Exhibitors 2019


Result for TAG "Science"



Pietro Amodeo (ICB-CNR), Francesco Castelluccio (ICB-CNR), Salvatore Donadio (ICB-CNR), Alessandra Rocco (INO-CNR), Simona Mosca (INO-CNR), Maria Parisi (INO-CNR), Valentina Di Sarno (INO-CNR), Gianluca Notariale (INO-CNR) - a cura di: MoSeF – ICB-CNR,
RoFlEx is a robotic exhibit to demonstrate fluorescence and spectroscopy, representing an attractive and effective tool for science communication.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Nicola Coppedè, Andrea Zappettini, Michela Janni, Filippo Vurro, Riccardo Manfredi
Bioristor is and innovative biocompatible sensor to monitor plant sap
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Tiziana De Filippis, Leandro Rocchi, Patrizio Vignaroli, Elena Rapisardi, Bruno Guerzoni
Climate Services Open Source for developing countries. Climate services are important to foster adaptation to climate risks and in reducing vulnerability in developing world contexts. 4Crop web application gives the possibility to evaluate impacts due to drought stress during the whole crop growing cycle in Sahelian areas. SLAPIS (Système Local d’Alerte Précoce pour les Inondations de la Sirba) enhances the capacity of Niger Institutions to forecast, alert for and manage floods.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Ramona Magno, Tiziana De Filippis, Edmondo Di Giuseppe, Elena Rapisardi, Leandro Rocchi
Drought dynamics reveal a time gap between the onset of a drought event and the management of the drought emergency, but often this gap is too wide to effectively reduce the impacts. The Drought Observatory (https://drought.climateservices.it/en/) developed by CNR-IBIMET could fill this gap. It is an operational system providing Open, detailed and timely information and technical support to decision-makers, water authorities, researchers and stakeholders to enhance mitigation and adaptation plans. In particular, the coupled rainfall-based and satellite-derived monitoring system both provides multiple time scale occurrence and duration of drought, and allows the assessment of vegetation conditions at different spatio-temporal scales.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Paolo Cignomi; Visual Computing Lab – ISTI CNR
Advanced technologies for innovative cast-based digital fabrication, and advanced computationally designed architectural structures
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in a functional fiber that monitors athlete dehydration by their sweat analysis
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Francesco Baldini responsible of the Chemical & Biochemical Optical Sensor Group; Romeo Bernini (IREA)
A fluorescence-based optical platform for the simultaneous measurement up to four different biomarkers in serum or plasma samples has been developed; an optical chip with thirteen different channels is the heart of the instrument. Fluorescence detection is performed by means of the implementation of a sandwich assay with the secondary antibody properly labelled with a fluorophore. Attention was focused on procalcitonin (PCT), C-reactive protein (CRP), interleukin-6 and soluble urokinase plasminogen activator receptor (suPAR), with suPAR being considered in the last years as an important prognostic biomarker for sepsis. Two measurement campaigns have been carried out with the developed device at the Attikon University Hospital (Athens, Greece) and at Center for Sepsis Control and Care of the Universitätsklinikum Jena (Jena, Germany).
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Francesco Baldini responsible of the Chemical & Biochemical Optical Sensor Group; Romeo Bernini (IREA)
Nanodem: an optical platform for multiple therapeutic drug monitoring in transplanted patients
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Mauro Rossi
Nutraceuticals that induce tolerance to wheat gluten, for the diet of at risk-subjects.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Piero Toscano, Leandro Rocchi, Riccardo Dainelli, Alessandro Matese, S. Filippo Di Gennaro
AgroSat combines digital technologies (IoT and Big Data) and scientific research products to create a collaboration platform that allows end-users to access, share, consult data – info – knowledge and plan actions. AgroSat is a full free open source platform and works from any web-browser and devices.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Nicola Coppedè, Andrea Zappettini, Matteo Beccatelli, Marco Villani
Signal Gorup of IMEM CNR has developed innovative pressure sensor integrated in flexible porous polymer, used ina plantar sole for monitoring walking positions
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

From CNR: PhD. Antonello Bonfante, PhD Eugenia Monaco, PhD Piero Manna, Dr. Maurizio Buonanno, Dr. Andrea Esposito and Giovanni Cantilena From Israeli partner: Prof. Anna Brook, Dr. Keren Salinas, Emanuel Levitin, Ron Segal
LCIS DSS Project: an advanced Low Cost system for farm Irrigation Support
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

IAS-Lab (Intelligent Autonomous Systems Laboratory), University of Padova
The SPIRIT project is a research project funded by the European Union which aims at developing a general inspection robot framework that takes the step from programming complex inspection tasks to configuring such tasks. This includes inspection tasks that use image-based sensors and require a continuous motion to fully scan a part’s surface. SPIRIT will substantially reduce the engineering costs when setting up inspection robots in industrial environments.
  C3 (pav. 9) - Università degli Studi di Padova
 2019

Roberto Colucci
Like in the 1890, we can produce tasty Ice Creams at home, using Ice and Salt as cooling mixture.
  D3 (pav. 3) - Roberto Colucci
 2019

David Massaroni e Liberati Simone
For years, Climax has been working in the field of education, education and the development of workshops suitable for students of all levels. We have always given great importance to the teaching methodology and we usually opt for the most innovative solutions that seek to stimulate curiosity in the student and that are at the same time capable of showing the charm of Science.
  B20 (pav. 7) - Climax s.c.a r.l.
 2019

Daniele Paesani
A fully-automated miniaturised photometric analyser for water monitoring featuring SLA 3D printed opto-fluidic components. Applications include environmental monitoring, hydroponic/aquaponic automation, industrial process control and much more.

Agenzia Spaziale Italiana
ASI was founded in 1988. Its purpose was to coordinate all of Italy's efforts and investments in the space sector that had begun in the 1960s. ASI has become on …
  B15 (pav. 7) - Agenzia Spaziale Italiana
 2019

Isabella Pisano, Elena Ciani
Value chains designing applied to agro-industrial by-products is a innovative approach in order to increase social and environmental sustainability.

Giuseppe Massaria, Antonio Idà
ALAN-2 is a tracked Robot for military use. It has GPS, supports automatic learning, autonomous navigation and the NAV function with which it is possible to give a mission. The ROS system combined with a Neural Network provide access to the A.I. It is equipped with a Smart Charging Station (custom).

British Interplanetary Society
Set of practical activities designed to introduce about Apollo lunar missions in an funny and engaging way.

Colegiu Tehnic Gheorghe Cartianu, grades 9-12
Main objective: the development of technological education in order to have well-prepared students which can be capable to master and efficiently explore the new technologies.

Unione Astrofili Italiani
AstroMakers from the past: how to measure Earth and time with no batteries, no PC and no internet
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

Unione Astrofili Italiani
Crafting, passion and astronomy knowledge applied to astronomy popularization and inclusion, because everyone has the right to “see the stars”

Unione Astrofili Italiani
This Project presents the design and construction guidelines for a small personal remote observatory
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

Dott. Francesco Maria Bucarelli, Dott. Giacomo Peroni, Dott.ssa Cristiana Cireddu
"black garlic" means a processed product obtained by prolonged heat treatment of fresh garlic.
  C12 (pav. 3) - FOSAN
 2019

Walter Setti, Monica Gori
Novel technological solutions for the learning of mathematical concepts in primary schools and for the training of cognitive skills
  E6 (pav. 7) - Istituto Italiano di Tecnologia
 2019

Valerio Nappi
An Arduino based true random number generator fueled by bananas.
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

Studenti e laureandi che operano nel Laboratorio di Oleodinamica e Pneumatica del Dipartimento di Ingegneria – Sezione Meccanica
A test-bed has been set up to carry out experimental activities on multiphase flows. The facility is based on a modular architecture, thanks to which the various functions such as the electric drive, the thermal conditioning and the filtration of the fluid, the high-pressure circuit and the test sections are inter-connected in a single structure. The management of the automatic functions of the bench has been implemented on open hardware (Arduino UNO).
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Giovanni Bernardini, Massimo Gennaretti, Jacopo Serafini, Valerio Vezzari
Robotized test bench equipped with structural monitoring FBG fiber optics sensors , dedicated to real time structural characterization of aeronautical parts.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Studenti frequentanti le quarte classi indirizzo Biotecnologia. KA2 Erasmus plus school project: Be a maker @ school, IIS Galileo Galilei, Jesi (AN)
Using 3D printers to produce molecular biology laboratory techniques to schools by using the tools created by students.
  A16 (pav. 5) - IIS Galileo Galilei - Jesi (AN)
 2019

Black Brain Robotics Inventor.
The black brain creative robotics mechanism project.
  D2 (pav. 6) - Inventor felix
 2019

Michelangelo Bornò, Franco Ferrini
Robotic arm, with six (6) degrees of freedom, made with a new type of 'back-lash free' articulation.
  F46 (pav. 8) - Michele & Franco
 2019

CampuStore
CampuStore brings new ideas and visions at Maker Faire Rome, again: close to the Kids Area organized by Codemotion Kids!, CampuStore takes part to the exhibitio …

Carlo Alberto Pinto
Captiks provides innovative systems for motion analysis by using wearable sensors for Sport, Rehabilitation and Research
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Corrado Costa, Simone Vasta, Francesca Antonucci, Francesco Tocci
LoRa based on open source technology for precision irrigation and remote field traffic
  C25 (pav. 3) - CREA
 2019

Ovidiu Sandru
Chargie is a USB device that stops phone battery degradation by automatically limiting phone charging, while you sleep.
  A12 (pav. 3) - Lighty Electronics
 2019

CHIMICA INDOSSABILE
Creation of a wearable chemical device, designed for sweat collection and chemical analysis for monitoring and diagnosing patients’ or sportsmen’ s health.

Bernardo Monechi, Enrico Ubaldi, Vittorio Loreto
Citychrone is an interactive experience that allows common citizens to explore and design public transport scenarios.

Mat Toan
Cluster is a holographic polygon that reflects the reality it has in front of itself by modifying its shape with each perceived sound.

Alessandro Scano
The analysis of synergies (muscular and kinematic) is a cutting-edge method for the study of motor control of healthy subjects with motor disabilities. The method is based on the concept that the central nervous system coordinates muscles and joints according to predefined schemes that simplify the ability to perform complex movements. Both in laboratory and in clinical settings, synergies are calculated through the use of special sensors and instrumentation. Synergy Lab presents some applications in the muscular field related to the upper limb and muscle-kinematics related to the use of the hand for grasping. Furthermore, Synergy Lab will present an application based on a Kinect V2 commercial sensor that allows synergies to be applied even with low-cost technologies, in various contexts
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Prof. GUENDALINA GRAFFINGNA
Engaging patients in their heathlcare and wellbeing: the PHE-S (Patient Health Engagement Scale) and its possible applications in the digital health era
  A15 (pav. 7) - Università Cattolica del Sacro Cuore
 2019

AETERE'S - Andrea Amato, Roberto Amato, Roberto Zucchelli
AEtere's technology works on the condensation of the electromagnetic energy due to the steady increase of high frequency technology that taints the electric network creating a new kind of pollution named Dirty Electricity

Giancarlo Pellis
The project aims to have a control tool to keep an exoskeleton in balance during flexion-extension of the lower limbs.

Scuola di Ingegneria Aerospaziale
Microgravity and geomagnetic field simulator for the experimental testing of CubeSat attitude determination and control systems.
  E24 (pav. 7) - Scuola di Ingegneria Aerospaziale
 2019

Riverview High School, Science 10, Physics 12
Students design, solder and 3D print lights and distribute students who are living in light poverty. @TeachSDG Education and Energy.

Department of Excellence in Biotechnology , Chemistry and Pharmacy
From waste to resource

Valerio Miceli
Estrazione del lattosio da siero di latte per la produzione di bioplastiche 100% biodegradabili verso un' industria smart e sostenibile

Annamaria Bevivino
SIMBA - SUSTAINABLE INNOVATION OF MICROBIOME APPLICATION IN THE FOOD SYSTEM

Marcello Bonfè, Emiliano Mucchi, Federico Contro, Alessio Sozzi
Collaborative robotics for industrial production monitoring, diagnosis and quality control, integrating advanced noise and vibration analysis techniques.
  C6 (pav. 9) - MechLav - Tecnopolo dell'Università di Ferrara
 2019

Elio Romano, Alex Filisetti, Annamaria Stellari
This project is part of a broader research project concerning precision agriculture, that is, that set of techniques that allows reducing the use of inputs in agriculture (water, fertilizers, plant protection products, labor, processing, etc.) while increasing yields thanks to intelligent systems that, monitoring the environmental conditions, provide information and early warnings to farmers who will be able to intervene more effectively and in a targeted manner, gradually abandoning the rigid patterns of the past.

Marco Baruzzo, Carlo Fonda, Sara Sossi, Gaya Fior, Erika Ronchin, Enrique Canessa
This DIY "Cloud Chamber" makes visible to the naked eyes a number of tracks of elementary particles like electrons, protons and muons.
  B13 (pav. 3) - ICTP SciFabLab - Trieste
 2019

Duckietown Foundation
The state-of-the-art robotics and AI education and research platform designed to enable the makers of the next generations of autonomy.

Alessio Vaccaro
The objective of the project was the realization of a monitoring and control device capable of self-feeding exploiting the energy resources of the surrounding environment.

EMC Elettronica Srl
Elettronica Open Source is a blog born in 2006 with the aim of spreading quality articles and allowing the exchange of ideas and experiences between electronics …

ENI
Eni is an energy company engaged in oil and natural gas exploration, field development and production, as well as in the supply, trading and shipping of natural …

Martin Romeo
innovation, 3dprint, interactivity, interaction design, visual art, profume, arduino, raspberry, essential oil, fragrance, technology, hybrid, premiere, smartphone, image, color, percentage, multimedia, led, art

ESA/ESRIN and the Φ-Lab
Come experience the Earth and the Moon in Virtual Reality and get to know more about ESA and Φ-Lab activities!

Sapienza Università di Roma - Saperi&Co
Sapienza Università di Roma attends the Maker Faire 2019 - with the coordination of Saperi&Co. research and service infrastructure of the Sapienza University of Rome, whose aim is to promote outstanding applied research and to support innovation , with 18 related Departments, 4 lab on demand, a Fab Lab, a Workshop, a Coworking and a Training area, will open in October 2019. The theme chosen is "Experiment it - Do it - Play it", to talk about applied research topics with a high rate of innovation that Sapienza expresses in various fields and disciplines, from research up to the realization of real and true own products.

Team: Idealizer: Weslley Lioba Caldas Coordinator: José Gleisson da Costa Germano Advisor: Sandro Costa Mesquita Researcher: Tiago Diógenes de Araújo
The project consists in a glasses for visually impaired with the objective of aid the user's displacement,giving a better independence.
  A4 (pav. 6) - Pixels Escola de Design e Tecnologia
 2019

Marco Faimali, Nicoletta Nesto, Fantina Madricardo, Fedra Francocci
Plastic and its multiple uses have changed our lives in just a few years. Yet the use we make of it has caused a heavy pollution of the places we live in up to compromising our environment and having repercussions on our health. Communicating the new technologies, materials and uses we can do to create a dialogue aimed at finding solutions.
  B9 (pav. 3) - Nicoletta Nesto, Fedra Francocci, Martina Pierdomenico, Giulio Pellini
 2019

Fondazione Bruno Kessler
FBK is a public research Institute in Italy, ranked at the top places for scientific excellence within different subject areas, like ICT, microelectronics, hist …
  B16 (pav. 8) - Fondazione Bruno Kessler
 2019

Nicole Nobili, Marco de Vellis, Fulvio Petti, Gianmarco valletta
Our aim is to share space knowledge in a complete new and innovative way
  C1 (pav. 7) - N. Nobili, M. de Vellis, F. Petti, G. Valletta
 2019

Jan Thar
The maker community from aachen presents some of their projects, e.g. enlighten art, done with LEDs and lasercutter, 3D printer etc. as well es some usefull projects for people with impairment.
  E22 (pav. 8) - Personal Photonics and Freie Maker
 2019

Stefano Maccagnani - Andrea Amato
Time-temperature indicator for Cold Chain monitoring. It features substances used in the food industry as well as in pharmaceuticals.

Antonio Di Giovanni
Funghi Espresso is an innovative startup, which produces fresh mushrooms in a sustainable and natural way, using the coffee grounds from the bars and restaurants of the territory as a substrate for the cultivation. In addition to the production of fresh mushrooms, Funghi Espresso is specialized in the production of substrate ready for mushroom cultivation (kit).

Michele Maris (INAF - Osservatorio Astronomico di Trieste)
Boiled or Frozen? Answering this question is the first step in finding life on other worlds.

Filippo Giannetti (Unversità di Pisa), Antonio Colicelli (Unversità di Pisa), Marco Moretti (Unversità di Pisa), Ruggero Reggiannini (Unversità di Pisa) in collaboration with MBI Srl Pisa and CNR-IBE Firenze.
Crafty exploitation of satellite tv signals to get accurate and capillary real-time measurement of rainfall intensity.

Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems

Valerio Joe Utzeri; Anisa Ribani; Samuele Bovo
GRIFFA controls food DNA using innovative technologies and algorithms by detecting ingredients, allergens and pathogens in food.
  D16 (pav. 3) - Valerio Joe Utzeri; Anisa Ribani; Samuele Bovo
 2019

STEAM Atelier
HAELLO is an open innovation project around wearable technologies in artistic disciplines that involve the use of the body and data, both physical and biological, produced by it.

Fondazione Mondo Digitale
The European Holomakers project approaches high school students to the study of STEM subjects, thanks to new teaching methods, such as the creation of holograms and the processing of virtual images.
  D5 (pav. 7) - Fondazione Mondo Digitale
 2019

HTWK RoboCup team
The Nao-Team HTWK Leipzig partecipates in RoboCup SPL with fully autonomously NAO robots. In 2018 the team won the RoboCup.

Domenico Prattichizzo
Wearable robotic and haptic devices, applications in rehabilitation and patient assistance, virtual and augmented reality, robot teleoperation.
  C1 (pav. 9) - Università di Siena
 2019

Ingenuity Labs Research Institute
What do pendulums and walking have in common? Learn about the science behind human locomotion with your new robot companion.
  C17 (pav. 9) - Queen's University
 2019

Roberto Ricci - Biosearch Ambiente S.r.l., Prof. Alessandro Piccolo - Università Federico II di Napoli
From organic waste we can produce humic acids (HA) suitable for environmental remediation or for agricultural use.

Sebastiano Battiato
Visual Forensics Analytics is an AI-based platform which operates to support digital investigations on multimedia contents such as images.
  A33 (pav. 9) - CINI - AIIS
 2019

Alessio Saccoccio, Carlo Muzi, Alessandro Cinelli
Idroluppolo is the innovative process that overcomes the critical issues of hop’s production throught our hydroponc technology.
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Il Brevetto - Giornale delle Invenzioni
The “Genius” is the main theme of the magazine “The Patent”, the curiosity and passion for innovation are the values of an editorial staff that was born …

Associazione Creanatura - Wps multimedia
THE DESCENDER OF EARTH The Descender of Earth is a multimedial traveling experience of Natural History. The fantastic travel agency Volvola, the captain and all his crew will lead you in an educational travel toward the center of the Earth. Traveling by the Underground 0, a descender vehicle, able to cross all the layers of the planet and push itself until the center of the Earth and further.
  H11 (pav. 3) - Associazione Creanatura - Wps multimedia
 2019

Dipartimento di Architettura, Università Roma Tre; Coordinamento Prof. Stefano Converso, con V. De Ferraro, Studenti del corso di Tecniche Parametriche di Progettazione
Open Source Parks in Rome: bottom up maintenance, “Open” digital projects, produced in Fab Labs, and installed for free interaction.

Luciano Teresi, Beatrice Beco, Gianclaudio Petrazzini, Federica Fino, Raffaele Carbone, Fabrizio Anella, Angeloni Sabina, Lucio Zaccardelli, Valeria Cinelli
Experimenting mathematics with the applications of IMAGINARY.org, made to explore and interact with mathematics.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Pallottino F, Figorilli S, Menesatti P, Scarfone A.
Pilot plants based on rims technology (Recirculating Infusion Mash Systems) and temperature pid management for research & development in the brewing and distillates chains.

Paolo Merialdo, Donatella Firmani
The project aims at building a Knowledge Graph extracting facts from medieval manuscripts.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Luca Elisei
Objective of the project: development of an Industrial IoT solution able to estimate the deformations and therefore the stress of the wind turbines in order to maximize the residual life cycle and optimize the production capacity.

Centro di ricerca CREA Alimenti e Nutrizione
Researchers of the CREA Research Centre for Food and Nutrition will give tips about the correct diet, varied and balanced

Giovanni Mannara
Arduino Solar Tracker, a fast and efficient project to safeguard the environment. Solar tracker is not only easy to use but is also inexpensive.

Bernardo Monechi, Enrico Ubaldi, Vittorio Loreto
Kreyon City is an interactive and collaborative experience in which participants build sustainable cities with LEGO bricks.

Riccardo Mariani e Benedetto Scoppola
Discover how the car traffic works and how the effects of a bottleneck spread in time and space playing with us
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Federico Capriuoli – Acas3D; Carlo Leggieri – Celanapoli: Valeri Tiukov - INFN
Very high resolution 3D survey of an underground archaeological site located in Naples combined with innovative research with muon radiography
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Antonio Budano, Federico Budano, Giacomo De Pietro e Alberto Martini
The VR application of Belle II experiment allows to visualize the interactions of the particles and their entire trajectory, from the point where they are generated to the point where they disappear.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Robotics@PoliTO
The project showcases demonstrators and presentations on the activities in the fields of industrial and service robotics at Politecnico di Torino. Drones, Virtual Reality, Wearable Devices, Industrial robots, Service Robots for agriculture and other applications will be the protagonists of our space at Maker Faire.
  B24 (pav. 9) - Politecnico di Torino
 2019

5ECN Itis Paleocapa Bergamo
On the 500th anniversary of the death of Leonardo da Vinci, we made a system to measure the lift generated by the rotation of the Leonardo da Vinci aerial screw.
  D13 (pav. 5) - ITIS P. Paleocapa - Bergamo (BG)
 2019

06Scienza - Edoardo Bianchini, Federico Baglioni, Flavia Cappelloni, Arianna Campitelli, Beatrice Calabrò, Riccardo Schiavi, Ilaria Zappitelli, Martina Fustolo, Simona Pascucci.
Scientific experiments and interactive demostrantions of physics, chemistry, biology, ecology for adults and children through 3D viewers, microscopes and much more.

Dipartimento di Informatica, Università di Verona
Innovation research and teaching in the new ICE Lab at University of Verona.

Laboratorio Trasporti del Dipartimento di Ingegneria, Università degli Studi Roma Tre
Technologies for tracking, tracing and classifying vehicular and pedestrian flows and their use for transport engineering.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Alberto Bigazzi e gli studenti del Plinio.
Educational project aimed at demonstrating the capabilities of an electromagnetic launcher for sending Moon-produced materials to Space

Mariglen Ymeraj, Filippo Guerra, Davide Cassanelli, Giovanni Gibertoni, Giuseppe Antonello Gentile
Laser Engraver is a small CNC machine for engraving images on several materials like wood, plastic, leather and many others.
  F15 (pav. 8) - M. Ymeraj, F. Guerra, D. Cassanelli, G. Gibertoni, G. A. Gentile
 2019

alessandro alessandroni
bookstore with book about maker faire theme
  F11 (pav. 6) - Alessandro Alessandroni
 2019

Il progetto è stato realizzato nel corso di Cyber-Physical Systems, gli autori sono: Federica Pascucci, Sara Acquaviva, Elena Bernardini, Matteo Castellani, Gianmarco Frangini, Filippo Magri, Giulia Perri, Jie Tan.
MAESTRO is a smart bin able to recognize and properly recycle thrash using artificial intelligence

Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome

Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome.
  E10 (pav. 7) - Istituto M. Massimo Roma
 2019

Marta Baratto, Silvestro Roatta e Marco Testa
Device for assessment and traning of force supply and control in pinch and bite activity
  D15 (pav. 7) - Università degli studi di Genova
 2019

Gruppo dei raw material
Our project aims to capture CO2 using the ashes of rice combustion, rich in silica.

Riccardo Andrea Carletto, Alessio Varesano, Claudia Vineis
Research and innovation of textile materials, sustainability of industrial transformations and functionalization of textile fibers for conventional and technical applications.
  F17 (pav. 3) - Riccardo Andrea Carletto, Alessio Varesano, Claudia Vineis
 2019

Luca Gallelli, Erika Cione, Maria Cristina Caroleo, Roberto Cannataro, Domenico Apa
Biomelocular screening for either lung disease and for early differentiation between viral or bacterial infection
  A17 (pav. 7) - University of catanzaro
 2019

Annamaria STELLARI, Paolo Walter ANTONIOLI, Tiziana M.P. CATTANEO - CREA.IT Milano e Treviglio
Mini dryer and solar dehydrator for food processing, equipped with sensors in the near infrared (NIR), camera and Arduino technology for the control of physical process parameters.

Federica Andreola, Daniela Giovannini (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!
  CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science
 2019

Federica Andreola, Daniela Giovannini, Mauro Fabiani (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!

Arturo Moleti, Renata Sisto, Luigi Cerini, Filippo Sanjust
Simultaneous pressure/velocity measurements in the ear canal optimize calibration and detection of Otoacoustic Emissions for the objective diagnostics of hearing
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Globalmap
We produced physical representations of the digital terrain model of a very specific area of Mars

E. Canessa, L. Tenze
Carousel of historical or real-time stereoscopic images, converted into holograms using our Morpholo program running on Raspi 4, which allows to generate and visualize a 3D scenario with a minimum of inputs and headset-free.
  C3 (pav. 7) - E. Canessa, L. Tenze
 2019

Prof. Claudio Pugliesi: Professore associato Genetica Agraria, Dr. Marco Fambrini: Tecnico di laboratorio Genetica Agraria, Sig.ra Grazia Puntoni: Tecnico di laboratorio Patologia Vegetale, Dott.ssa Alessia Vinci: Laurea magistrale in Biotecnologie Vegeta
Development of a prototype molecular diagnostic kit for the detection of a fungal plant pathogen in the field.
  A10 (pav. 7) - Università di Pisa
 2019

Manuela Scarselli, Paola Castrucci, Matteo Salvato, Mattia Scagliotti, Maurizio De Crescenzi
We aim to coat steels with carbon-based nano-materials to prolong their life, improve their structural, mechanical properties and those of the cements that contain them
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Loretta Bacchetta, Silvia Procacci
ENEA BIOAGPROBIO and CNR-STIIMA: production of nanofibre-based electrospinning membranes made from extracts of Opuntia Ficus Indica cladodes.

Niklas Sallali
NightmareV2 is a 3kg full metal spider robot made of 26 smart servos and lot of sensors including a 3d camera and a powerful computer for autonomous navigation.

NomadZ RoboCup Team
The NomadZ from ETH Zurich is a RoboCup team, Switzerland, participated for the first time in the RoboCup 2016 Competition

Department of Excellence in Biotechnology , Chemistry and Pharmacy
New drugs and innovative energy thanks to sunlight and Rhodopsin protein

NVIDIA
NVIDIA are world leaders in Artificial Intelligence and Computer Graphics. Our Jetson 'AI at the Edge processors' are a Linux ARM SoC platform much like Raspbe …

FabLab Algeri Marino
It is a glove that allows real-time monitoring of the rider's physical condition (heart rate and oxygen percentage in the blood)

OfficineApogeo
Stereo microscopes will be available to discover new details in supposed known objects(flowers, insects). People will be free to use them.
  B19 (pav. 7) - OfficineApogeo
 2019

Leopoldo Franco; Giorgio Bellotti; Claudia Cecioni; Verdiana Iorio; Stefano De Finis; Yuri Pepi
Physical model of 3D wave propagation and interaction with maritime structures.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Beatrice Di Sero
Open Innovation project on mobility and smart cities. A real open-air laboratory that aims to stimulate companies to co-design and co-develop services for citizens, making them visible and testable within the ELIS Campus.
  A31 (pav. 9) - Elis Digital University
 2019

Martin Peterlin, Erik Kokalj
Thermal camera for Android devices, based on the MLX90640 sensor to provide an opensource, hackable, customizable, mobile thermal imager.
  C4 (pav. 7) - Martin Peterlin
 2019

Renato Reggiani
Greta Thunberg and climate change are two subjects that are too serious and important for the future of our planet to not even address them by Maker. Building an innovative educational garden with photosynthesis stimulators and sensors with BioPic school kitchen garden is for everybody.

The Paper Airplane Guy
Learn to make the best paper airplane in the world. Meet the world record holder, John Collins. See his amazing collection of paper airplanes.
  C18 (pav. 7) - The Paper Airplane Guy
 2019

Per R.Ø. Salkowitsch
A loving robot in every home.

Pi Supply
Pi Supply have a collective experience of over 50 years in designing, developing and manufacturing electronic products. The company started in 2008 and has its …

III^3D SCUOLA IALFVG di ARTIGIANATO DIGITALE
IDEA, BIT, ATOM, DIGITAL CRAFT, STUDENT, SCHOOL, TEACHING METHODOLOGY, TEACHER, INGENUITY, PLAN WITH A CHANGEABLE INCLINATION, FANTASY, ELECTRONIC, FIRMWARE, 3D, LASER CUTTING

Livia Giacomini, Giulia Mantovani, Emanuele Scalise et al. (Speak Science in collaborazione con INAF-IAPS, Università Roma Tre)
Planets in a room is a DIY low-cost kit to build a small, spherical planet and stars simulator

Luigi Palmiero, Roberta Guerini, Giuseppe Modaffari
PlanPact allows the calculation of individual merit during group work to increase motivation, quality of work and results
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Gianluca De Masi
PLASMA TECHMED is business proposal to exploit the beneficial effects of plasma medicine: disinfection and accelerated blood coagulation
  A17 (pav. 7) - University of catanzaro
 2019

Ilaria Falconi
Circular economy - Reduction of polluting gas emissions - creation of an international network of people who share the commitment and sustainable actions to work towards an ecological and environmental literacy - creation of a short chain of waste management - exploitation and re-use of the resource.
  E4 (pav. 8) - Ilaria Falconi
 2019

Scuola di Ingegneria Aerospaziale
Integrated bioanalytical system based on lab-on-chip technology for the detection of lifemarkers in planetary exploration missions
  E24 (pav. 7) - Scuola di Ingegneria Aerospaziale
 2019

Andrea Rastelli, Graziano Pepe Muzzurru, Mina Spasenovski, Mattia Yuri Messina
5 meters 3d printed model of a mosasaurus with augmented reality interactions
  F39 (pav. 8) - Andrea Rastelli,Graziano P.Muzzurru,M.Spasenovski,M.Y.Messina
 2019

Sol Bekic
Plonat Atek is a game played on an oscilloscope, where the sound and the visuals are one and the same.
  B14 (pav. 6) - Sol Bekic
 2019

Simone Caporale
Ponics designs and manufactures aquaponics systems, which combine the growth of plant species with fish farming: a clean ecosystem that produces good food for all and safeguards the planet.

Gruppo operativo SIMODROFILA
The SIMODROFILA project proposes an innovative monitoring systems for sustainable control of Drosophila suzukii and other fruit pests.
  C13 (pav. 3) - Rete Imprese Produttori Agricoli Frutta
 2019

Paolo Bonelli
ProMicroLoRa is a home-brew board that allows a LoRa modulation radio connection on the free 868 MHz frequency. It is very economical, consumes little energy, goes very far, requires little software that can be managed with the Arduino IDE and interfaces with many different sensors.

Promocatanzaro - Azienda Speciale della Camera di Commercio di Catanzaro
Promocatanzaro - Special Agency of the Catanzaro Chamber of Commerce, with the aim of spreading the digital culture among local SMEs, promotes information and t …

Artist: Joaquín Fargas. Design and realization: Elia Gasparolo
Rabdomante captures water for reuse and bridges the gap between fantasy and reality. A utopian proposal that could be accomplished. Glaciator is an art installation placed in Antarctica, composed of two robots. Their mission is to help and accelerate the ice formation process on glaciers.
  E14 (pav. 3) - Artist: Joaquín Fargas. Design and realization: Elia Gasparolo
 2019

British Interplanetary Society
Working amateur radio station via geostationary satellites and additional informations about amateur radio activities in space.
  E25 (pav. 7) - British Interplanetary Society
 2019

ReciclaGamers
From plastics to silk: bio-conversion of polyethylene by Galleria mellonellla, a larva with unique digestive properties.
  D8 (pav. 5) - Istituto Superiore E. Fermi - Mantova (MN)
 2019

Tatsuya Kaneko, Tetsuya Asai, and Hiroshi Momose (Hokkaido University)
A newly-developed reconfigurable AI accelerator for Arduino and the AI systems are exhibited. Everybody can touch and enjoy them.

Regione Lazio
Lazio Region at Maker Faire 2019 Lazio Region will be at Maker Faire again this year to show all the initiatives supporting makers, creatives and innovators …

Caterina Longo, Cataldo Pierri, Adriana Giangrande, Loredana Stabili, Graziana Basile
The REMEDIA LIFE is a project funded by the European Community in the context of LIFE environment call. The project was developed to mitigate the effects of confined off-shore fish farm on the environment thanks to the effectiveness of an innovative Integrated Mulitrophic Aquaculture (IMTA) system based on a new set of bioremediators including stress-resistant invertebrates such as polychaetes and sponges in addition to mussels and macroalgae, whose action is more effective.

Classe V A EE ISTITUTO TECNICO TECNOLOGICO " RITA LEVI MONTALCINI" ARGENTA (FE)
The device can be used both as a rehabilitation support and to restore functionality to a limb that has completely lost its strength. This exoskeleton has the function of rehabilitator-enabler that can be used by the wearer in complete autonomy.
  D10 (pav. 5) - IIS Rita Levi Montalcini - Argenta (FE)
 2019

FDG Robotic Rehabilitation Group
A model of the implementation of Robotics in clinical practice coordinated by the FDG Center in Rome.
  B27 (pav. 9) - FONDAZIONE DON CARLO GNOCCHI ONLUS - IRCCS
 2019

Matteo Berrettoni
A flashlight-pumped solid state ruby laser
  H17 (pav. 6) - Valerio N., Niklas S., Matteo B., Giacomo T., Michele C.
 2019

Claudia Zoani
Diet & food pyramid, the colors of food, packaging (formats, materials, sustainable packaging, smart-packaging), agri-food supply chain, authenticity & fraud
  C3 (pav. 3) - ENEA
 2019

Sanofi Genzyme
Sanofi is dedicated to supporting people through their health challenges. We are a global biopharmaceutical company focused on human health. We prevent illness …
  A1 (pav. 6) - Sanofi Genzyme
 2019

Sapienza Space Team
The project consist in the designing of a proto-satellite which has to simulate a space mission on a smaller scale.

Media Integration and Communication Center - Alberto Del Bimbo, Claudio Baecchi, Marco Bertini, Andrea Ferracani, Lorenzo Seidenari, Tiberio Uricchio
SeeForMe. A smart companion that walks you through the world of art.

Marco Testa, Ronny Stanzani
SENTRY is a weareable non-invasive device allowing an ecological monitoring of the subject along his rehabilitation process.
  D15 (pav. 7) - Università degli studi di Genova
 2019

TecnoSeta srl
Silk: ancient future craft. Innovation and technology in order to make silk thread by circular economy and made in Italy.

Stefano Cimei, Andrea Ugolini.
Methodology and instrumentation for the encapsulation of liquids in edible capsules of calcium alginate.

Sidereus Space Dynamics Srl.
Sidereus is a company with the aim of developing new space transportation systems through the space economy.
  C10 (pav. 7) - Sidereus Space Dynamics Srl.
 2019

Nicolò Leone, Giorgio Fontana, Zahra Bisadi, Fabio Acerbi, Lorenzo Pavesi
A compact fully-integrated photonic quantum random number generator, which is low cost, small, secure and CMOS compatible
  A16 (pav. 7) - Università di Trento
 2019

Prof Paolo Maria Rossini
EARLY PREDICTION OF ALZHEIMER DISEASE THROUGH BRAIN SIGNALS ANALYSIS
  A15 (pav. 7) - Università Cattolica del Sacro Cuore
 2019

SIXTO
Sixto is a werable robot aid that allows people with reduced hand functions to counterbalance the grip loss, or people with a normal grip to increase their grip …

Fabiana Arduini, Veronica Caratelli, Vincenzo Mazzaracchio, Noemi Colozza, Eleonora Marcoccio, Danila Moscone
Paper-based (bio)sensors for i) precision medicine, ii) evaluating polluted environmental samples and concrete artwork state, iii) fast detection of BC warfare agent
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Prof. Stefano Panzieri, Ing. Chiara Foglietta, Ing. Riccardo Colelli, Ing. Cosimo Palazzo
Is a security device able to filter out attacks to the protocol and, using deep packet inspection, to understand data injection.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Gian Paolo QUARTA
TUBE-T3 is an IoT ATEX-sensor for pressure and temperature monitoring of a fluid or gas, with battery and LTE-CatM1/NB communication.

4 AM Liceo Statale "A. Manzoni" di Latina
An exhibition of innovative products in the field of music, which exploit the technologies of FabLab and photonics
  D15 (pav. 5) - Liceo Statale A. Manzoni - Latina (LT)
 2019

Fabio Ballanti, Giovanni Saggio
Using a glove equipped with sensors it'll be possible to play a virtual piano in a three-dimensional graphic environment, just moving the hand (or both hands).
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Adriana Postiglione
It holds galaxies together, moves stars and planets and dominates the whole Universe, bending space and time. Gravity is one of the most fascinating forces in nature: discover it together.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Matteo Cristini, Alberto Nidasio
We built a drone fleet with recycled material, to be able to monitor how climate changes affects water environments.
  B3 (pav. 9) - Matteo Cristini, Alberto Nidasio
 2019

Studenti e laureanadi che operano nel Laboratorio di Oleodinamica e Pneumatica del Dipartimento di Ingegneria – Sezione Meccanica
Vehicle for experimental activities on the cooling systems of internal combustion engines. On board data acquisition (Implemented on open hardware Arduino UNO) of - the engine control unit - the operating parameters of the cooling system
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

SPQR Team - Prof. Daniele Nardi
SPQR Team is the RoboCup Team of the DIAG at Sapienza. The team is composed by 5 humanoid robots that play soccer autonomously.

Renato Reggiani
We will product an easy seeding system to eliminate plastic in agricolture.
  E14 (pav. 7) - BioPic srl
 2019

Alessia Arveni
The Scuderia Tor Vergata is a student university association founded in 2013 with the aim of competing in the International Engineering Design Competition Formula SAE.
 The competition, open to university students only, envisages the design and production of a single-seater racing, assessed during a series of static and dynamic tests. The great value of our project is to offer students participating in the possibility of developing their skills and acquiring new ones, inevitably contributing to the vocational training of the same in terms of • Group work
 • Communication
 • Technical and organizational skills
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

INAF
A journey between past, present and future technological activities by INAF
  C11 (pav. 7) - INAF
 2019

Antonio Ianiero
Thaumachines - Technologies that induce wonder. Over the last few years I have built various machines that have as common feature to do amazing things for those who look at them.
  F12 (pav. 8) - Antonio Ianiero
 2019

Carlo BISAGLIA, Elia PREMOLI, Stefano BASILE
The activity consists in the use of pressure sensors applied to a seat for agricultural tractor cabins. The project is realized by CREA-IT. The acquisition system, consisting of two mats with more than 1000 sensors, allows to have a map of the pressures exerted by the operator's body on the seat and on the seat backrest. It is currently used in experimental projects to assess seat comfort, both in the diagnostic and design phases. The false color map obtained in real time from the sensors and projected to a screen, allows the interception of areas of the body that receive excessive pressures or whose pressures persist for prolonged times.

Maurizio Calvitti, Riccardo Moretti, Elena Lampazzi, Giulia Fabbri, Giulia Lombardi
ENEA develops a new control method against the Asian tiger mosquito: innovation switches from laboratory to territory through an enterprise.

Donato Piccolo (engineering project Niklas Sallai e Marcello Mangione
A car is turned upside down like an insect and possessed steel legs that move coordinated by movement of turtles.

YOTA Italia - Marco Sartini (IU2DPM), Francesco De Giudici (IU3GNB), Luca Bennati (IU2FRL), Luca Mascanzoni (IU3BXI)
Emergency satellite radio communication system, based on the QO-100 amateur radio transponder. Practical and operational in a few moments, made with open source software.

Telespazio/e-GEOS
When users need Satellite Data, AI can help to retrieve best data at best time to get best value.

British Interplanetary Society
Educational model of the avionics systems of the Vega launcher to learn how to assemble complex systems and how a launcher works.
  E25 (pav. 7) - British Interplanetary Society
 2019

Classe IIIA Chimica - ITI Cannizzaro Catania
The class IIIA Chemistry, studied and produced natural dyes such as flavonoids, anthocyanins, tannins that can be used as dyes for fabrics in place of synthetic dyes, harmful to the environment but especially for humans.
  D11 (pav. 5) - ITI Cannizzaro - Catania (CT)
 2019

Bitjam, Francesco Fusco, Daniele Sabatini. Stefano Sabatini, Giulio Cespites
Viisible Light Communication: a tecnology thas has many application field in the real life: opening gate, send messages into the light, a car that talks to another car via headlight, safe internet in safe environments, another approach in robot communications. Our project will show you these applications pratically. We have developed prototypes that use the VLC in data communication in order to send auth tokens or multimedia messages. It's time that you know these capabilities to go beyond the immagination. Our startup Bitjam will help you in this.
  A18 (pav. 8) - Bitjam, F. Fusco, D. Sabatini. S. Sabatini, G. Cespites
 2019

Antonio Pallotti, Emanuela Tagliente, Leandro Lucangeli
Sensory suits for human kinematics, sensory socks for posturology, electroencephalographic and electromyographic bands for occupational safety

Caterina Boccato, Gabriele Cremonese, Federico Di Giacomo, Marco Dima et al. (INAF -Osservatorio di Padova)
Explore the Moon in Augmented Reality with your smarthpone!
  C11 (pav. 7) - INAF
 2019

Fabio Defabis (Autore del progetto) Giovanni Pirozzi (Logistica e distribuzione)
The Z80-MBC2 is a modern reworking of the classic microcomputer with Zilog Z80 processor, made with only 5 integrated circuits.
  B2 (pav. 8) - Z80-MBC2 un computer Z80 fatto in casa
 2019
 
Data updated on 2020-12-13 - 11.41.04 pm