocompatible sensor to monitor plant sap
Tiziana De Filippis, Leandro Rocchi, Patrizio Vignaroli, Elena Rapisardi, Bruno Guerzoni
Climate Services Open Source for developing countries. Climate services are important to foster adaptation to climate risks and in reducing vulnerability in developing world contexts. 4Crop web application gives the possibility to evaluate impacts due to drought stress during the whole crop growing cycle in Sahelian areas. SLAPIS (Système Local d’Alerte Précoce pour les Inondations de la Sirba) enhances the capacity of Niger Institutions to forecast, alert for and manage floods.
Francesco Sergi1, Marco Ferraro1, Davide Aloisio, Giovanni Brunaccini, Vincenzo Antonucci1, 1Consiglio Nazionale delle Ricerche – Istituto Tecnologie Avanzate per l’Energia “Nicola Giordano” Fabio Giusa2, Antonio Emanuel Colino3, Ada Di Stefano3
The project concerns the development of an active building component for the cladding of facades of new or existing buildings. This component was implemented through the integration of photovoltaic technology and energy storage. The object of the project was also the development of control and power electronics for managing the energy produced/stored, and the entire building system to be applied to vertical facades, including thermal insulation. The result was a building component prototype (70x70cm) that can be easily connected to other modules and installed on the wall. A demonstrator of a façade of 12 modules was realized for the experimental phase. The project was developed by CNR-ITAE in collaboration with Tecnicoop and SISC companies.
Ramona Magno, Tiziana De Filippis, Edmondo Di Giuseppe, Elena Rapisardi, Leandro Rocchi
Drought dynamics reveal a time gap between the onset of a drought event and the management of the drought emergency, but often this gap is too wide to effectively reduce the impacts. The Drought Observatory (https://drought.climateservices.it/en/) developed by CNR-IBIMET could fill this gap. It is an operational system providing Open, detailed and timely information and technical support to decision-makers, water authorities, researchers and stakeholders to enhance mitigation and adaptation plans. In particular, the coupled rainfall-based and satellite-derived monitoring system both provides multiple time scale occurrence and duration of drought, and allows the assessment of vegetation conditions at different spatio-temporal scales.
Paolo Cignomi; Visual Computing Lab – ISTI CNR
Advanced technologies for innovative cast-based digital fabrication, and advanced computationally designed architectural structures
Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in a functional fiber that monitors athlete dehydration by their sweat analysis
Francesco Baldini responsible of the Chemical & Biochemical Optical Sensor Group; Romeo Bernini (IREA)
A fluorescence-based optical platform for the simultaneous measurement up to four different biomarkers in serum or plasma samples has been developed; an optical chip with thirteen different channels is the heart of the instrument. Fluorescence detection is performed by means of the implementation of a sandwich assay with the secondary antibody properly labelled with a fluorophore. Attention was focused on procalcitonin (PCT), C-reactive protein (CRP), interleukin-6 and soluble urokinase plasminogen activator receptor (suPAR), with suPAR being considered in the last years as an important prognostic biomarker for sepsis. Two measurement campaigns have been carried out with the developed device at the Attikon University Hospital (Athens, Greece) and at Center for Sepsis Control and Care of the Universitätsklinikum Jena (Jena, Germany).
Francesco Baldini responsible of the Chemical & Biochemical Optical Sensor Group; Romeo Bernini (IREA)
Nanodem: an optical platform for multiple therapeutic drug monitoring in transplanted patients
Nutraceuticals that induce tolerance to wheat gluten, for the diet of at risk-subjects.
Piero Toscano, Leandro Rocchi, Riccardo Dainelli, Alessandro Matese, S. Filippo Di Gennaro
AgroSat combines digital technologies (IoT and Big Data) and scientific research products to create a collaboration platform that allows end-users to access, share, consult data – info – knowledge and plan actions. AgroSat is a full free open source platform and works from any web-browser and devices.
Robotics for Rehabilitation team
PLANarm2 is an end-effector-based parallel robot for neurorehabilitation. It allows the patient to practice planar movements of his hand, exploiting both elbow and shoulder movements. The movement of the manipulandum held by the patient is controlled by two motors. The device is equipped with two load cells to measure the force exchanged with the patient. Force-based and adaptive control algorithms enable the device to help the patient in performing rehabilitation tasks according to his capabilities and his level of impairment. A graphic environment proposes interactive and engaging tasks. The device has been designed to be clamped on one side of a table, also in a domestic environment. The modularity of the ROS-based control system will enable a straightforward integration of additional devices
Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in flexible porous polymer, used ina plantar sole for monitoring walking positions
From CNR: PhD. Antonello Bonfante, PhD Eugenia Monaco, PhD Piero Manna, Dr. Maurizio Buonanno, Dr. Andrea Esposito and Giovanni Cantilena From Israeli partner: Prof. Anna Brook, Dr. Keren Salinas, Emanuel Levitin, Ron Segal
LCIS DSS Project: an advanced Low Cost system for farm Irrigation Support
I.I.S.S. Calamatta di Civitavecchia
"i-Keel" is an innovative and advanced system for pleasure and competition sailboats, once installed, can increase their efficency, performances and maneuverability. This is an advanced system of tilting keel, retractable and intelligent bulb with azimuth propulsion. The group of makers is made up of the students of classes IVATTL and VC of the I.I.S.S. "Calamatta" Institut of Civitavecchia, under the supervision of the Tutor Professors Prof. Andrea Sciacca
Medaarch s.r.l. s.t.p
CAD is a center of excellence for training and consultancy on innovation issues, the only place in Italy dedicated to re-launching craft activities
Andrea GASPARRI, Renzo CARPIO, Jacopo MAIOLINI, Ciro POTENA, Giovanni ULIVI
PANTHEON is developing the agricultural equivalent of an industrial Supervisory Control And Data Acquisition (SCADA) system for the precision farming of hazelnut orchards.
IAS-Lab (Intelligent Autonomous Systems Laboratory), University of Padova
The SPIRIT project is a research project funded by the European Union which aims at developing a general inspection robot framework that takes the step from programming complex inspection tasks to configuring such tasks. This includes inspection tasks that use image-based sensors and require a continuous motion to fully scan a part’s surface. SPIRIT will substantially reduce the engineering costs when setting up inspection robots in industrial environments.
In his new video portrait series entitled, Solmi parodies the iconography of historical portraiture, creating his own absurd portraits of our most feared and beloved historic leaders.
We improve our living experience with respect for the environment: 4.0 housing built by integrating the most innovative construction techniques with 3D printing, using experimental materials with low environmental impact
David Massaroni e Liberati Simone
For years, Climax has been working in the field of education, education and the development of workshops suitable for students of all levels. We have always given great importance to the teaching methodology and we usually opt for the most innovative solutions that seek to stimulate curiosity in the student and that are at the same time capable of showing the charm of Science.
Prof. Paolo DeFilippis (Project Director), Prof. Fedora Quattrocchi (Scientific Manager), Ph.D. Francesco Napoli, Eng. Marco Grechi, Ph.D. Biagio Giorgio, BSc. Carmine Nolè
3D prototype of the hydrocarbon reservoir which, starting from the virtual 3D geological model, is physically realized by a special 3D printer
Andrea Chesi IIS Tito Sarrocchi Siena
The goal of the "leap - done" project is to pilot a complex system, such as a drone, using hand movement instead of a normal radio command. The sensor used to achieve this goal is a "leap motion" camera.
A fully-automated miniaturised photometric analyser for water monitoring featuring SLA 3D printed opto-fluidic components. Applications include environmental monitoring, hydroponic/aquaponic automation, industrial process control and much more.
Carmelo Occhipinti Federica Bertini Alessandro Marianantoni
Four masterpieces of Caravaggio, Raffaello and Correggio in tactile format for an experimental approach that bridges the gap between art and accessibility
Alex Braga, i professori Francesco Riganti Fulginei e Antonino Laudani dell' Università di Roma Tre
A-MINT, created by Alex Braga and professors Francesco Riganti Fulginei and Antonino Laudani of Roma Tre University is a versatile artificial intelligence software that works in real time with the musician for the musician to allow him to develop infinite creativity . A-MINT, in its Experience version, will be present as a "testable" installation at the next Maker Faire Rome 2019.
STUDENTI ITS MOBILITA' SOSTENIBILE TRASPORTI CATANIA
The picking management through augmented reality makes order preparation more fluid, reducing management costs
Massimo Barbaro, Paolo Meloni, Matteo Soccol, Antonio Perra, Silvia Loddo
ACUADORI is a distributed wireless sensor platform to accurately remotely measure the water stress level of vineyards.
Agenzia ICE Italian Trade & Investment Agency
ITA - Italian Trade Agency is the Governmental agency that supports the business development of our companies abroad and promotes the attraction of foreign inve …
A2 (pav. 6) - Agenzia ICE Italian Trade & Investment Agency
Agenzia Regionale Tecnologia Innovazione
Strategic Agency for Technology and Innovation of Apulia supports the regional government in designing and managing economic development, innovation, education, …
A huge amount of agricultural plastic waste invades the planet. The plastics of petroleum origin assume particular importance from the environmental point of view, which often do not proceed towards a rational process of treatment, collection, disposal and / or recovery. An ecological alternative is represented by our bio-spray, an aqueous solution based on polysaccharides, which generates a protective geo-membrane covering the ground, which after performing its function, turns into biomass, water, methane or anhydride carbon.
Isabella Pisano, Elena Ciani
Value chains designing applied to agro-industrial by-products is a innovative approach in order to increase social and environmental sustainability.
Andrea Bonarini, Matteo Matteucci, Francesco Amigoni
AI&Robotics Lab, established in 1973 at Politecnico di Milano. Autonomous robots and vehicles, AI, Machine Learning, Vision, Perception.
The Air Busters - IV B ITET “Rapisardi Da Vinci” - Caltanissetta
It provides real-time information on the polluting gases existing throughout the territory by surveys from mobile analysis stations.
Studenti della Classe 5AO AS 2018-2019 IIS Volterra-Elia Ancona
Home automation system for monitoring the quality of air at home and in classrooms. Temperature, Humidity, CO2, PM10, PM2.5, VOC
Alberto Bigazzi e gli studenti del Plinio.
Understanding air traffic control by Making a console showing available position data transmitted by airplanes captured through Software Defined Radio
Alan Advantage srl, with offices in Rome and Boston, is active for more than ten years in Innovation, deals with strategic consulting activities. The company …
Giuseppe Massaria, Antonio Idà
ALAN-2 is a tracked Robot for military use. It has GPS, supports automatic learning, autonomous navigation and the NAV function with which it is possible to give a mission. The ROS system combined with a Neural Network provide access to the A.I. It is equipped with a Smart Charging Station (custom).
Albicchiere Team: Massimo Mearini, Diego Pepini, Emanuele Pangrazi, Luigi Palumbo.
albicchiere is the smart wine dispenser that allows bringing the consumer experience to a higher level, serving them the best glass of wine: at the ideal temperature and always as if it were just opened.
Matteo Francavilla, Mauro Marone, Paolo Marasco, Massimo Monteleone
Upgrading of liquid waste (anaerobic digestate) to high quality culture medium for microalgae production and conversion in advanced bio-products and fuels.
MAURIZIO ESPOSITO, FABRIZIO MARIGNETTI, ERIKA OTTAVIANO, ALESSANDRA SANNELLA, GIUSEPPE TOMASSO
Our project is based on the idea that environmental and social sustainability are two faces of the same coin and that there are strong connections between technological innovation and social engineering.
It is a multimedia installation based on liminal linguistic research that combines the experimental use of virtual reality with electronic research music, 3D sculpture and performance in a concept with multiple metaphorical facets.
Ambasciata degli Stati Uniti d'America
October 19-20, 48-hours of hacking at NASA’s International Space Apps Challenge, the world’s largest global HACKATHON. NASA Space Apps engages thousands of …
Associazione Medici di Famiglia per l'Ambiente di Frosinone e Provincia - FabLab Frosinone APS
Ancler®: simple and inexpensive real-time atmospheric monitoring. An ethical project to safeguard health and the environment, against pollution.
Anna Frants (Russia–USA)
Installation, mixed media (metallic Conveyor Belt, 3D Print, Arduino, Hand-knitting), 2013
Odoardo Savo - Stefano Palone
Portable burglar alarm with rechargeable batteries that produces an alarm sound when any door and window is opened in your room or apartment.
British Interplanetary Society
Set of practical activities designed to introduce about Apollo lunar missions in an funny and engaging way.
A desk with illustrative material of our company, possibility to have fun with interactive gamification paths about circular economy, vision of our conference show, BLUE REVOLUTION, on the tv.
Raffaele Settanni, Danila Chiapperini
ApuliaKundi deals with research on microalgae, produces organic, natural, pure and Made in Italy SpirulinaK, promotes scientific dissemination
Colegiu Tehnic Gheorghe Cartianu, grades 9-12
Main objective: the development of technological education in order to have well-prepared students which can be capable to master and efficiently explore the new technologies.
Arrow Electronics Italia s.r.l.
Arrow is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. …
Massimo Ruffolo, Ermelinda Oro, Fausto Pupo, Umberto Scilinguo, Francesco Visalli
This project shows how artificial intelligence helps in automating boring and repetitive tasks that usually require human cognitive skills in order to enable persons to focus on more strategic tasks
Association Nobilita has as its objective to put into practice ideas that can bring work. We are convinced that work is an instrument to dignify and Associatio …
Unione Astrofili Italiani
Crafting, passion and astronomy knowledge applied to astronomy popularization and inclusion, because everyone has the right to “see the stars”
Sistema di Realtà Aumentata per la manutenzione predittiva in ambito Industria 4.0
Andrea Motroni; Fabio Bernardini
AURORIS aims at inventorying and locating things or people using RFID technology with high accuracy and in real time.
The project will demonstrate robotic vision applied to driverless robots and cars, and to robots for precision farming.
Odoardo Savo - Stefano Palone
Smart autotracking 360° camera
Dott. Francesco Maria Bucarelli, Dott. Giacomo Peroni, Dott.ssa Cristiana Cireddu
"black garlic" means a processed product obtained by prolonged heat treatment of fresh garlic.
Sara Castria, Lorenzo Rattalino, Alessia Remondino, Roberto Romanazzo, Giada Zanti, Giulia Lamarca, Federico Chiumento (Tutor), Gaia Marchetti (Tutor)
An invention with which people in a weelchair can carry easily a newborn.
Alberto Marzaioli" Balance Bike - A wooden bike for children aged 2 to 6, which allows them to develop balance and fine motor skills. The project has no commercial purposes and has been developed for scientific / educational purposes ( Duryng the Fab Academy 2019 cycle ). The project can be downloaded for Free and replicated in any other part of the World ( FabCloud archive ).
Walter Setti, Monica Gori
Novel technological solutions for the learning of mathematical concepts in primary schools and for the training of cognitive skills
Studenti e laureandi che operano nel Laboratorio di Oleodinamica e Pneumatica del Dipartimento di Ingegneria – Sezione Meccanica
A test-bed has been set up to carry out experimental activities on multiphase flows. The facility is based on a modular architecture, thanks to which the various functions such as the electric drive, the thermal conditioning and the filtration of the fluid, the high-pressure circuit and the test sections are inter-connected in a single structure. The management of the automatic functions of the bench has been implemented on open hardware (Arduino UNO).
Giovanni Bernardini, Massimo Gennaretti, Jacopo Serafini, Valerio Vezzari
Robotized test bench equipped with structural monitoring FBG fiber optics sensors , dedicated to real time structural characterization of aeronautical parts.
Solution for mobility is the ability to move independently in familiar and unknown environments with maximum safety and minimum effort.
Alunni e Docenti ITTS "E. Scalfaro" Catanzaro
The "Bee LabSat" didactic satellite, excluding the solar panel and the microcontroller, was created by extracting, testing and then using electronic devices from old computers and mobile phones. Bee LabSat is therefore the demonstration of how to carry out valid experiments and / or prototypes, learning to recycle components from obsolete or malfunctioning equipment.
The BeeBlockers - IV B e V B - ITET “Rapisardi Da Vinci” - Caltanissetta
Interchangeable teaching modules for the realization of electronic devices programmable in visual language to learn the "Coding" at school, while having fun.
Daniele Valentini, Vincenzo Mulone, Leonardo Mascarino
A 400W Wind Turbine that you can take with you anywhere. Light, easily assembled and efficient.
Corso di Elettronica-Automazione I.I.S. “Rita Levi-Montalcini” Acqui Terme (AL)
Open source and low cost devices for blind people: Voice synthesizer connectable to everyday use equipment.
Biomechatronics Laboratory, University ‘Magna Graecia’ of Catanzaro , ITALY
Early-Warning system for driver safety based on low-cost LIDAR and embedded control technologies
Smart Mobility Solutions S.r.l.
BikerTop®: World’s First Pop-Up Shield Cover for Bikes. A groundbreaking system that protects cyclists from rain and wind. The cover pops open from the handlebar in just a few seconds, providing a shelter from the rain during journeys.
BIOVOICES, Biobridges, STAR-ProBio, LIFT, EuBioNet
The BIOECONOMY Village aims to raise awareness, improve knowledge on products of renewable origin and promote the applications and benefits of the Bioeconomy, circular economy and sustainability, encouraging dialogue, discussion and sharing between the general public and representatives of universities, research centers, projects, companies, associations and start-ups.
Studenti frequentanti le quarte classi indirizzo Biotecnologia. KA2 Erasmus plus school project: Be a maker @ school, IIS Galileo Galilei, Jesi (AN)
Using 3D printers to produce molecular biology laboratory techniques to schools by using the tools created by students.
Simone Cardillo, Vincenzo Gerardi, Emiliano Sacchetti, Alessandro Del Signore, Riccardo Placitelli, Lorenzo Conti, Davide Fiore.
NANO© by BioPile is an automatic indoor growing device. It can grow many king of vegetables and plants by a patented technology and a research lever software. It also recycle water and filters Co2 constantly.
Prof. Antonio ZUORRO
Biorefineries 4.0 to demonstrate practically how to turn agroindustrial wastes into value added products such as cosmetics and nutraceuticals. Bioeconomy starts by a circular approach in food sector.
Blue_Boost Project - ADRION Programme
Blue_Boost project - ADRION Programme – brings together 7 partners from Italy (University of Camerino – Marche; Central Europe Initiative - Friuli Venezia G …
Boboto promotes Montessori pedagogy through the production of materials with new technologies, and coding and the concept of digital citizenship through workshops that encourage the active and conscious use of new technologies.
Il progetto è stato realizzato da un team distudenti e docenti della Fondazione ITS Steve Jobs in collaborazione con Paradigma soc. coop con sede a Catania
Since 1953, vending machines continue to function in the same way. Boox offers an advantageous experience for both users and sellers
MARCO BARUZZO, CARLO FONDA, SARA SOSSI, GAYA FIOR, ERIKA RONCHIN, ENRIQUE CANESSA
Our Bora simulator has three powerful electric fans (normally used for big inflatable structures) producing a strong airflow, controlled by Arduino and some sensors, to recreate the effect of Trieste's Bora wind and its blasts. You can choose between "Light Bora" or "Dark Bora" (i.e. mixed with rain). The simulator is contained within a structure reproducing a classical view of Trieste, and the Bora wind is blowing from a window.
Michelangelo Bornò, Franco Ferrini
Robotic arm, with six (6) degrees of freedom, made with a new type of 'back-lash free' articulation.
Brunetti Fabio, Calandrin Marco, Nardin Andrea, Virzi Gabriele, Pasqualotto Giulio
With this project we aim to create a new way of managing and designing buildings, exploiting the new 4.0 technologies such as augmented reality and IOT (internet of things).
Camillia is a "Hack" of the "Lampan" lamp by IKEA. The change allows it to become a RGB lamp with the particularity, in addition to the more classic functions, of being able to change the color of the light emitted to make it homogeneous with the color of the surface on which it is placed.
cristiana luisa marconcini, rita audino, giorgia pietraforte e valentina pietraforte
the ns. project consists in using waste material and recycling it, we use fabric, shirts, sheets, curtains, pillowcases ect ...... reinventing other products for everyday use
CampuStore brings new ideas and visions at Maker Faire Rome, again: close to the Kids Area organized by Codemotion Kids!, CampuStore takes part to the exhibitio …
The production activity consists in processing the hemp straws harvested from the agricultural supply chains to be transformed into the two constituent parts: the shives (wood internal part) and the technical fiber (short) that will be used for different industrial applications. Our goal is to relaunch the agricultural and industrial chain of hemp on the Italian territory and in particular in the south, thus creating a great opportunity for young farmers and entrepreneurs who, instead of having to leave the wonderful regions of Southern Italy in search of work, can achieve something concrete and innovative in their own land.
ANDREA BELLI, ALEXIA, DAVIDE, FILIPPO
A prototype patented economical electrical trolley capable of climb steps and stairs also for transport persons
Classe 4L ITIS "Enrico Fermi" Roma. CARRELLOMATIC
Our project is called “Carrellomatic”, it is an automated shopping cart that provides a substantial help to people who find difficult during the spending’s transport.
Center of Excellence DEWS - University of L'Aquila
Research Center - University of L'Aquila
B37 (pav. 9) - Center of Excellence DEWS - University of L'Aquila
Corrado Costa, Simone Vasta, Francesca Antonucci, Francesco Tocci
LoRa based on open source technology for precision irrigation and remote field traffic
CHEF, an innovative, compact, sterile, fully computerized hydroponic Vertical Farm, for healthy and clean cultivations at 0Km.
Gruppo Chicken Counter
Explore with the children the world of numbers and the beauty of mathematics, stimulating emotions and interest, through a challenge between two opponents who will compete in increasingly difficult and complex levels.
Creation of a wearable chemical device, designed for sweat collection and chemical analysis for monitoring and diagnosing patients’ or sportsmen’ s health.
Chokkino is the first cacao espresso, the functional beverage made with pure cacao, the perfect alternative to coffee!
Daniele Dell'Orco / Flavia Lombardi
Cacao Crudo is a new way to produce and savour chocolate. To preserve the precious qualities of the cacao and the other ingredients we are constantly seeking new production methods and new ways to enjoy it. Cacao Crudo is the supply chain we want!!
Bar made from flour rich in protein and high in fiber, with spirulina seaweed cream and almond cream with dark chocolate coating
The analysis of synergies (muscular and kinematic) is a cutting-edge method for the study of motor control of healthy subjects with motor disabilities. The method is based on the concept that the central nervous system coordinates muscles and joints according to predefined schemes that simplify the ability to perform complex movements. Both in laboratory and in clinical settings, synergies are calculated through the use of special sensors and instrumentation. Synergy Lab presents some applications in the muscular field related to the upper limb and muscle-kinematics related to the use of the hand for grasping. Furthermore, Synergy Lab will present an application based on a Kinect V2 commercial sensor that allows synergies to be applied even with low-cost technologies, in various contexts
Codemotion Kids! is one of the most important references in Italy about the technological education for young people. The headquarters of the School of Technology and Creativity is in Rome, where the yearly workshops, Saturday Tech and AdaLabs, are taking place, during which the young participants use coding, robotics, electronics and design to create and give life to their ideas. Come and discover our activities 2019-2020!
Prof. GUENDALINA GRAFFINGNA
Engaging patients in their heathlcare and wellbeing: the PHE-S (Patient Health Engagement Scale) and its possible applications in the digital health era
qbrobotics designed a new advanced anthropomorphic robotic hand based on soft-robotics technology (qb SoftHand Industry) for industrial tasks.
Compressions Houses are three different sculptures (3D printing, 2015) coming from the animation Time Bomb the Love (1997/98) which is a digital manipulation of rockets to the rhythm of techno music. Frame by frame, the missiles turn into very acid and synthetic-minimalist architectures I titled Compressions-Houses inspired by Newton Cenotaph. Through vertical-horizontal movements, the rockets disappear in straight lines and points, reappearing under the guise of defused bombs because transformed into architectures.
AETERE'S - Andrea Amato, Roberto Amato, Roberto Zucchelli
AEtere's technology works on the condensation of the electromagnetic energy due to the steady increase of high frequency technology that taints the electric network creating a new kind of pollution named Dirty Electricity
Conrad Electronic Shop
GIVE LIFE TO YOUR IDEAS Every invention begins with an idea, with a precise image that buzzes in your head, insists and wants to be realized. This is what give …
Associazione Promozione Sociale SalvaiCiclistiRoma
A low cost device to monitor biker, pedestrian and runner traffic along a cycle path. A tool helping citizens to call pubblic officers and politicians attention to their needs.
Jasmin Velagic, Nermin Covic
The control system for both remote and autonomous controls of a hexapod robot is developed.
Cubbit | M.Moschettini, S.Onofri, A.Cillario, L.Posani
Let’s recycle the internet we waste to create a green & encrypted cloud that is forever-free for its users!
Daniele Loddo & FabLab Ostia
Cucciamatic takes care of the management of our dog and is able to: -Provide the right ammount of water and food, during the hours set by the owner; -Control our dog with a webcam via the Internet; -Provide a resting place with the right temperature for the dog.
Riverview High School, Science 10, Physics 12
Students design, solder and 3D print lights and distribute students who are living in light poverty. @TeachSDG Education and Energy.
Studenti della classe 4C (coordinati dai Prof. Roberta D'Agostino e Daniele Impellizzeri) - Istituto Tecnico Agrario “Giuseppe Garibaldi” Roma
Cyber Healthy Farm is an IOT, modular, extensible, portable, cost-effective and eco-sustainable system that automates the cultivation and irrigation systems of a farm.
Estrazione del lattosio da siero di latte per la produzione di bioplastiche 100% biodegradabili verso un' industria smart e sostenibile
Katelab. Anna Zaniboni, Marina Bonsi, Pamela Sambri, Francesco Gurioli
Katelab deals with investigating needs, designing, prototype and create collaborative furnishings that can act as rehabilitating elements
Timothy Frégeau, Elena Panciroli, Oriane Anita Rainero, Giorgio Ratti, Natali Ristovska
A musical instrument that allows children with motor disabilities to learn, produce music and play alongside other people.
The objective of the project is to create a prototype capable of acquiring the moisture data from the soil and independently managing the quantity of water to be supplied to the soil to prevent the affected plant from going into water stress
DIAG Robotics Laboratory - Sapienza Università di Roma
Research activities at the DIAG Robotics Laboratory, Sapienza University of Rome.
Marcello Bonfè, Emiliano Mucchi, Federico Contro, Alessio Sozzi
Collaborative robotics for industrial production monitoring, diagnosis and quality control, integrating advanced noise and vibration analysis techniques.
Digi-Key è una società americana, di proprietà privata, con 3500 dipendenti in tutto il mondo e un fatturato totale di 2,3 miliardi $ all'anno. Da un unico p …
Bruno Siciliano, Luigi Villani
The projects aim to promote robotic technologies for agile manufacturing and for inspection and maintenance among the European SME's
Elio Romano, Alex Filisetti, Annamaria Stellari
This project is part of a broader research project concerning precision agriculture, that is, that set of techniques that allows reducing the use of inputs in agriculture (water, fertilizers, plant protection products, labor, processing, etc.) while increasing yields thanks to intelligent systems that, monitoring the environmental conditions, provide information and early warnings to farmers who will be able to intervene more effectively and in a targeted manner, gradually abandoning the rigid patterns of the past.
Simon Jeger, Marc Rauch, Moritz Reinders, Marvin Harms, Max Berger, Noah Kaufmann, Friedrich Rockenbauer, Libert Beltràn
Fixed wing aircraft that can not only fly but also dive into water, swim and emerge again through the surface.
Marco Baruzzo, Carlo Fonda, Sara Sossi, Gaya Fior, Erika Ronchin, Enrique Canessa
This DIY "Cloud Chamber" makes visible to the naked eyes a number of tracks of elementary particles like electrons, protons and muons.
Silvia Di Anselmo
Materials do it yourself is a kit dedicated to the children, with the aim of developing in children the awareness of the processes of work that lie behind the objects of our daily life.
Memento is a design-oriented desk with simple and elegant lines that represent a timeless icon. The idea behind this product is to stimulate the appeal of the product by focusing on the emotional value of the object, enhancing its sensory and material expressiveness through the five senses and highlighting their physical interaction with the surrounding environment without the help of advanced technologies but focusing entirely on the human experience.
Doc Creativity Soc. Coop.
Doc Creativity is the cooperative in Doc network which addresses all freelances of creative sectors, always seizing the processes of evolution and ibridation th …
Leonardo Crini, Michele Meattini, Francesco Ridoni, Francesco Ferranti
Domotech is a system that allows you to make your electrical system domotic in a very trivial and simple way.
ENEA - Laboratorio di robotica IDRA
ENEA is developing applications aimed at the energy saving under the frame of the italian Economy Ministry program "Ricerca di Sistema Elettrico" to support citizens in domestic environments and check external heat losses by RPAS
The state-of-the-art robotics and AI education and research platform designed to enable the makers of the next generations of autonomy.
Belt drive system for pedal assisted cycles
Gymnasium Vukovar, Junior class (17 and 18 years of age), second team
Our seismograph will be able to track and send all the data in real time from the accelerometer to the microcontroller Genuine Arduino MKR 1000 wifi. The collected data readings are sent to the Internet through always active Blynk server ( http://blynk2.croatianmakers.hr ), of the Institute for Youth Development and Innovativity (IRIM).
Del Vecchio Gianluca- Daniele Leone classe IV AE - ITIS " G.Galilei"_IIS Pontecorvo
All the space in a small space. Suitcase suitcase with vacuum compartment, GPS and digital scale
EasyEM: M. Bulgarelli, W. Falzoni, G. Angelini
Do it simple.... with the sweatshirt you close with one hand.
Nicola Rossi, Fabio Roveti
e•fló a bracelet with invisible technology, alerting children away !! Thanks to a slight vibration.
CRISALIDE DESIGN SPACE
Egg-O is a wearable cradle, born by a social project, to give a chance to all mums and children ,running away from war bombing or natural disaster, to move easily and fast, being protected by day and providing comfort to rest by night
The objective of the project was the realization of a monitoring and control device capable of self-feeding exploiting the energy resources of the surrounding environment.
Elena Gubanova & Ivan Govorkov (Russia, CYLAND Media Art Lab)
kinetic interactive installation
EMC Elettronica Srl
Elettronica Open Source is a blog born in 2006 with the aim of spreading quality articles and allowing the exchange of ideas and experiences between electronics …
Team EmotionWear: Sara Savian, Alessadra Trestini, Mauro Alfieri
Emotionwear is a fashion tech collection made with digital fabrication in a fablab featuring wearable devices expressing the wearer emotions.
Fabio Algieri, Gabriele Cantino, Nicolò Castagnoli, Erik Giordanetto, Giovanni Lipari, Lorenzo Ogliara, Loris Salomone
System to impose rotations of attitude and orbit of small satellites (CubeSat) for their effective testing in a terrestrial Lab.
innovation, 3dprint, interactivity, interaction design, visual art, profume, arduino, raspberry, essential oil, fragrance, technology, hybrid, premiere, smartphone, image, color, percentage, multimedia, led, art
Alessandro Cammerata, Roberto Mortaro, Luigi Benedetti, Simone Figorilli, Paolo Menesatti
A solar-powered “pasta dryer” managed the IoT technology.
Fondazione EAT ITS Grosseto
The project was born from the experiences of internships of young people gained last year, where they experimented with numerous work experiences in the company, understanding their needs and opportunities that could be achieved thanks to the use of technology. The result was the partnership with the organic company "La Selva" with the aim of creating a label compatible with augmented reality technologies that would allow us to overcome the "regulatory" and physical limits of current labels, adding useful information such as supply chain and other informative and promotional contents.
Loris Ferro, Luigi Cabaletti, Vladimir Bellomi
EV.tre is a smart wallbox for EV charges with dynamic current regulation according to the real time power consumption of domestic loads. The power absorbed remains always within the max output power of the power meter so the protection circuit breaker will never be unforeseen activated, granting a safe and optimized charge of your EV.
Nyíregyháza Center of Vocational Centre Bánki Donát Polytechnical School and Dormitory Krúdy Gyula HighSchool
The aim of the project is to develop an inexpensive tool and build a concentration of PM.
A project between art and science, tradition and innovation, time and space.
With Evolving Virtual Room, you enter paintings and works of art from every era, immovable sculptures and exhibits materialize and become interactive in the middle of the room.
Sergei Komarov, Alexei Grachev
Exaltation interactive installation, 2019 iPhone, monitor 16:9, PC, Instagram live stream Supported by CYLAND Media Art Lab The basis of the project is live streaming. It takes place on the social network Instagram account that it looks for itself but gives many ways of interaction with visitors.
What future without plastic? What are the most promising research in this sense and which are possible? These are just some of the questions that will guide the Experiment it section proposed by Sapienza University of Rome with Saperi & Co at the Maker Faire in Rome.
Sapienza Università di Roma - Saperi&Co
Sapienza Università di Roma attends the Maker Faire 2019 - with the coordination of Saperi&Co. research and service infrastructure of the Sapienza University of Rome, whose aim is to promote outstanding applied research and to support innovation , with 18 related Departments, 4 lab on demand, a Fab Lab, a Workshop, a Coworking and a Training area, will open in October 2019. The theme chosen is "Experiment it - Do it - Play it", to talk about applied research topics with a high rate of innovation that Sapienza expresses in various fields and disciplines, from research up to the realization of real and true own products.
Team: Idealizer: Weslley Lioba Caldas Coordinator: José Gleisson da Costa Germano Advisor: Sandro Costa Mesquita Researcher: Tiago Diógenes de Araújo
The project consists in a glasses for visually impaired with the objective of aid the user's displacement,giving a better independence.
Credits Jie Zhang, Architect and General Manager at Pelli Clarke Pelli Architects Raffi Tchakerian, Assistant Professor at Dubai Institute of Design and Innovation (DIDI) Sayjel Vijay Patel, Assistant Professor at Dubai Institute of Design and Innova
Eyemotion interprets emotions from the facial expressions of people as new environmental factors that are manifested through a shifting display of colour and form as corollaries to a spectrum of psychological states, as either reinforcement or intervention.
The FabTrolley is a suitcase addressed to a regular traveler, lover of nature and outdoor travel. It is also suitable for the professional who travels frequently, and who does not want to give up a soft bed to rest a few hours at the airport, waiting for the next flight.
Fabrizio Di Vittorio
VGA Controller, PS/2 Mouse and Keyboard Controller, Graphics Library, Game Engine and ANSI/VT Terminal for the ESP32
Associazione Verona FabLab
The FabVan (Fabrication Van) is a mobile experimental laboratory for social innovation provided for the local community.
The common rear lights for cars use areas defined for the various visualizations, in this project with the use of multicolor lighting elements the various areas of a rear light can take any color, optimizing its use.
Fondazione Mondo Digitale
Fashion Digital Night is the initiative, promoted by the Fondazione Mondo Digitale, with the aim of accelerating the digital transformation of the fashion sector and developing new skills and professional profiles among young people.
uno@uno makes simplicity and "zero annoyance" its own high road. Easy easy recycling. Citizens are assigned a personal code, also reported on special adhesive labels, differently colored according to the type of waste. By putting the right label on a common bag you will have a correct differentiation and you will receive discounts on your bill. uno@uno can also be applied using old street bins, without any new investment and without new costs, freeing citizens from annoying weekly calendars. In municipalities, one @ one the waste management spending decreases, both for the administration and for those of families.
Marco Faimali, Nicoletta Nesto, Fantina Madricardo, Fedra Francocci
Plastic and its multiple uses have changed our lives in just a few years. Yet the use we make of it has caused a heavy pollution of the places we live in up to compromising our environment and having repercussions on our health. Communicating the new technologies, materials and uses we can do to create a dialogue aimed at finding solutions.
Federica Caruso, Serpil Erdönmez, Lara Ferruccio, Martina Spinelli, Marco Bencivenga
A pair of glove that allows children with dyscalculia to learn, understand and memorize math, in particular, the table numbers.
Be-Team another amazing project by yu-scan Ltd
Taking your EEG brain signals and its up to you to make a storm. Or maybe destroy your opposition. Come play.
Rechargeable and with multiple light sources. That's the real multifunction pocket torch to travel around safely in the city jungle.
Fondazione Bruno Kessler
FBK is a public research Institute in Italy, ranked at the top places for scientific excellence within different subject areas, like ICT, microelectronics, hist …
Paolo Roselli, Jean Vanderdonckt, Lorenzo Luzzi, Nathan Magrofuoco
Shapes of triangles are quantified. Distance between shapes is computed. Decomposing gestures into triangles allows to recognize gestures.
EXHIBIT SMALL AND MONUMENTAL WORKS OF ART THROUGH INNOVATIVE AS3D VISUAL SUPPORTS * IN ORDER TO APPROACH AND DISCOVER THE HISTORICAL ARTISTIC HERITAGE FROM OUR DAYS TO THE PUBLIC, IN PARTICULAR THE ITALIAN HERITAGE, ORGANIZING ITINERARY TOPICS OF INTERNATIONAL BREATH AND IMPACT VISUAL AND EMOTIONAL
The maker community from aachen presents some of their projects, e.g. enlighten art, done with LEDs and lasercutter, 3D printer etc. as well es some usefull projects for people with impairment.
Antonio Di Giovanni
Funghi Espresso is an innovative startup, which produces fresh mushrooms in a sustainable and natural way, using the coffee grounds from the bars and restaurants of the territory as a substrate for the cultivation. In addition to the production of fresh mushrooms, Funghi Espresso is specialized in the production of substrate ready for mushroom cultivation (kit).
Gianluca Ciuffreda, Alessandro De luca
Let's have fun while learning electronics and building smart devices ! Programmable electronic boards in assembling kit, equipped with schematics, components and instructions so that users can have fun while learning electronics.
Michele Maris (INAF - Osservatorio Astronomico di Trieste)
Boiled or Frozen? Answering this question is the first step in finding life on other worlds.
Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
Gemini is a smart DC motors controller for application that requires constant speed.
Filippo Giannetti (Unversità di Pisa), Antonio Colicelli (Unversità di Pisa), Marco Moretti (Unversità di Pisa), Ruggero Reggiannini (Unversità di Pisa) in collaboration with MBI Srl Pisa and CNR-IBE Firenze.
Crafty exploitation of satellite tv signals to get accurate and capillary real-time measurement of rainfall intensity.
The Giant Breadboard is meant to acquire knowledge and understanding about basic electronic principles and facts and to train skills in breadboard prototyping in a playful way.
The GrassRoller is a mechanical device in which a roll of grass moves over the participant’s body. The machine consists of an horizontal platform, an aluminium structure and a 6 feet wooden roller covered with a layer of lawn activated by an hand-crank activated mechanism. The participant lies on the aluminum bench and upon pushing a lever, waits for the roller to slide upon his body. The uncanny experience lasts for about 3 seconds. This Rube Goldberg machine-like contraption plays with irony on the ambiguous relationship between human and his environment: a contraption whose only purpose is to evenly, relentlessly roll green turf over your body. This contraption, so predominant and grand in its scale, evokes fear and a potential of bliss that resemble the legacy of the bachelor machines: from Kafka’s “In The Penal Colony”, via Raymond Roussel, and Duchamp to Tinguely.
Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems
Valerio Joe Utzeri; Anisa Ribani; Samuele Bovo
GRIFFA controls food DNA using innovative technologies and algorithms by detecting ingredients, allergens and pathogens in food.
Francesco Rodighiero (Tutor), Ludovico Russo (Sviluppo Software ed Elettronica), Alessio Crivelli (progettazione 3D e Hardware), Teo Bistoni (Supporto programmazione), Daniela Meroni (Organizzazione, supporto sviluppo e collaudo), Rossella Indaco (Support
A tactile map of Italy presents buttons for each region. When the buttons are pressed, audio tracks are reproduced that describe various aspects of the region.
HAELLO is an open innovation project around wearable technologies in artistic disciplines that involve the use of the body and data, both physical and biological, produced by it.
Manuel Dadda, Stefano Picco, Andrea Zoli
Drone used in case of eathquake, take photos to buildings, show probability to find people trapped thanks to artificial intelligence.
Hoist Finance is a trusted debt restructuring partner to international banks and financial institutions. We are specialised in serving banks in handling non-per …
Fondazione Mondo Digitale
The European Holomakers project approaches high school students to the study of STEM subjects, thanks to new teaching methods, such as the creation of holograms and the processing of virtual images.
Laboratorio Biotecnologie - Divisione Biotecnologie e Agroindustria ENEA
Protected HORTiculture resistant to EXTREME conditions, for the production of high nutritional value plants: a field experiment in the AMADEE-18 mission
TheEngineRoom/EMAROlab, Università di Genova
HRI++ aims at showcasing possible, futuristic human-robot interaction modes.
Wearable robotic and haptic devices, applications in rehabilitation and patient assistance, virtual and augmented reality, robot teleoperation.
Roberto Ricci - Biosearch Ambiente S.r.l., Prof. Alessandro Piccolo - Università Federico II di Napoli
From organic waste we can produce humic acids (HA) suitable for environmental remediation or for agricultural use.
HURBA is the first true electric scooter in Italy with a removable battery. HURBA has also patented an innovative battery that recharges in 12 minutes and lasts 120 years.
Giorgio Bernardini, Alberto Conte, Luca De Ponti, Tommaso Pa
Hydrocarbot can purify water from oily substances(oil, fuel, diesel...) making them reusable.
Prof. Vincenzo Lippiello
Hyfliers è un progetto Europeo H2020 per lo sviluppo di un drone dotato di base mobile e un braccio robotico per ispezionare condutture in raffinerie e impianti chimici.
I scream for Gelato - Italian stories about Food Design showcases a selection of products from ADI Design Index and 14 gelatos made in Lazio.
TELEX COLLECTOR GROUP
The Teleprinter world and its old network as it was yesterday and how we bring it back to life in today's Internet era. It is possible to chat with a teleprinter made in the 50's and connected to a network of collectors around the world from Australia to Europe or Canada or you can punch your name on a punched tape. You can send an email to an old telex machine and see how it prints it.
ISTITUTO TECNICO TECNOLOGICO "L. DA VINCI" DI VITERBO CLASSE: 3^B ad indirizzo Informatica e Telecomunicazioni (articolazione INFORMATICA)
The Intelligent Baby Pillow is an electronic device finalized to prevent the accidental abandonment of children alone in the car.
Cultural Heritage lab, Engineering Ingegneria informatica
IDEHA is a project dedicated to the creation of a system for the management and fruition of the Italian cultural heritage.
Alessio Saccoccio, Carlo Muzi, Alessandro Cinelli
Idroluppolo is the innovative process that overcomes the critical issues of hop’s production throught our hydroponc technology.
IED Istituto Europeo di Design SpA
Istituto Europeo di Design was founded in 1966, product of the remarkable vision of Francesco Morelli. Today IED is the only Higher Education Institution in the …
Giorgio Maracchioni, Arellano Munoz Jimmy Alexander,Torri Federica, Piermaria Alessio, Brogini Ginevra
iFew (interactive Future Effectiveness Water): smart bottle that exchanges cloud data with iFewApp, provide mineral blends customized to individual needs
Il Brevetto - Giornale delle Invenzioni
The “Genius” is the main theme of the magazine “The Patent”, the curiosity and passion for innovation are the values of an editorial staff that was born …
Emiliano gatti, Gianluca Meola
The first educational robotics kit on Leonardo da Vinci, a kit to learn Leonardo's history and inventions in a technological key, training logic and developing problem-solving skills in kids.
Distori Heritage – UNIVPM
Dissemination and safeguard of Cultural Heritage through perfect Facsimiles and Mixed Reality: the new challenge of Digital Documentation.
Associazione Creanatura - Wps multimedia
THE DESCENDER OF EARTH The Descender of Earth is a multimedial traveling experience of Natural History. The fantastic travel agency Volvola, the captain and all his crew will lead you in an educational travel toward the center of the Earth. Traveling by the Underground 0, a descender vehicle, able to cross all the layers of the planet and push itself until the center of the Earth and further.
Dipartimento di Architettura, Università Roma Tre; Coordinamento Prof. Stefano Converso, con V. De Ferraro, Studenti del corso di Tecniche Parametriche di Progettazione
Open Source Parks in Rome: bottom up maintenance, “Open” digital projects, produced in Fab Labs, and installed for free interaction.
Gli studenti del corso ITS per “Tecnico superiore della produzione, qualità ed innovazione nel Sistema moda” e l’azienda “Vanessa Creazioni” di Monte Urano
Eco-friendly recyclable shoe. Upper in vegetal fabric: cotton, hemp, ... Thermoplastic polyurethane bottom made of renewable organic material.
The Rome Technology Park System offers companies, medium, small and large, and start-up in the start-up and growth phases, spaces equipped to carry out activities with a high technological and innovative content, for the design and implementation of new ideas, new products and services, in an environment strongly oriented towards collaboration and networking.
D20 (pav. 7) - Tecnopolo
Will presents a range of products designed for lighting industry and complex architectural scenery: Wire Controllers and Wifi Floodlights
Luciano Teresi, Beatrice Beco, Gianclaudio Petrazzini, Federica Fino, Raffaele Carbone, Fabrizio Anella, Angeloni Sabina, Lucio Zaccardelli, Valeria Cinelli
Experimenting mathematics with the applications of IMAGINARY.org, made to explore and interact with mathematics.
Pallottino F, Figorilli S, Menesatti P, Scarfone A.
Pilot plants based on rims technology (Recirculating Infusion Mash Systems) and temperature pid management for research & development in the brewing and distillates chains.
Classe 5 C anno scolastico 2018-2019 - I.I.S. Amedeo Avogadro di Abbadia San Salvatore
Mixing plant controlled by PLC and equipped with conveyor belt. The mixing plant allows to carry by means of a conveyor belt an empty container from the stock of containers to a load cell. In the load area the container is filled with liquids contained within two tanks until it has reached the maximum weight fixed in the PLC program. When it gets filled, the recipient is carried from the load area to the area in which an operator can pick up it.
Caris, ateneo dell’università di Roma Tor Vergata per l’inclusione- referente Prof Pier Gianni Medaglia ImpReading Software – referente Elena Imperiali CEO
ImpReading the new study methodology created for dyslexics and suitable for everyone. Read with ImpReading Font study with ImpReading App
Paolo Merialdo, Donatella Firmani
The project aims at building a Knowledge Graph extracting facts from medieval manuscripts.
INBOTS project brings together experts from different disciplines and European countries involved in the understanding and acceptance of Interactive Robotics.
Objective of the project: development of an Industrial IoT solution able to estimate the deformations and therefore the stress of the wind turbines in order to maximize the residual life cycle and optimize the production capacity.
Industrial electronic regeneration: The Circular Economy makes possible to reduce the time and costs of plant downtime.
Raffaele Ferrante, CEO. Daniele Bianchi, CTO. Marco Mannisi CPO.
Low-cost personalised custom-made foot orthotics using IoT and 3D printing
Agenzia Regionale per lo Sviluppo e l’Innovazione dell’Agricoltura del Lazio (ARSIAL), Ente di diritto pubblico, strumentale della Regione, istituito nel 1995 (LL.RR. 2/95 e 15/2003, aggiornate al luglio 2014, L.R. 7/14).
Protection of indigenous animal and plant resources at risk of genetic erosion through the L.R. n. 15/2000 managed by Arsial
The innovative Mag Spark technology produces electricity by exploiting low pressures using Green gaseous vectors Mag Spark is effective in cutting costs with new concepts for building and upgrading existing systems in the Green sector of already known systems In addition, the high reliability of Mag Spark technology makes maintenance costs intangible
Arduino Solar Tracker, a fast and efficient project to safeguard the environment. Solar tracker is not only easy to use but is also inexpensive.
Maria Buoncristiano, Luciano Florio e Donato Manta
The project aims at making Braille known and promoting it by making it become every child's heritage.
Matteo Bianchi, Manolo Garabini, Lucia Pallottino, Vincenzo Ferrari, Carmelo De Maria, Alessandro Tognetti
Solutions for assistive and medical applications, autonomous, mobile and industrial robotics, and advanced human-machine interaction
Eugenio Sabatella e Massimo Marini
IoT network for critical infrastructures and earthquake monitoring system
Marco Ronchetti, Tiziano Lattisi, Hyeon Kyeong Hwang
Multimedia Recording box is IoT based solution that transforms lectures into digital canvas where students can annotate, collaborate and review.
ISTITUTO NAZIONALE PER L'ASSICURAZIONE CONTRO GLI INFORTUNI SUL LAVORO
Inail is a non-economic public body that has expanded its functions in recent years and gradually changed its role within the Italian welfare system, increasing …
B1 (pav. 9) - ISTITUTO NAZIONALE PER L'ASSICURAZIONE CONTRO GLI INFORTUNI SUL LAVORO
Cod.Act (André Décosterd + Michel Décosterd)
πTon is an intriguing sound installation; it constitutes a new stage in the Cod.Act researches on plastic and sound organicity. It results from an experiment on the relation between the distortion of an elastic structure and a real time human voice synthesis.
An international collaboration between U.S. based artist/activist, Joseph DeLappe and Scotland-based artists and game developers, Malath Abbas, Tom Demajo and Albert Elwin of Biome Collective.
Killbox is an online game and interactive installation that critically explores the nature of drone warfare, its complexities and consequences.
Fondazione Mondo Digitale
Kit:Cut is ambitious research project promoted by Fondazione Mondo Digitale and dedicated to schools. The idea is to propose customizable templates based on the activity that each trainer wishes to experiment from time to time and that can enrich the original idea, according to the sharing knowledge economy approach: from the tools for customizing to tools Intelligent furnishings.
Fashionable eco-friendly backpack for everyday life
This project is a home automation in miniature ... It is not a normal home automation but it is an innovative house that points to the future because it is also environmentally sustainable.
Millepiani - Anna Grossi Giardiniera Paesaggista - L'Altro Abitare Architettura Sostenibile - Wildnest Bioarchitettura e Feng Shui
Millepiani Coworking created -Healthy Home- an -open zone- to explore new tools, movements and mindsets to make cities and technologies for people. Our proposal brings together the bio-architecture and living wellness skills which are dedicated to sustainable design, using innovative materials, technologies for energy saving and the creation of living environments that promote physical and psychological wellness.
Federico Capriuoli – Acas3D; Carlo Leggieri – Celanapoli: Valeri Tiukov - INFN
Very high resolution 3D survey of an underground archaeological site located in Naples combined with innovative research with muon radiography
Antonio Budano, Federico Budano, Giacomo De Pietro e Alberto Martini
The VR application of Belle II experiment allows to visualize the interactions of the particles and their entire trajectory, from the point where they are generated to the point where they disappear.
The project showcases demonstrators and presentations on the activities in the fields of industrial and service robotics at Politecnico di Torino. Drones, Virtual Reality, Wearable Devices, Industrial robots, Service Robots for agriculture and other applications will be the protagonists of our space at Maker Faire.
5ECN Itis Paleocapa Bergamo
On the 500th anniversary of the death of Leonardo da Vinci, we made a system to measure the lift generated by the rotation of the Leonardo da Vinci aerial screw.
Presentation of the Laboratory for Robotics and Autonomous Systems (LARAS) with the University of Sarajevo/Faculty of Electrical Engineering.
06Scienza - Edoardo Bianchini, Federico Baglioni, Flavia Cappelloni, Arianna Campitelli, Beatrice Calabrò, Riccardo Schiavi, Ilaria Zappitelli, Martina Fustolo, Simona Pascucci.
Scientific experiments and interactive demostrantions of physics, chemistry, biology, ecology for adults and children through 3D viewers, microscopes and much more.
In the POP we will illustrate the research on robotics carried on in the ARSCONTROL lab.
Dipartimento di Informatica, Università di Verona
Innovation research and teaching in the new ICE Lab at University of Verona.
Paolo Rocco e Andrea Maria Zanchettin
Collaborative robotic assembly with use of vision and artificial intelligence algorithms to perceive the operator and predict his/her intention.
Consorzio Interuniversitario Nazionale per l'Informatica (CINI)
We will showcase Artificial Intelligence solutions for various application domains developed by the members of the Laboratory
Giancarlo Ferrrigno, Emilia Ambrosini, Elena De Momi, Simona Ferrante, Alessandra Pedrocchi
NearLab, since 2008, carry out advanced research in the medical robotics fields: robot assisted surgery, assistive and rehabilitative robots and Bio and Neuro-robotics.
Laboratorio Trasporti del Dipartimento di Ingegneria, Università degli Studi Roma Tre
Technologies for tracking, tracing and classifying vehicular and pedestrian flows and their use for transport engineering.
Alberto Bigazzi e gli studenti del Plinio.
Educational project aimed at demonstrating the capabilities of an electromagnetic launcher for sending Moon-produced materials to Space
Mariglen Ymeraj, Filippo Guerra, Davide Cassanelli, Giovanni Gibertoni, Giuseppe Antonello Gentile
Laser Engraver is a small CNC machine for engraving images on several materials like wood, plastic, leather and many others.
explore remote spaces just a videocall build your personal robonoise and take control from remote.
SpeechTek e i3 della Fondazione Bruno Kessler (FBK)
Artificial Intelligence solutions for linguistic evaluation and to support deaf and dyslexic children in learning.
main author: Mario D’Ettorre, Armando Altieri, Roberto Seghini co-author: Mariarosaria Emanuele, Alessandro Morello - the IoT team @ TecnoStudio Ars Innova
Led Hockey Game based on multigame Led Interactive Platform v. 2.0
Marino Attini con SCEN e supporto di Unione Italiana Ciechi e Irifor
Obiettivo del progetto LETIsmart è fornire massima autonomia e sicurezza alle persone non vedenti o ipovedenti in ambiente urbano. Il sistema si compone di due elementi da sostituire sul normale bastone bianco, senza però andare a modificare ergonomia, peso e caratteristiche di questo strumento di precisione. LETIsmart LUCE va a sostituire il segmento vicino alla punta con uno di uguali dimensioni ma capace di emettere una fonte luminosa bianca e pulsante; LETIsmart VOCE va a sostituire il manico del bastone bianco per ciechi con uno pressoché identico che all'interno contiene un sofisticato sistema che permette di informare il non vedente su quello che lo circonda.
Scuola: I.I.S. Vittorio Bachelet Nome Gruppo: HighVoltage
A table allows six blocks to slide. The subject has to put them in the correct order, then they’re checked.
Marco Baruzzo, Carlo Fonda, Gaya Fior, Sara Sossi, Erika Ronchin, Enrique Canessa
Stepper-motors controlled by Raspberry Pi and videocamera are used to point a laser beam and destroy pests (Halyomorpha halys) and mosquitoes.
Lumi Industries - Davide Marin
The first incredibly low cost DIY Open Source visible light resin 3D printer for smartphone. A maker must have!
An experimental exhibition in Augmented Reality on less-known facts and curiosities about the lunar missions from the 60s to our days promoted by EduTech Codemotion Kids Research and Development.
Nina Aleksic, Annapaola Di Pierro, Ginevra Gallo Perozzi, Chiara Quattro, Alice Raimondi Crainz
Lup is an interactive game for children able to develop memory, reactivity and competition.
This is a project for a large 3D CNC router kit. It is easy to ship, mount, use and secure to operate. It offers all the feature of an industrial machine but is affordable.
Il progetto è stato realizzato nel corso di Cyber-Physical Systems, gli autori sono: Federica Pascucci, Sara Acquaviva, Elena Bernardini, Matteo Castellani, Gianmarco Frangini, Filippo Magri, Giulia Perri, Jie Tan.
MAESTRO is a smart bin able to recognize and properly recycle thrash using artificial intelligence
Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome
Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome.
Marta Baratto, Silvestro Roatta e Marco Testa
Device for assessment and traning of force supply and control in pinch and bite activity
"Maintenance 4.0 for Dr Robot" is an advanced maintenance system at the service of an innovative surgical robot developed by the start-up Valuebiotech.
LabMACS (Laboratory of Modeling, Analysis and Control for Dynamical Systems), Dipartimento di Ingegneria dell'Informazione, Università Politecnica delle Marche
Research and Development of Robotic Systems at Università Politecnica delle Marche
Alessia Crova, Andrea Cattaneo, Benedetta Torti, Lorena Baiocchi, Silvia Rossetti
Marvel - Toys for all is an intercative game that encourages blind kids and not, to learn the braille alphabet and inclusion
Sindaco Vito - Perito Elettronico
MASTER CLICK: command interface to allow, improve the accessibility and usability of the computer or smartphone for disabled people.
Riccardo Andrea Carletto, Alessio Varesano, Claudia Vineis
Research and innovation of textile materials, sustainability of industrial transformations and functionalization of textile fibers for conventional and technical applications.
4 - 5 Elettronica - IPSIA "Antonio Guastaferro" - San Benedetto del Tronto (AP)
Mec_Lab 4.0 is a Mechatronics IoT system (Internet of Things), able to reproduce on a scale model some steps of an industrial production process. The integrated App. IoT allows to send the production data to a Cloud, as well as some enviromental sizes (Temperature, humidity and air quality (VOC)) in the workplace.
Fanny Ficuciello, Rocco Moccia, huan Liu, Pasquale Ferrentino
PRISMA Hand II is a mechanically robust anthropomorphic robot hand. Portable dVRK is a simulator of da Vinci robot.
Luca Gallelli, Erika Cione, Maria Cristina Caroleo, Roberto Cannataro, Domenico Apa
Biomelocular screening for either lung disease and for early differentiation between viral or bacterial infection