Exhibitors 2019


Result for TAG "Education"



V. Sperati, B. Özcan, L. Romano, S. Scaffaro, T. Moretta, N.Faedda, V. Guidetti, G.Baldassarre
+me is an experimental interactive toy, designed like a potential tool for therapy in Neurodevelopmental Disorders.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Pietro Amodeo (ICB-CNR), Francesco Castelluccio (ICB-CNR), Salvatore Donadio (ICB-CNR), Alessandra Rocco (INO-CNR), Simona Mosca (INO-CNR), Maria Parisi (INO-CNR), Valentina Di Sarno (INO-CNR), Gianluca Notariale (INO-CNR) - a cura di: MoSeF – ICB-CNR,
RoFlEx is a robotic exhibit to demonstrate fluorescence and spectroscopy, representing an attractive and effective tool for science communication.
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

From CNR: PhD. Antonello Bonfante, PhD Eugenia Monaco, PhD Piero Manna, Dr. Maurizio Buonanno, Dr. Andrea Esposito and Giovanni Cantilena From Israeli partner: Prof. Anna Brook, Dr. Keren Salinas, Emanuel Levitin, Ron Segal
LCIS DSS Project: an advanced Low Cost system for farm Irrigation Support
  B1 (pav. 7) - Consiglio Nazionale delle Ricerche CNR4All#
 2019

Medaarch s.r.l. s.t.p
CAD is a center of excellence for training and consultancy on innovation issues, the only place in Italy dedicated to re-launching craft activities

Roberto Colucci
Like in the 1890, we can produce tasty Ice Creams at home, using Ice and Salt as cooling mixture.
  D3 (pav. 3) - Roberto Colucci
 2019

David Massaroni e Liberati Simone
For years, Climax has been working in the field of education, education and the development of workshops suitable for students of all levels. We have always given great importance to the teaching methodology and we usually opt for the most innovative solutions that seek to stimulate curiosity in the student and that are at the same time capable of showing the charm of Science.
  B20 (pav. 7) - Climax s.c.a r.l.
 2019

Andrea Chesi IIS Tito Sarrocchi Siena
The goal of the "leap - done" project is to pilot a complex system, such as a drone, using hand movement instead of a normal radio command. The sensor used to achieve this goal is a "leap motion" camera.

Carmelo Occhipinti Federica Bertini Alessandro Marianantoni
Four masterpieces of Caravaggio, Raffaello and Correggio in tactile format for an experimental approach that bridges the gap between art and accessibility

Estro technologies s.r.l.
Maestro, a world that speaks to the user.

Clementoni R&D
We would like to collect needs and ideas meeting children, makers and AI experts to discuss about AI smart toys

Andrea Bonarini, Matteo Matteucci, Francesco Amigoni
AI&Robotics Lab, established in 1973 at Politecnico di Milano. Autonomous robots and vehicles, AI, Machine Learning, Vision, Perception.

The Air Busters - IV B ITET “Rapisardi Da Vinci” - Caltanissetta
It provides real-time information on the polluting gases existing throughout the territory by surveys from mobile analysis stations.
  D19 (pav. 5) - ITET Rapisardi Da Vinci - Caltanissetta (CL)
 2019

Alberto Bigazzi e gli studenti del Plinio.
Understanding air traffic control by Making a console showing available position data transmitted by airplanes captured through Software Defined Radio
  D28 (pav. 7) - Alberto Bigazzi
 2019

Ambasciata degli Stati Uniti d'America
October 19-20, 48-hours of hacking at NASA’s International Space Apps Challenge, the world’s largest global HACKATHON. NASA Space Apps engages th …
  B24 (pav. 7) - Ambasciata degli Stati Uniti d'America
 2019

Associazione Medici di Famiglia per l'Ambiente di Frosinone e Provincia - FabLab Frosinone APS
Ancler®: simple and inexpensive real-time atmospheric monitoring. An ethical project to safeguard health and the environment, against pollution.

FONDAZIONE ITS FILIERA AGROALIMENTARE DELLA SARDEGNA
Anzone4.0 is a system designed to manage the traceability data of the IGPSardinian lamb from the stable to the slaughterhouse.

British Interplanetary Society
Set of practical activities designed to introduce about Apollo lunar missions in an funny and engaging way.

Mercato Circolare
A desk with illustrative material of our company, possibility to have fun with interactive gamification paths about circular economy, vision of our conference show, BLUE REVOLUTION, on the tv.
  B8 (pav. 3) - Mercato Circolare
 2019

Colegiu Tehnic Gheorghe Cartianu, grades 9-12
Main objective: the development of technological education in order to have well-prepared students which can be capable to master and efficiently explore the new technologies.

Una Quantum Inc
Bring digital fabrication technologies into the management of artistic and cultural heritage

Arrow Electronics Italia s.r.l.
Arrow is a global provider of products, services, and solutions to industrial and commercial users of electronic components and enterprise computing solutions. …

Unione Astrofili Italiani
AstroMakers from the past: how to measure Earth and time with no batteries, no PC and no internet
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

Unione Astrofili Italiani
Crafting, passion and astronomy knowledge applied to astronomy popularization and inclusion, because everyone has the right to “see the stars”

Unione Astrofili Italiani
This Project presents the design and construction guidelines for a small personal remote observatory
  C6 (pav. 7) - Unione Astrofili Italiani
 2019

Audiolino Team
A new standalone DSP board with ready to use audio effects with MIDI control.
  H20 (pav. 6) - Audiolino
 2019

Michele Turco
Alberto Marzaioli" Balance Bike - A wooden bike for children aged 2 to 6, which allows them to develop balance and fine motor skills. The project has no commercial purposes and has been developed for scientific / educational purposes ( Duryng the Fab Academy 2019 cycle ). The project can be downloaded for Free and replicated in any other part of the World ( FabCloud archive ).
  E21 (pav. 8) - Kromlabòro - Caserta FabLab
 2019

Walter Setti, Monica Gori
Novel technological solutions for the learning of mathematical concepts in primary schools and for the training of cognitive skills
  E6 (pav. 7) - Istituto Italiano di Tecnologia
 2019

Studenti e laureandi che operano nel Laboratorio di Oleodinamica e Pneumatica del Dipartimento di Ingegneria – Sezione Meccanica
A test-bed has been set up to carry out experimental activities on multiphase flows. The facility is based on a modular architecture, thanks to which the various functions such as the electric drive, the thermal conditioning and the filtration of the fluid, the high-pressure circuit and the test sections are inter-connected in a single structure. The management of the automatic functions of the bench has been implemented on open hardware (Arduino UNO).
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Giovanni Bernardini, Massimo Gennaretti, Jacopo Serafini, Valerio Vezzari
Robotized test bench equipped with structural monitoring FBG fiber optics sensors , dedicated to real time structural characterization of aeronautical parts.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

IIS GAE AULENTI - Biella (Gruppo ENT)
Tree robot, able to protect plants and talk to them.

The BeeBlockers - IV B e V B - ITET “Rapisardi Da Vinci” - Caltanissetta
Interchangeable teaching modules for the realization of electronic devices programmable in visual language to learn the "Coding" at school, while having fun.
  D25 (pav. 5) - ITET Rapisardi Da Vinci - Caltanissetta (CL)
 2019

Corso di Elettronica-Automazione I.I.S. “Rita Levi-Montalcini” Acqui Terme (AL)
Open source and low cost devices for blind people: Voice synthesizer connectable to everyday use equipment.
  D4 (pav. 5) - IIS Rita Levi-Montalcini - Acqui Terme (AL)
 2019

BIOVOICES, Biobridges, STAR-ProBio, LIFT, EuBioNet
The BIOECONOMY Village aims to raise awareness, improve knowledge on products of renewable origin and promote the applications and benefits of the Bioeconomy, circular economy and sustainability, encouraging dialogue, discussion and sharing between the general public and representatives of universities, research centers, projects, companies, associations and start-ups.

Studenti frequentanti le quarte classi indirizzo Biotecnologia. KA2 Erasmus plus school project: Be a maker @ school, IIS Galileo Galilei, Jesi (AN)
Using 3D printers to produce molecular biology laboratory techniques to schools by using the tools created by students.
  A16 (pav. 5) - IIS Galileo Galilei - Jesi (AN)
 2019

Blue_Boost Project - ADRION Programme
Blue_Boost project - ADRION Programme – brings together 7 partners from Italy (University of Camerino – Marche; Central Europe Initiative - Friuli …

ILIANA MORELLI
Boboto promotes Montessori pedagogy through the production of materials with new technologies, and coding and the concept of digital citizenship through workshops that encourage the active and conscious use of new technologies.

Il progetto è stato realizzato da un team distudenti e docenti della Fondazione ITS Steve Jobs in collaborazione con Paradigma soc. coop con sede a Catania
Since 1953, vending machines continue to function in the same way. Boox offers an advantageous experience for both users and sellers
  B7 (pav. 6) - ITS 4.0
 2019

Team DigiLAB Volta - Triennio Superiore Istituto Tecnologico
Robotic Arm V.I.A.
  A1 (pav. 5) - IIS Alessandro Volta - Frosinone (FR)
 2019

Michal Adamík, Andrej Chmurčiak, Balint Sallay
https://www.youtube.com/watch?v=UQhyNoIg1fI
  C10 (pav. 9) - Slovak University of Technology in Bratislava
 2019

AGILEWARE
Make your own vintage analog counter with a social aspect!

cristiana luisa marconcini, rita audino, giorgia pietraforte e valentina pietraforte
the ns. project consists in using waste material and recycling it, we use fabric, shirts, sheets, curtains, pillowcases ect ...... reinventing other products for everyday use
  F5 (pav. 3) - C.L. Marconcini, R. Audino, G. Pietraforte e V. Pietraforte
 2019

CampuStore
CampuStore brings new ideas and visions at Maker Faire Rome, again: close to the Kids Area organized by Codemotion Kids!, CampuStore takes part to the exhibitio …

Gruppo Chicken Counter
Explore with the children the world of numbers and the beauty of mathematics, stimulating emotions and interest, through a challenge between two opponents who will compete in increasingly difficult and complex levels.
  B13 (pav. 6) - Gruppo Chicken Counter
 2019

ELENA LUZI
Chokkino is the first cacao espresso, the functional beverage made with pure cacao, the perfect alternative to coffee!

Codemotion team
Codemotion Kids! is one of the most important references in Italy about the technological education for young people. The headquarters of the School of Technology and Creativity is in Rome, where the yearly workshops, Saturday Tech and AdaLabs, are taking place, during which the young participants use coding, robotics, electronics and design to create and give life to their ideas. Come and discover our activities 2019-2020!
  B12 (pav. 5) - Codemotion Desk
 2019

Prof. GUENDALINA GRAFFINGNA
Engaging patients in their heathlcare and wellbeing: the PHE-S (Patient Health Engagement Scale) and its possible applications in the digital health era
  A15 (pav. 7) - Università Cattolica del Sacro Cuore
 2019

Conrad Electronic Shop
GIVE LIFE TO YOUR IDEAS Every invention begins with an idea, with a precise image that buzzes in your head, insists and wants to be realized. This is what give …

Jasmin Velagic, Nermin Covic
The control system for both remote and autonomous controls of a hexapod robot is developed.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Giancarlo Pellis
The project aims to have a control tool to keep an exoskeleton in balance during flexion-extension of the lower limbs.

Scuola di Ingegneria Aerospaziale
Microgravity and geomagnetic field simulator for the experimental testing of CubeSat attitude determination and control systems.
  E24 (pav. 7) - Scuola di Ingegneria Aerospaziale
 2019

Riverview High School, Science 10, Physics 12
Students design, solder and 3D print lights and distribute students who are living in light poverty. @TeachSDG Education and Energy.

Silvio Potente Luca Potente
Cycled transforms the only thing that pollutes in a bicycle: The Tire!

Katelab. Anna Zaniboni, Marina Bonsi, Pamela Sambri, Francesco Gurioli
Katelab deals with investigating needs, designing, prototype and create collaborative furnishings that can act as rehabilitating elements

Timothy Frégeau, Elena Panciroli, Oriane Anita Rainero, Giorgio Ratti, Natali Ristovska
A musical instrument that allows children with motor disabilities to learn, produce music and play alongside other people.
  A3 (pav. 6) - T. Frégeau, E. Panciroli, O. A. Rainero, G. Ratti, N. Ristovska
 2019

ITS CUCCOVILLO
The objective of the project is to create a prototype capable of acquiring the moisture data from the soil and independently managing the quantity of water to be supplied to the soil to prevent the affected plant from going into water stress

DIAG Robotics Laboratory - Sapienza Università di Roma
Research activities at the DIAG Robotics Laboratory, Sapienza University of Rome.
  C16 (pav. 9) - Sapienza Università di Roma
 2019

Marco Baruzzo, Carlo Fonda, Sara Sossi, Gaya Fior, Erika Ronchin, Enrique Canessa
This DIY "Cloud Chamber" makes visible to the naked eyes a number of tracks of elementary particles like electrons, protons and muons.
  B13 (pav. 3) - ICTP SciFabLab - Trieste
 2019

Silvia Di Anselmo
Materials do it yourself is a kit dedicated to the children, with the aim of developing in children the awareness of the processes of work that lie behind the objects of our daily life.
  A2 (pav. 7) - Sapienza Università di Roma - Saperi&Co
 2019

Duckietown Foundation
The state-of-the-art robotics and AI education and research platform designed to enable the makers of the next generations of autonomy.

Joan nadal
E3bot is an Educational, Ecological and Evolutive robot to learn robotics and ecology in a fun way.

Gymnasium Vukovar, Junior class (17 and 18 years of age), second team
Our seismograph will be able to track and send all the data in real time from the accelerometer to the microcontroller Genuine Arduino MKR 1000 wifi. The collected data readings are sent to the Internet through always active Blynk server ( http://blynk2.croatianmakers.hr ), of the Institute for Youth Development and Innovativity (IRIM).
  D14 (pav. 5) - Gymnasium Vukovar - Vukovar (Croatia)
 2019

Nicola Rossi, Fabio Roveti
e•fló a bracelet with invisible technology, alerting children away !! Thanks to a slight vibration.
  H2 (pav. 6) - Nicola Rossi ,Fabio Roveti
 2019

Alessio Vaccaro
The objective of the project was the realization of a monitoring and control device capable of self-feeding exploiting the energy resources of the surrounding environment.

EMC Elettronica Srl
Elettronica Open Source is a blog born in 2006 with the aim of spreading quality articles and allowing the exchange of ideas and experiences between electronics …

Eni

ENI
Eni is an energy company engaged in oil and natural gas exploration, field development and production, as well as in the supply, trading and shipping of natural …

ESA/ESRIN and the Φ-Lab
Come experience the Earth and the Moon in Virtual Reality and get to know more about ESA and Φ-Lab activities!

Walter Stor
With Evolving Virtual Room, you enter paintings and works of art from every era, immovable sculptures and exhibits materialize and become interactive in the middle of the room.
  Sala Hortensia - Walter Stor - Ideatore e fondatore del gruppo di ricerca indipendente Evolving
 2019

Sapienza Università di Roma - Saperi&Co
Sapienza Università di Roma attends the Maker Faire 2019 - with the coordination of Saperi&Co. research and service infrastructure of the Sapienza University of Rome, whose aim is to promote outstanding applied research and to support innovation , with 18 related Departments, 4 lab on demand, a Fab Lab, a Workshop, a Coworking and a Training area, will open in October 2019. The theme chosen is "Experiment it - Do it - Play it", to talk about applied research topics with a high rate of innovation that Sapienza expresses in various fields and disciplines, from research up to the realization of real and true own products.

Fabrizio Di Vittorio
VGA Controller, PS/2 Mouse and Keyboard Controller, Graphics Library, Game Engine and ANSI/VT Terminal for the ESP32
  E27 (pav. 8) - Fabrizio Di Vittorio
 2019

Associazione Verona FabLab
The FabVan (Fabrication Van) is a mobile experimental laboratory for social innovation provided for the local community.

Marco Faimali, Nicoletta Nesto, Fantina Madricardo, Fedra Francocci
Plastic and its multiple uses have changed our lives in just a few years. Yet the use we make of it has caused a heavy pollution of the places we live in up to compromising our environment and having repercussions on our health. Communicating the new technologies, materials and uses we can do to create a dialogue aimed at finding solutions.
  B9 (pav. 3) - Nicoletta Nesto, Fedra Francocci, Martina Pierdomenico, Giulio Pellini
 2019

Federica Caruso, Serpil Erdönmez, Lara Ferruccio, Martina Spinelli, Marco Bencivenga
A pair of glove that allows children with dyscalculia to learn, understand and memorize math, in particular, the table numbers.
  B1 (pav. 6) - F. Caruso, S. Erdönmez, L. Ferruccio, M. Spinelli, M. Bencivenga
 2019

Be-Team another amazing project by yu-scan Ltd
Taking your EEG brain signals and its up to you to make a storm. Or maybe destroy your opposition. Come play.

Carmelo Fallauto
Rechargeable and with multiple light sources. That's the real multifunction pocket torch to travel around safely in the city jungle.

Fondazione Bruno Kessler
FBK is a public research Institute in Italy, ranked at the top places for scientific excellence within different subject areas, like ICT, microelectronics, hist …
  B16 (pav. 8) - Fondazione Bruno Kessler
 2019

Paolo Roselli, Jean Vanderdonckt, Lorenzo Luzzi, Nathan Magrofuoco
Shapes of triangles are quantified. Distance between shapes is computed. Decomposing gestures into triangles allows to recognize gestures.
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Alessio Corno
Small electric competition vehicle, suitable for children and teenagers
  D37 (pav. 5) - Alessio Corno
 2019

Antonio Di Giovanni
Funghi Espresso is an innovative startup, which produces fresh mushrooms in a sustainable and natural way, using the coffee grounds from the bars and restaurants of the territory as a substrate for the cultivation. In addition to the production of fresh mushrooms, Funghi Espresso is specialized in the production of substrate ready for mushroom cultivation (kit).

Gianluca Ciuffreda, Alessandro De luca
Let's have fun while learning electronics and building smart devices ! Programmable electronic boards in assembling kit, equipped with schematics, components and instructions so that users can have fun while learning electronics.

Michele Maris (INAF - Osservatorio Astronomico di Trieste)
Boiled or Frozen? Answering this question is the first step in finding life on other worlds.

Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
Gemini is a smart DC motors controller for application that requires constant speed.
  E9 (pav. 8) - Samuele D'Angelo, Francesco Brocca, Vittorio Ludovico Viero
 2019

Jocelyn Grace Pericotti, Tommaso Formica, Marco Diliberto, Alessandro Belotti
Geometry is looking at the world through a child eyes
  A37 (pav. 7) - J. G. Pericotti, T. Formica, M. Diliberto, A. Belotti
 2019

Amy Beaulisch
The Giant Breadboard is meant to acquire knowledge and understanding about basic electronic principles and facts and to train skills in breadboard prototyping in a playful way.

Emanuele Della Volpe
Development of innovative multi-functional technological solutions through aerial, terrestrial and marine interconnected Unmanned Systems

Francesco Rodighiero (Tutor), Ludovico Russo (Sviluppo Software ed Elettronica), Alessio Crivelli (progettazione 3D e Hardware), Teo Bistoni (Supporto programmazione), Daniela Meroni (Organizzazione, supporto sviluppo e collaudo), Rossella Indaco (Support
A tactile map of Italy presents buttons for each region. When the buttons are pressed, audio tracks are reproduced that describe various aspects of the region.
  A16 (pav. 6) - Hackability, Associazione Senza Fine di Lucro
 2019

STEAM Atelier
HAELLO is an open innovation project around wearable technologies in artistic disciplines that involve the use of the body and data, both physical and biological, produced by it.

Hoist Finance
Hoist Finance is a trusted debt restructuring partner to international banks and financial institutions. We are specialised in serving banks in handling non-per …

Fondazione Mondo Digitale
The European Holomakers project approaches high school students to the study of STEM subjects, thanks to new teaching methods, such as the creation of holograms and the processing of virtual images.
  D5 (pav. 7) - Fondazione Mondo Digitale
 2019

TheEngineRoom/EMAROlab, Università di Genova
HRI++ aims at showcasing possible, futuristic human-robot interaction modes.

HTWK RoboCup team
The Nao-Team HTWK Leipzig partecipates in RoboCup SPL with fully autonomously NAO robots. In 2018 the team won the RoboCup.

Ingenuity Labs Research Institute
What do pendulums and walking have in common? Learn about the science behind human locomotion with your new robot companion.
  C17 (pav. 9) - Queen's University
 2019

ISTITUTO TECNICO TECNOLOGICO "L. DA VINCI" DI VITERBO CLASSE: 3^B ad indirizzo Informatica e Telecomunicazioni (articolazione INFORMATICA)
The Intelligent Baby Pillow is an electronic device finalized to prevent the accidental abandonment of children alone in the car.
  D16 (pav. 5) - ITTS L.Da Vinci - Viterbo (VT)
 2019

IED Istituto Europeo di Design SpA
Istituto Europeo di Design was founded in 1966, product of the remarkable vision of Francesco Morelli. Today IED is the only Higher Education Institution in the …
  A17 (pav. 3) - IED Istituto Europeo di Design SpA
 2019

Emiliano gatti, Gianluca Meola
The first educational robotics kit on Leonardo da Vinci, a kit to learn Leonardo's history and inventions in a technological key, training logic and developing problem-solving skills in kids.
  F4 (pav. 8) - Italmaker
 2019

Associazione Creanatura - Wps multimedia
THE DESCENDER OF EARTH The Descender of Earth is a multimedial traveling experience of Natural History. The fantastic travel agency Volvola, the captain and all his crew will lead you in an educational travel toward the center of the Earth. Traveling by the Underground 0, a descender vehicle, able to cross all the layers of the planet and push itself until the center of the Earth and further.
  H11 (pav. 3) - Associazione Creanatura - Wps multimedia
 2019

OpenDot Fab Lab
Co-design for healthcare method: a way to support healthcare professional to innovate using technologies (even if they don't know how)
  A24 (pav. 6) - OpenDot Fab Lab
 2019

Dipartimento di Architettura, Università Roma Tre; Coordinamento Prof. Stefano Converso, con V. De Ferraro, Studenti del corso di Tecniche Parametriche di Progettazione
Open Source Parks in Rome: bottom up maintenance, “Open” digital projects, produced in Fab Labs, and installed for free interaction.

Classe 5 C anno scolastico 2018-2019 - I.I.S. Amedeo Avogadro di Abbadia San Salvatore
Mixing plant controlled by PLC and equipped with conveyor belt. The mixing plant allows to carry by means of a conveyor belt an empty container from the stock of containers to a load cell. In the load area the container is filled with liquids contained within two tanks until it has reached the maximum weight fixed in the PLC program. When it gets filled, the recipient is carried from the load area to the area in which an operator can pick up it.
  D29 (pav. 5) - Istituto Avogadro - Da Vinci - Abbadia San Salvatore (SI)
 2019

Caris, ateneo dell’università di Roma Tor Vergata per l’inclusione- referente Prof Pier Gianni Medaglia ImpReading Software – referente Elena Imperiali CEO
ImpReading the new study methodology created for dyslexics and suitable for everyone. Read with ImpReading Font study with ImpReading App
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

SIRSLab Group
INBOTS project brings together experts from different disciplines and European countries involved in the understanding and acceptance of Interactive Robotics.

Luca Elisei
Objective of the project: development of an Industrial IoT solution able to estimate the deformations and therefore the stress of the wind turbines in order to maximize the residual life cycle and optimize the production capacity.

Fondazione ITS D.E.Mo.S.
The project was created with the aim of modifying the production process of peeling almonds through the use of innovative technologies.

Centro di ricerca CREA Alimenti e Nutrizione
Researchers of the CREA Research Centre for Food and Nutrition will give tips about the correct diet, varied and balanced

Maria Buoncristiano, Luciano Florio e Donato Manta
The project aims at making Braille known and promoting it by making it become every child's heritage.
  A7 (pav. 6) - Unione Italiana dei Ciechi e degli Ipovedenti ONLUS - Potenza
 2019

Marco Ronchetti, Tiziano Lattisi, Hyeon Kyeong Hwang
Multimedia Recording box is IoT based solution that transforms lectures into digital canvas where students can annotate, collaborate and review.
  A16 (pav. 7) - Università di Trento
 2019

Fondazione Mondo Digitale
Kit:Cut is ambitious research project promoted by Fondazione Mondo Digitale and dedicated to schools. The idea is to propose customizable templates based on the activity that each trainer wishes to experiment from time to time and that can enrich the original idea, according to the sharing knowledge economy approach: from the tools for customizing to tools Intelligent furnishings.

Federico Capriuoli – Acas3D; Carlo Leggieri – Celanapoli: Valeri Tiukov - INFN
Very high resolution 3D survey of an underground archaeological site located in Naples combined with innovative research with muon radiography
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Antonio Budano, Federico Budano, Giacomo De Pietro e Alberto Martini
The VR application of Belle II experiment allows to visualize the interactions of the particles and their entire trajectory, from the point where they are generated to the point where they disappear.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Robotics@PoliTO
The project showcases demonstrators and presentations on the activities in the fields of industrial and service robotics at Politecnico di Torino. Drones, Virtual Reality, Wearable Devices, Industrial robots, Service Robots for agriculture and other applications will be the protagonists of our space at Maker Faire.
  B24 (pav. 9) - Politecnico di Torino
 2019

5ECN Itis Paleocapa Bergamo
On the 500th anniversary of the death of Leonardo da Vinci, we made a system to measure the lift generated by the rotation of the Leonardo da Vinci aerial screw.
  D13 (pav. 5) - ITIS P. Paleocapa - Bergamo (BG)
 2019

Jasmin Velagic
Presentation of the Laboratory for Robotics and Autonomous Systems (LARAS) with the University of Sarajevo/Faculty of Electrical Engineering.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

06Scienza - Edoardo Bianchini, Federico Baglioni, Flavia Cappelloni, Arianna Campitelli, Beatrice Calabrò, Riccardo Schiavi, Ilaria Zappitelli, Martina Fustolo, Simona Pascucci.
Scientific experiments and interactive demostrantions of physics, chemistry, biology, ecology for adults and children through 3D viewers, microscopes and much more.

Dipartimento di Informatica, Università di Verona
Innovation research and teaching in the new ICE Lab at University of Verona.

Giancarlo Ferrrigno, Emilia Ambrosini, Elena De Momi, Simona Ferrante, Alessandra Pedrocchi
NearLab, since 2008, carry out advanced research in the medical robotics fields: robot assisted surgery, assistive and rehabilitative robots and Bio and Neuro-robotics.

Alberto Bigazzi e gli studenti del Plinio.
Educational project aimed at demonstrating the capabilities of an electromagnetic launcher for sending Moon-produced materials to Space

SpeechTek e i3 della Fondazione Bruno Kessler (FBK)
Artificial Intelligence solutions for linguistic evaluation and to support deaf and dyslexic children in learning.
  E4 (pav. 7) - Fondazione Bruno Kessler
 2019

Superstuff
An exhibition to reinterpret Leonardo Da Vinci's inventions in Digital Fabrication era.

alessandro alessandroni
bookstore with book about maker faire theme
  F11 (pav. 6) - Alessandro Alessandroni
 2019

Scuola: I.I.S. Vittorio Bachelet Nome Gruppo: HighVoltage
A table allows six blocks to slide. The subject has to put them in the correct order, then they’re checked.
  A20 (pav. 5) - IIS Vittorio Bachelet - Oggiono (LC)
 2019

Codemotion Kids
An experimental exhibition in Augmented Reality on less-known facts and curiosities about the lunar missions from the 60s to our days promoted by EduTech Codemotion Kids Research and Development.
  Kids! Attraction 1 ( - EduTech Codemotion Kids Research and Development
 2019

Lup

Nina Aleksic, Annapaola Di Pierro, Ginevra Gallo Perozzi, Chiara Quattro, Alice Raimondi Crainz
Lup is an interactive game for children able to develop memory, reactivity and competition.
  E2 (pav. 6) - N.Aleksic, A.Di Pierro, G.Gallo Perozzi, C.Quattro, A.Raimondi Crainz
 2019

Il progetto è stato realizzato nel corso di Cyber-Physical Systems, gli autori sono: Federica Pascucci, Sara Acquaviva, Elena Bernardini, Matteo Castellani, Gianmarco Frangini, Filippo Magri, Giulia Perri, Jie Tan.
MAESTRO is a smart bin able to recognize and properly recycle thrash using artificial intelligence

Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome

Istituto Massimiliano Massimo di Roma, gruppo Making Open: Claudio Becchetti, Fabrizio Olati, Paolo De Gregorio, Fausto Poletto, ...
Build, Try and See Space Technologies (rockets, robots, … ) designed by the students of the Massimo Institute of Rome.
  E10 (pav. 7) - Istituto M. Massimo Roma
 2019

Francesco Re
"Maintenance 4.0 for Dr Robot" is an advanced maintenance system at the service of an innovative surgical robot developed by the start-up Valuebiotech.

Alessia Crova, Andrea Cattaneo, Benedetta Torti, Lorena Baiocchi, Silvia Rossetti
Marvel - Toys for all is an intercative game that encourages blind kids and not, to learn the braille alphabet and inclusion
  A36 (pav. 7) - A. Crova, A. Cattaneo, B.Torti, L. Baiocchi, S. Rossetti
 2019

Michele Seraglio
MASTERGROOVE: exploration and didactis of bass guitar
  H15 (pav. 6) - Michele Seraglio
 2019

4 - 5 Elettronica - IPSIA "Antonio Guastaferro" - San Benedetto del Tronto (AP)
Mec_Lab 4.0 is a Mechatronics IoT system (Internet of Things), able to reproduce on a scale model some steps of an industrial production process. The integrated App. IoT allows to send the production data to a Cloud, as well as some enviromental sizes (Temperature, humidity and air quality (VOC)) in the workplace.
  A14 (pav. 5) - IPSIA - Antonio Guastaferro - San Benedetto del Tronto (AP)
 2019

Francesco Ficili, Anna Falco, Antonio Volpe
The Mercury System is a modular HW/SW development system which simplifies design and implementation of Connectivity and IoT applications.
  E2 (pav. 8) - Francesco Ficili, Anna Falco, Antonio Volpe
 2019

Federica Andreola, Daniela Giovannini (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!
  CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science
 2019

Federica Andreola, Daniela Giovannini, Mauro Fabiani (CNR-IFT in collaborazione con INAF-IAPS, Associazione Speak Science)
Build a MicroSmartScope from your phone, and use it to study life on Earth and in space!

Gruppo Mindgames della classe 4^Arob ITIS Delpozzo, Cuneo
We thought of a new way to play videogames: we think every player should be able to play just using his mind!

Codemotion Kids
Let's live again the thrill about space missions programming robotic rovers that will move on the lunar surface!
  Kids! Attraction 2 ( - Codemotion Kids
 2019

Globalmap
We produced physical representations of the digital terrain model of a very specific area of Mars

E. Canessa, L. Tenze
Carousel of historical or real-time stereoscopic images, converted into holograms using our Morpholo program running on Raspi 4, which allows to generate and visualize a 3D scenario with a minimum of inputs and headset-free.
  C3 (pav. 7) - E. Canessa, L. Tenze
 2019

Smarted
MultiActivityBoard allows a learning through a multisensory approach, applying Tangible User Interfaces

Jasmin Velagic, Amir Nakic, Amila Sose, Dinko Osmankovic
The aim of this project was to develop the mobile robot management and navigation system using a mobile application.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Enzo Cimino / FabLabRoma/InnovationGym
MusicFabLab, an initiative born in the FabLab of the Fondazione Mondo Digitale to bring the world of music closer to that of making. At Maker Faire an interactive installation, composed of plants and Arduino sensors, will reproduce sounds and give life to a collective performance.
  D5 (pav. 7) - Fondazione Mondo Digitale
 2019

I.I.S.S. "BARTOLO" & "AGAPE" di Pachino (SR)
La tecnologia al servizio degli ultimi: come un gruppo di giovani disabili lavori fianco a fianco a dei ragazzi liceali grazie al robot NAO.
  D12 (pav. 5) - IISS BARTOLO & AGAPE - Pachino (SR)
 2019

ISS Pitagora - Classi miste - Nome del gruppo: Next Nao
Technological innovation, prototyping and implementation of a tool capable of dynamically encoding and decoding text / braille.

NomadZ RoboCup Team
The NomadZ from ETH Zurich is a RoboCup team, Switzerland, participated for the first time in the RoboCup 2016 Competition

RobotCare Team
IOT system for care olders, made up of interacting devices: kobuki, tablet, arduino, raspberry and kinect
  D18 (pav. 5) - ISIS Guido Tassinari - Pozzuoli (NA)
 2019

L. Colombo, M. Fontana, A. Merli, A. Valente, F. Vittorielli
Our game was born with the intent to make children collaborate and learn, to reduce differences and obstacles physical. Come to discover Nuvola!
  D35 (pav. 5) - L. Colombo, M. Fontana, A. Merli, A. Valente, F. Vittorielli
 2019

NVIDIA
NVIDIA are world leaders in Artificial Intelligence and Computer Graphics. Our Jetson 'AI at the Edge processors' are a Linux ARM SoC platform much like Raspbe …

Leopoldo Franco; Giorgio Bellotti; Claudia Cecioni; Verdiana Iorio; Stefano De Finis; Yuri Pepi
Physical model of 3D wave propagation and interaction with maritime structures.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Antonio Grillo, Carlo Colella, Salvatore Di Benedetto, Stefano Russo
An all-in-one board which controls all the elements and components of small CNC machines.
  A17 (pav. 8) - FabLab Napoli
 2019

Beatrice Di Sero
Open Innovation project on mobility and smart cities. A real open-air laboratory that aims to stimulate companies to co-design and co-develop services for citizens, making them visible and testable within the ELIS Campus.
  A31 (pav. 9) - Elis Digital University
 2019

Singular Devices Maker Studio
Open LED Race an minimalist cars race with a strip of LEDs
  E3 (pav. 6) - Singular Devices Maker Studio
 2019

Officine Robotiche
OR-DOMO The didactics for Home Automation. Modular and scalable project to teach Domotics at every level.

Renato Reggiani
Greta Thunberg and climate change are two subjects that are too serious and important for the future of our planet to not even address them by Maker. Building an innovative educational garden with photosynthesis stimulators and sensors with BioPic school kitchen garden is for everybody.

Silvio Scena
Modular Musical Instrument. Each module (1 octave, 12 dynamic keys ) can be used individually in stand-alone mode or assembled with others composing a full piano keyboard. The same object can be used for studio writing or recording, then musicians can use 1 or 2 octaves, or for live performances, then they can use 7/8 octaves. The modularity of the tool reduces its size, and thus favors the transportability.

Daniele GUI, Sabina MAGALINI, Pasquale MARI
The boundaries of cybersecurity in healthcare: how to provide hospitals with the best possible behavioural and governance tools?
  A15 (pav. 7) - Università Cattolica del Sacro Cuore
 2019

The Paper Airplane Guy
Learn to make the best paper airplane in the world. Meet the world record holder, John Collins. See his amazing collection of paper airplanes.
  C18 (pav. 7) - The Paper Airplane Guy
 2019

Parconier
Parconier is a Uruguayan startup, founded by Pablo, Fernando (both designers) and Gonzalo (engineer in electronics), which was formally born in 2018. It deve …

Lino Strangis
Modeled in vr and 3D printed sculptures, virtual reality experience, experimental electronic live music and more ...
  D17 (pav. 3) - Pasqualino (detto Lino) Strangis
 2019

VAHA - Virtual Architetture Handicraft Art
Hundreds of designers from Italy and the world, dozens of companies, makerspaces and fablabs for Pattern Your Life, the design of multiple patterns as pieces of a mosaic under construction for the digital revolution in manufacturing.

Pi Supply
Pi Supply have a collective experience of over 50 years in designing, developing and manufacturing electronic products. The company started in 2008 and has its …

III^3D SCUOLA IALFVG di ARTIGIANATO DIGITALE
IDEA, BIT, ATOM, DIGITAL CRAFT, STUDENT, SCHOOL, TEACHING METHODOLOGY, TEACHER, INGENUITY, PLAN WITH A CHANGEABLE INCLINATION, FANTASY, ELECTRONIC, FIRMWARE, 3D, LASER CUTTING

Livia Giacomini, Giulia Mantovani, Emanuele Scalise et al. (Speak Science in collaborazione con INAF-IAPS, Università Roma Tre)
Planets in a room is a DIY low-cost kit to build a small, spherical planet and stars simulator

I Malosios
Print your own murble run!

Ilaria Falconi
Circular economy - Reduction of polluting gas emissions - creation of an international network of people who share the commitment and sustainable actions to work towards an ecological and environmental literacy - creation of a short chain of waste management - exploitation and re-use of the resource.
  E4 (pav. 8) - Ilaria Falconi
 2019

Scuola di Ingegneria Aerospaziale
Integrated bioanalytical system based on lab-on-chip technology for the detection of lifemarkers in planetary exploration missions
  E24 (pav. 7) - Scuola di Ingegneria Aerospaziale
 2019

Andrea Rastelli, Graziano Pepe Muzzurru, Mina Spasenovski, Mattia Yuri Messina
5 meters 3d printed model of a mosasaurus with augmented reality interactions
  F39 (pav. 8) - Andrea Rastelli,Graziano P.Muzzurru,M.Spasenovski,M.Y.Messina
 2019

Francesco Burlando, Xavier Ferrari Tumay, Annapaola Vacanti
POS3D is an interactive laboratory based on the opensource robot Poppy. Visitors will be able to design Poppy's appearance by interacting with a parametric model and composing the various 3D printed elements.
  D15 (pav. 7) - Università degli studi di Genova
 2019

Sara De Franceschi
Objects for play and therapy purpose, to understand the senses and use them to learn about the world
  A25 (pav. 6) - Sara De Franceschi
 2019

Paolo Bonelli
ProMicroLoRa is a home-brew board that allows a LoRa modulation radio connection on the free 868 MHz frequency. It is very economical, consumes little energy, goes very far, requires little software that can be managed with the Arduino IDE and interfaces with many different sensors.

Promocatanzaro - Azienda Speciale della Camera di Commercio di Catanzaro
Promocatanzaro - Special Agency of the Catanzaro Chamber of Commerce, with the aim of spreading the digital culture among local SMEs, promotes information and t …

Daniele Vigo
An infinite puzzle made with laser cutting to teach words to children through programming and colors.

Team "Nao & forever" formato da: Lorenzo Manini, Luca Silva, Nasko Stamenov, Valentina Cannariato, Filippo Lin, Emanuela Braghieri, Filippo Carini, Federica Bessi, Federica Messa, Nicholas Azzini, Francesco Nicolini.
Electronic cubes allow you to solve problems related to mathematics or language, turning an educational activity into a fun activity.
  B4 (pav. 9) - Liceo Scientifico "Lorenzo Respighi"
 2019

Quasar Progetto srl
Research, design and innovation. These are the main features that have been part Quasar Institute for Advanced Design’s DNA since its foundation in 1987 …

British Interplanetary Society
Working amateur radio station via geostationary satellites and additional informations about amateur radio activities in space.
  E25 (pav. 7) - British Interplanetary Society
 2019

2nd Junior High School of Chania / SchoolSpace Team
A recreation of an 80s era home computer, designed and built from scratch using a Z80 CPU and assembly programming!
  A22 (pav. 5) - 2nd Junior High School of Chania - Chania (Greece)
 2019

Regione Lazio
Lazio Region at Maker Faire 2019 Lazio Region will be at Maker Faire again this year to show all the initiatives supporting makers, creatives and innovators …

Team ITT Giorgi
A remote controlled robot, useful for investigating disaster sites, analyze them in order to plan the rescue phase, retrieve images and estabilish an audio link with survivors
  A23 (pav. 9) - ITT Giorgi - Brindisi
 2019

riscarti festival
Marketplaces for artisans and craftpeople who transform technological waste in handmade and design products Glomoire, PlastcArt, Sabellico, BackBo
  B2 (pav. 3) - Riscarti festival
 2019

Riscarti Fest
Riscarti, international festival of upcycling (music, expo and workshop) reuses obsolete materials and garbage, to rekindle ecological intelligence, re-design the idea of useless, offering moments of sociality, art and growth. Recycling costs nothing, it’s a culture's matter!

Fondazione Mondo Digitale
Road to RomeCup2020 enhances the work of young people who develop original prototypes for international competitions and challenges launched by universities

IISS Manetti Porciatti di Grosseto. Manetti soccer team
The aim of the project is to build two high performing Robots to join RoboCup jr Soccer Open competitions.
  A4 (pav. 5) - IISS Manetti - Grosseto (GR)
 2019

DAM Bros Robotics
Robot designed to bring kids closer to programming and robotics. It offers endless possibilities for experimenting with the STEM disciplines (Science, Technology, Engineering, Mathematics).
  E15 (pav. 7) - DAM Bros Robotics
 2019

classi 4A e 4C ISS GALILEI Mirandola
We built a mobile-robot for allow to sick students to follow lessons from their home. They can watch and feel lessons by remote position, but also talking with teachers and friends.

Jasmin Velagic, Ibrahim Alispahic
The robotic machine capable to draw various shapes using graphing pen driven with three stepper motors.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

Alessandro Freddi, Emanuele Frontoni, Sauro Longhi, Adriano Mancini, Andrea Monteriù, David Scaradozzi.
Research and Development of Robotic Systems at Università Politecnica delle Marche
  C41 (pav. 9) - Università Politecnica delle Marche
 2019

MathWorks Academia
Programming and controlling robots with MATLAB and Simulink for education, teaching and research purposes.

ROME UNIVERSITY OF FINE ARTS SRL
RUFA, Rome University of Fine Arts, is a multidisciplinary, international educational centre – legally recognized by the Ministry of Education, Universit …
  B23 (pav. 7) - ROME UNIVERSITY OF FINE ARTS SRL
 2019

ITS Turismo Marche
Ma.Dì was created to improve customer communication and interaction during his stay in the accommodation through digital tools.

Pärnu Koidula Gymnasium, Form 12
Purpose of the game is to develop players knowledge about safe behaviour in the internet. This game is made for basic school students (aged 7+). In this game two teams take part. Both team has their own colour game bases, on which they have to collect same coloured shapes which are put on different places on the game board. Game buttons are Bee-Bot robots, which are easily programmable. Both team has a quiz about safe behaviour in the internet opened from their smart device. Answering right or wrong depending on their answer they get to move on. Teams have to find the fastest route to collect all the shapes from the game board and also the fastest route to the opponent team start point. On the game board there are different squares with activities which prevent or help to move on. Wins the team who has collected all the shapes and gotten first on the opponent’s starting point.
  D33 (pav. 5) - Pärnu Koidula Gymnasium - Pärnu (Estonia)
 2019

Jasmin Velagic, Anes Å ero, Amel Alicic, Dinko Osmankovic
Design and development of an autonomous two-wheels self-balancing mobile robot which works on the principle of an inverted pendulum.
  B28 (pav. 9) - University of Sarajevo/Department of Automatic Control and Electronics
 2019

WASP
Food, house, health, energy, work, art and culture. Shamballa answers at basic human needs through digital fabrication.

Francesca Vacca
Kit of molds for the sea made with biomaterial derived from shells completely biodegradable.
  A2 (pav. 7) - Sapienza Università di Roma - Saperi&Co
 2019

Alessio Coco AR+
Silence Box is a sitting stool, made by steel varnished with powder paint and a wooden bahia top. It's a lighting element created for an outdoor/indoor use
  D16 (pav. 6) - Alessio Coco AR+
 2019

Classe 4 AIM (Apparati impianti marittimi) sezione A; I.I.S. "Acciaiuoli-Einaudi" - Istituto Tecnico Nautico - Ortona (CH)
The ship, immersed in water, straightens every time is loaded a weight
  D26 (pav. 5) - IIS Acciaiuoli Einaudi - Ortona (CH)
 2019

Mauro De Sanctis, Simone Di Domenico, Ernestina Cianca, Tommaso Rossi, Davide Fioravanti
We augment wireless communication networks with RF sensing capabilities to recognize actions of people from the analysis of RF signals
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Tullia Iori, Ilaria Giannetti
SIXXIGames are serious games to educate young architects and engineers to discover construction history and italian structural engineering heritage.
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Prof. Stefano Panzieri, Ing. Chiara Foglietta, Ing. Riccardo Colelli, Ing. Cosimo Palazzo
Is a security device able to filter out attacks to the protocol and, using deep packet inspection, to understand data injection.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

I ragazzi iscritti al 1° anno del percorso ITS Tecnico superiore per la gestione e la verifica degli impianti energetici (Fondazione ITS Efficienza Energetica Piemonte - A.F. 2018/19)
A layout shows an integrate system of intelligent electricity distribution network (smart grid) for charging car batteries or for energy storage using interchargeable car battery in replacement stations.
  D11 (pav. 6) - ITS 4.0
 2019

ISTITUTO TECNICO SUPERIORE NUOVE TECNOLOGIE PER IL MADE IN ITALY, INDIRIZZO PER L'INDUSTRIA MECC. E AERO.
Development of innovative packaging models, to guarantee food traceability, correct consumer information, sustainability and design for all, through the use of augmented reality

Lab RoCoCo@DIAG - Sapienza University of Rome
Social interaction with intelligent robots
  C46 (pav. 9) - Lab RoCoCo, Dipartimento DIAG - Sapienza Università di Roma
 2019

4 AM Liceo Statale "A. Manzoni" di Latina
An exhibition of innovative products in the field of music, which exploit the technologies of FabLab and photonics
  D15 (pav. 5) - Liceo Statale A. Manzoni - Latina (LT)
 2019

Fabio Ballanti, Giovanni Saggio
Using a glove equipped with sensors it'll be possible to play a virtual piano in a three-dimensional graphic environment, just moving the hand (or both hands).
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Adriana Postiglione
It holds galaxies together, moves stars and planets and dominates the whole Universe, bending space and time. Gravity is one of the most fascinating forces in nature: discover it together.
  D34 (pav. 7) - Università degli Studi Roma Tre
 2019

Paolo Orsini, Natalia Kalinska, Diego Di Fabio, Lisa Tedeschini, Eliana Esposito, Emanuela Migliozzi.
Realization of objects and gadgets Steampunk and not handmade or with the help of electronic design and numerical control machines.

STMicroelectronics S.r.l.
About STMicroelectronics ST is a global semiconductor leader delivering intelligent and energy-efficient products and solutions that power the electronics at …

Renato Reggiani
We will product an easy seeding system to eliminate plastic in agricolture.
  E14 (pav. 7) - BioPic srl
 2019

ITS TAM Biella
Collection of fabrics for the automotive industry with recycled materials and respecting the technical parameters of the regulations governing the production of textiles.

Lorenzo Arnold, Matteo Brencic, Caterina Lauri, Bernardo Prempe, Edoardo Trombini
Interactive toy for blind children with the aim of developing their spatial perception and the association of sounds with images.
  D4 (pav. 6) - L. Arnold, M. Brencic, C. Lauri, B. Prempe, E. Trombini
 2019

INAF
A journey between past, present and future technological activities by INAF
  C11 (pav. 7) - INAF
 2019

Antonio Ianiero
Thaumachines - Technologies that induce wonder. Over the last few years I have built various machines that have as common feature to do amazing things for those who look at them.
  F12 (pav. 8) - Antonio Ianiero
 2019

Martina Basteri: educatrice / Giuseppe D'Aleo: educatore e responsabile di grafica e comunicazione della multiservizi Nausicaa del Comune di Carrara / Gabriele D'Aleo: grafico e artista digitale
A videogame that tells the causes and consequences of pollution and the benefits of recycling and separate waste collection.
  E13 (pav. 3) - Martina Basteri, Giuseppe D'Aleo e Gabriele D'Aleo - NAUSICAA Spa
 2019

Artur Coelho
ICT in 3D: portuguese educational project focused on bridging arts and technologies with 3D printing, 3D modelling, coding and robotics.
  B11 (pav. 7) - TIC em 3D: Agrupamento de Escolas Venda do Pinheiro
 2019

OpenDot e TOG
A suite of applied video games for children with disabilities
  A24 (pav. 6) - OpenDot Fab Lab
 2019

YOTA Italia - Marco Sartini (IU2DPM), Francesco De Giudici (IU3GNB), Luca Bennati (IU2FRL), Luca Mascanzoni (IU3BXI)
Emergency satellite radio communication system, based on the QO-100 amateur radio transponder. Practical and operational in a few moments, made with open source software.

LU.PA
Device for collecting and sending obsolete objects on holiday. Give your object a better future, keep LU.PA’s artwork with you.

Tino Werner
Build your own variable analog robot that can follow or avoid objects, obstacles, light, shadows, or markings on the ground.
  F21 (pav. 8) - Tino Werner
 2019

British Interplanetary Society
Educational model of the avionics systems of the Vega launcher to learn how to assemble complex systems and how a launcher works.
  E25 (pav. 7) - British Interplanetary Society
 2019

Classe IIIA Chimica - ITI Cannizzaro Catania
The class IIIA Chemistry, studied and produced natural dyes such as flavonoids, anthocyanins, tannins that can be used as dyes for fabrics in place of synthetic dyes, harmful to the environment but especially for humans.
  D11 (pav. 5) - ITI Cannizzaro - Catania (CT)
 2019

Bitjam, Francesco Fusco, Daniele Sabatini. Stefano Sabatini, Giulio Cespites
Viisible Light Communication: a tecnology thas has many application field in the real life: opening gate, send messages into the light, a car that talks to another car via headlight, safe internet in safe environments, another approach in robot communications. Our project will show you these applications pratically. We have developed prototypes that use the VLC in data communication in order to send auth tokens or multimedia messages. It's time that you know these capabilities to go beyond the immagination. Our startup Bitjam will help you in this.
  A18 (pav. 8) - Bitjam, F. Fusco, D. Sabatini. S. Sabatini, G. Cespites
 2019

Viviana Pisanelli
My works are made respecting the environment that surrounds us, reproducing animals, plants and fantasy subjects

A-Book
The haptics sensors allow the user to feel and percieve tactile feeback from VR world.

ITS Angelo Rizzoli & MakeMark company
Find out how much you move, how you eat and how you sleep and track your health thanks to W4Y: artificial intelligence at your service

Giovanni Tucci
Our project aims to discover the world of driving simulation
  A21 (pav. 7) - Università degli Studi di Roma "Tor Vergata"
 2019

Fabio Defabis (Autore del progetto) Giovanni Pirozzi (Logistica e distribuzione)
The Z80-MBC2 is a modern reworking of the classic microcomputer with Zilog Z80 processor, made with only 5 integrated circuits.
  B2 (pav. 8) - Z80-MBC2 un computer Z80 fatto in casa
 2019
 
Data updated on 2022-11-08 - 10.59.34 am